• 전기전자학회논문지
• /
• 제14권3호
• /
• pp.244-249
• /
• 2010

수중의 미립자 계수를 위한 Line-CCD를 이용한 수중광학 시스템을 구현하였다. 미립자 계수 측정을 위하여 680nm Laser diode를 광원으로 사용하였다. 광학시스템을 동작확인을 위해 수중 인공탱크 및 해양에서 실험을 하였다. 시스템의 상 하강 운동 시, 마이크로프로세서(FPGA)의 신호 전달(센서의 신호검출)을 통하여 미립자 계수를 알 수 있다. 시스템의 알고리즘은 또한, 깊이에 따른 압력, 온도, 계수 값을 실시간으로 분석한다. 실험을-통해 광학센서 시스템의 높은 정확도를 보여주었다. 따라서, Line-CCD를 통한 실시간 측정 가능한 수중광학 시스템을 제안 하였다.

• 대한공간정보학회지
• /
• 제15권4호
• /
• pp.81-88
• /
• 2007

선형 CCD 센서에 의해 획득되는 위성영상의 기하는 프레임 카메라 영상의 기하와는 차이점을 가지고 있다. 이는 각 스캔 선마다 영상의 외부표정요소가 다르기 때문에 발생한다. 따라서 기존의 프레임 영상에 사용되었던 에피폴라 기하와는 다른 기하가 필요하게 된다. 이와 같은 관점에서, 본 연구에서는 대표적인 선형 CCD 센서를 사용하여 촬영된 IKONOS 위성영상을 이용하여 에피폴라 영상을 제작하기 위한 영상 재배열 방법에 대한 연구를 수행하였으며, 영상의 투영조건을 중심투영이 아닌 평행투영으로 간주하여 구성된 2D 부등각 센서모델을 적용하였다. 이센서 모델에 의해 구성된 에피폴라 선식으로부터 유도된 정규 매개변수와 부등각 변환을 적용하여 에피폴라 재배열영상을 제작하였다. 결과로써, 2D 부등각 센서모델의 정확도가 검증되었으며, 제작된 에피폴라 영상을 사용하여 추출된 3차원 위치정확도는 IKONOS의 RFM 위치정확도와 유사하게 도출되었다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.182-185
• /
• 2005

Satellite cameras are calibrated before launch in detail and in general, but it cannot be guaranteed that the geometry is not changing during launch and caused by thermal influence of the sun in the orbit. Modem satellite imaging systems are based on CCD-line sensors. Because of the required high sampling rate the length of used CCD-lines is limited. For reaching a sufficient swath width, some CCD-lines are combined to a longer virtual CCD-line. The images generated by the individual CCD-lines do overlap slightly and so they can be shifted in x- and y-direction in relation to a chosen reference image just based on tie points. For the alignment and difference in scale, control points are required. The resulting virtual image has only negligible errors in areas with very large difference in height caused by the difference in the location of the projection centers. Color images can be related to the joint panchromatic scenes just based on tie points. Pan-sharpened images may show only small color shifts in very mountainous areas and for moving objects. The direct sensor orientation has to be calibrated based on control points. Discrepancies in horizontal shift can only be separated from attitude discrepancies with a good three-dimensional control point distribution. For such a calibration a program based on geometric reconstruction of the sensor orientation is required. The approximations by 3D-affine transformation or direct linear transformation (DL n cannot be used. These methods do have also disadvantages for standard sensor orientation. The image orientation by geometric reconstruction can be improved by self calibration with additional parameters for the analysis and compensation of remaining systematic effects for example caused by a not linear CCD-line. The determined sensor geometry can be used for the generation? of rational polynomial coefficients, describing the sensor geometry by relations of polynomials of the ground coordinates X, Y and Z.

• 제어로봇시스템학회논문지
• /
• 제3권6호
• /
• pp.613-618
• /
• 1997

In this paper, we designed a line CCD camera for a flying image, which is composed of a line CCD sensor(2048 cells) and a rotating mirror, and investigated its optical properties. We also made the 3-D image from the flying image which is made of 2-D image being juxtaposed to 1-D images obtained by the camera, and performed the calibration to acquire high precision 3-D data. As a result, we obtained the 3-D measurement system using the slit type of laser projector is available to measure the high precision shape of objects.

• 한국정보통신학회논문지
• /
• 제12권11호
• /
• pp.2050-2056
• /
• 2008

본 논문은 스테레오 라인 CCD와 광원을 이용한 2차원 평면에서 이동객체를 인식하고 이동경로를 추적하는 시스템 구현이다. 시스템 구현은 카메라 이미