• Korean Journal of Environment and Ecology
• /
• v.25 no.6
• /
• pp.828-835
• /
• 2011

This study was conducted to understand the characteristics of bird community, migration, nesting guild, ordination analysis of observed frequency of birds at Jeju Experimental Forests (JEFs) from November 2006 to September 2007 with surveys of two areas by line transect methods and point-count methods at five areas for three consecutive days in each month. Among observed 58 species could be classified into the 24 residents, 9 summer visitors, 9 winter visitors and 16 passage migrants according to migration habit. In species composition, passage migrants are dominant birds at study areas whereas summer and winter visitors are most dominant birds at mainland's forests. We could divide two groups of bird community in the view of monthly species composition, one is November to February group, the other March to July group by ordination analysis. Number of species did not show seasonal fluctuation which is common pattern of bird community in mainland. This pattern reflects that species composition can change during breeding and non-breeding periods, but overall number of species did not change. This can be related with the high use of passage migrants at study area, also suggests that the JEFs can be highly utilized as stopover sites during migration. At mainland's forests, we can observe about five species of woodpeckers, however we just observed the only one species of White-backed Woodpeckers (Dendrocopos leucotos) at study areas. In the view of nesting guild, breeding birds can be grouped into the 9 bush-& ground nesters, 8 canopy nesters, 7 hole nesters and one house nesters. Among hole nesters, we can observe only one species of primary cavity nesters White-backed woodpecker, and the five secondary cavity nesters, that is three species of tits, tricolor flycatchers (Ficedula zanthopygia) and ruddy kingfishers (Halcyon coromanda). Therefore, White-backed woodpeckers can be regarded as a keystone species and forest practice should consider the careful conservation of this species.

• The korean journal of orthodontics
• /
• v.30 no.1 s.78
• /
• pp.53-66
• /
• 2000

This study was performed to find out the effect of projection errors on cephalometric linear and angular measurements according to head rotation during taking lateral cephalometric radiographs. Seventeen skulls with permanent dentition and no gross asymmetry were obtained from the Department of Anatomy, Medical School, Chosun University. Total 527 x-ray films were taken with $1^{\circ}$ interval from the reference position($0^{\circ}$) to ${\pm}15^{\circ}$ around the vertical axis (Z axis) which is perpendicular to the midpoint of the line connecting the center of two ear rods in submento-vertex direction. Statistical analysis was performed by paired t-test if there were statistically significant differences between the mean of the reference position($0^{\circ}$) and that of each rotation angle. The following results were obtained. 1. The projection errors of angular measurements were smaller than those of linear measurements. 2. The projection errors of angular measurements including midline landmarks were smaller than those including bilateral landmarks. 3. The horizontal linear measurements were gradually decreased when the stroll was rotated toward the film, but slightly increased and then decreased when the skull was rotated toward the focal spot. However, the changes were smaller in focal direction. 4. The projection errors of horizontal linear measurements were larger than those of vertical linear measurements. 5. The projection errors of vertical linear measurements were increased with increased distance from the rotation axis to vertical measurements. It is concluded that the use of angular measurements rather than linear measurements is recommended to minimize the projection errors.

• Journal of Life Science
• /
• v.28 no.7
• /
• pp.819-826
• /
• 2018

Orostachys japonicus (OJ) is a medicinal herb with immunoregulatory, anti-aging, anti-oxidative, and many other therapeutic properties. The purpose of this study was to elucidate the anti-cancer property of cultivated OJ. SW480 cell viability was significantly reduced by cumulative exposure to OJ extract. We also observed inhibitory effects of OJ after 72 hr through the growth and migration of SW480 cells using scratch assay. SW480 cells in OJ-free medium began to move into the scratch site at 24 hr; however, cells in medium containing OJ did not migrate into the scratch site until 48 hr. Male C57BL/6 mice (4 weeks old) were orally administered OJ extract for 31 days before injection of SW480 cells. At 7, 14, and 28 days after subcutaneous injection of SW480 cells, tumor weight and volume were analyzed. The body weight of the OJ-treated group was continuously increased during administration of the OJ extract relative to the control group. Injection of SW480 cells caused a reduction in body weight in all groups; however, the OJ-treated group exhibited a significant increase in body weight after 14 days. Tumor weight and volume were lower in the OJ-treated group than in the control group after 28 days. Although these results suggest that OJ suppresses the proliferation and migration of human colon cancer cells, additional studies are required to provide preclinical evidence before launching clinical trials evaluating OJ as an anti-cancer biohealth product.

• Restorative Dentistry and Endodontics
• /
• v.29 no.5
• /
• pp.470-478
• /
• 2004

The purpose of this study is to monitor the secretion of matrix metalloproteinase-1 (MMP-1) and tissue inhibitor of metalloproteinase-1 (TIMP-1) produced by human osteosarcoma cell line (MG63) stimulated with Prevotella nigrescens lipopolysaccharides (LPS). and to compare the level of secretion before and after the treatment of calcium hydroxide on P. nigrescens LPS. LPS was extracted and purified from anaerobically cultured P. nigrescens. MG63 cells were stimulated by the LPS (0, 1, $10{\;}\mu\textrm{g}/ml$) or LPS($10{\;}\mu\textrm{g}/ml$) pretreated with 12.5 mg/ml of $Ca(OH)_2$ for 3 days. Total RNA was isolated from the cell. and real-time quantitative polymerase chain reaction (PCR) was performed for quantification of MMP-1 and TIMP-1. The results were as follows. 1. MMP-1 mRNA expression at 48 hr was highly increased by stimulation with P. nigrescens LPS. The increase was dose-dependent. 2. When stimulated with ($1{\;}\mu\textrm{g}/ml$ of LPS. TIMP-1 mRNA expression was highly increased at 24 hr and 48 hr. However. TIMP-1 expression was suppressed at higher concentration ($10{\;}\mu\textrm{g}/ml$). 3. When P. nigrescens LPS was pretreated with $Ca(OH)_2$. MMP-1 and TIMP-1 gene expression was downregulated. The results of this study suggest that transcriptional regulation of MMP-1 and TIMP-1 by P. nigrescens LPS could be one of the important mechanisms in bone resorption of periapical inflammation. The result of calcium hydroxide on MMP-1 and TIMP-1 gene expression suppression shows that calcium hydroxide detoxified bacterial LPS and thus should be used the medication of choice for intracanal dressings in root canal infected with black-pigmented bacteria.

• Environmental Analysis Health and Toxicology
• /
• v.18 no.2
• /
• pp.89-94
• /
• 2003

Tributyltin (TBT) used world-wide in antifouling paints for ships is a widespread environmental pollutant and cause reproductive organs atrophy in rodents. At low doses, antiproliferative modes of action have been shown to be involved, whereas at higher doses apoptosis seems to be the mechanism of toxicity in reproductive organs by TBT. In this study, we investigated that the mechanisms underlying DNA fragmentation induced by TBT in the rat leyding cell line, R2C. Effects of TBT on intracellular Ca$\^$2+/ level and reactive oxygen species (ROS) were investigated in R2C cells by fluorescence detector. TBT significantly induced intracellular Ca$\^$2+/ level in a time-dependent manner. The rise in intracellular Ca$\^$2+/ level was followed by a time-dependent generation of reactive oxygen species (ROS) at the cytosol level. Simultaneously, TBT induced the release of cytochrome c from the mitochondrial membrane into the cytosol. Furthermore, ROS production and the release of cytochrome c were reduced by BAPTA, an intracellular Ca$\^$2+/ chelator, indicating the important role of Ca$\^$2+/ in R2C during these early intracellular events. In addition, Z-DEVD FMK, a caspase-3 inhibitor, decreased apoptosis by TBT. Taken together, the present results indicated that the apoptotic pathway by TBT might start with an increase in intracellular Ca$\^$2+/ level, continues with release of ROS and cytochrome c from mitochondria, activation of caspases,and finally results in DNA fragmentation.

• Journal of Preventive Medicine and Public Health
• /
• v.32 no.3
• /
• pp.361-373
• /
• 1999

Objectives: Receive Operating Characteristic(ROC) curve with the area under the ROC curve(AUC) is one of the most popular indicator to evaluate the criterion validity of the measurement tool. This study was conducted to develop a standardized questionnaire to discriminate workers at high-risk of work-related musculoskeletal disorders using ROC analysis. Methods: The diagnostic results determined by rehabilitation medicine specialists in 370 persons(89 shipyard CAD workers, 113 telephone directory assistant operators, 79 women with occupation, and 89 housewives) were compared with participant's own replies to 'the questionnair on the worker's subjective physical symptoms'(Kwon, 1996). The AUC's from four models with different methods in item selection and weighting were compared with each other. These 4 models were applied to 225 persons, working in an assembly line of motor vehicle, for the purpose of AUC reliability test. Results: In a weighted model with 11 items, the AUC was 0.8155 in the primary study population, and 0.8026 in the secondary study population(p=0.3780). It was superior in the aspects of discriminability, reliability and convenience. A new questionnaire of musculoskeletal disorder could be constructed by this model. Conclusion: A more valid questionnaire with a small number of items and the quantitative weight scores useful for the relative comparisons are the main results of this study. While the absolute reference value applicable to the wide range of populations was not estimated, the basic intent of this study, developing a surveillance fool through quantitative validation of the measures, would serve for the systematic disease prevention activities.

• Progress in Medical Physics
• /
• v.20 no.4
• /
• pp.324-330
• /
• 2009

In this study, we evaluated accuracy and usefulness of CyberKnife Respiratory Tracking System ($Synchrony^{TM}$, Accuray, USA) about a moving during stereotactic radiosurgery. For this study, we used moving phantom that can move the target. We also used Respiratory Tracking System called Synchrony of the Cyberknife in order to track the moving target. For treatment planning of the moving target, we obtained an image using 4D-CT. To measure dose distribution and point dose at the moving target, ion chamber (0.62 cc) and gafchromic EBT film were used. We compared dose distribution (80% isodose line of prescription dose) of static target to that of moving target in order to evaluate the accuracy of Respiratory Tracking System. We also measured the point dose at the target. The mean difference of synchronization for TLS (target localization system) and Synchrony were $11.5{\pm}3.09\;mm$ for desynchronization and $0.14{\pm}0.08\;mm$ for synchronization. The mean difference between static target plan and moving target plan using 4D CT images was $0.18{\pm}0.06\;mm$. And, the accuracy of Respiratory Tracking System was less 1 mm. Estimation of usefulness in Respiratory Tracking System was $17.39{\pm}0.14\;mm$ for inactivity and $1.37{\pm}0.11\;mm$ for activity. The mean difference of absolute dose was $0.68{\pm}0.38%$ in static target and $1.31{\pm}0.81%$ in moving target. As a conclusion, when we treat about the moving target, we consider that it is important to use 4D-CT and the Respiratory Tracking System. In this study, we confirmed the accuracy and usefulness of Respiratory Tracking System in the Cyberknife.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.4
• /
• pp.366-374
• /
• 2009

To determine the optimum operating conditions of the indented cylinder length grader based on varietal characteristics, broken rice removal capabilities were measured on the milled rice of 41 varieties at different conditions consisted of 3 types of indented cylinders with different indent-opening diameters and 3 different collecting-angles of broken rice. The broken rice removal capabilities were swayed by the indent's opening diameter and depth as well as the angle of the collecting trough of broken rice on the point of instrument, and by the kernel length and width as well as 1000 grain weight of milled rice on the point of rice variety. When the angle of broken rice collecting-trough reached to near the horizontal center line of the indented cylinder on the direction of upward turning side, which was referred $0^{\circ}$ in this paper, the amount of rice collected in trough increased, whereas the loss of head rice also increased. Considering the removal rate of broken rice as well as loss of head rice, it was thought that the suitable angle of trough for broken rice collecting was located $5^{\circ}$ to $15^{\circ}$ depending on varietal characteristic and indent opening diameter. It was thought that 4.2 mm or more of indent opening diameter was recommendable for the rice varieties having heavier 1000 grain weight than 22.3g, as well as larger sizes than 2.9 and 5.2 mm in width and length of rice kernel, respectively; 3.8 mm for the small-sized thin kernels, and a proper diameter between 3.8 and 4.2 mm for short to middle kernels. The varieties with relatively shorter length compared to width of kernel were more difficult to separate the broken rice than the opposite ones. For effective separation of that, it seems that some specific indent shapes such as wider opening and shallow depth etc. are required. When the broken rice content were excessively high, wider diameters of indent openings than specified sizes were thought to be the better.

• Journal of Life Science
• /
• v.24 no.2
• /
• pp.173-180
• /
• 2014

Estrogen can promote or inhibit cellular proliferation depending on tissue cell types and physiological condition and acts through the signal transduction pathways mediated primarily by estrogen receptors. This study examined the effects of fulvestrant (Ful), a well-known antagonist for the estrogen receptor, on the action of $17{\beta}$-estradiol (E2) with respect to the proliferation and apoptosis of Chinese hamster ovarian (CHO) cells. We used different concentrations of E2, Ful, and E2 plus Ful during different treatment durations. Treatment with 15-40 ${\mu}M$ E2 significantly inhibited proliferation in a time-dependent manner, although it had no influence in concentrations up to 1 ${\mu}M$. Interestingly, Ful at 10-40 ${\mu}M$ also inhibited cellular proliferation in both a concentration- and time-dependent manner. In addition, Ful enhanced rather than decreased the inhibitory effect on cellular proliferation by E2 in combined treatment for 10 days. Thus, Ful does not appear to have an antagonistic effect on estrogen's anti-proliferative action in CHO cells. In TUNEL assays to confirm DNA fragmentation by E2 and/or Ful, CHO cells treated with 20 ${\mu}M$ E2 showed a TUNEL-positive reaction in most DAPI-stained nuclei, and cells treated with either 40 ${\mu}M$ Ful or 40 ${\mu}M$ Ful plus 20 ${\mu}M$ E2 also exhibited a TUNEL-positive reaction but at a lower rate compared to the E2-treated cells. These results indicate that Ful does not have an antagonistic effect on estrogen's anti-proliferative action in CHO cells, suggesting that the anti-proliferative and apoptosis-related mechanism(s) through DNA fragmentation by E2 and Ful may be mediated by different signal transduction pathways.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.2
• /
• pp.11-20
• /
• 2005

This study has a purpose on contributing to apprehend safe and right way to stop to the inline skate beginners and to the instructors who teaches line skating on the basis for the result of the kinematical analysis on Heel brake stop movement of the inline skate, focusing on the displacement on COG, angle displacement of ankle joint, angle displacement of knee joint, angle displacement of hip joint, using a 3D image method by DLT. To achieve this goal, we analysed the kinematical factor of the 3 well-trained inline skating instructors and obtained the following results. 1. During the movement of heel-brake stop, when strong power was given to a stable and balanced stop and the lower limbs, if the physical centroid is lowered the stability increases, and if it is placed high from the base surface, as the stability decreases compared to the case of low physical centroid, we should make a stop by placing a physical centroid in the base surface and lowering the hight of physical centroid. 2. To make a stable and balanced stop and to provide a strong power to the lower limbs, it is advisable to make a stop by decreasing an angle displacement of ankle joint during a "down" movement. In case of the left ankle joint, in all events and phases the dorsiflexion angle showed a decrease. Nevertheless, in the case of the right ankle joint, the dorsiflexion angle shows an increase after a slight decrease. The dorsiflexion angle displacement of ankle joint can be diminished because of the brake pad of the rear axis frame of the right side inline skate by raising a toe, but cannot be more decreased if certain degree of an angle is made by a brake pad touching a ground surface. To provide a power to a brake pad, it is recommended to place a power by lowering a posture making the dorsiflexion angle of the left ankle joint relatively smaller than that of the right ankle. 3. To make a stable and balanced stop and to add a power to a brake pad, the power must be given to the lower limbs in lowering the hight of physical centroid. For this, it is recommended to make a down movement by decreasing the flexion angle of a knee joint and it is necessary to make a down movement by a regular decrease of the angle displacement of knee joint rather than a swift down movement in every event and phase. 4. The right angle displacement of hip joint is made by lowering vertically the hight of physical centroid as leaning slightly forward. If too narrow angle displacement of hip joint is made by leaning forward too much, the balance is lost during the stop by placing the center in front. To make a stable and balance stop and to place a strong power to the lower limbs, it is recommendable to make a narrow angle by lower the hip joint angle. However, excessive leaning of the upper body to make the angle too narrow, can cause an instable stop and loss of physical centroid. After this study, it is considered to assist the kinematical understanding during the heel brake stop movement of the inline skate, and, to present basic data in learning a method of stable and balanced stop for the inline skating beginners or for the inline skate instructors in the present situation of the complete absence of the study in inline skating.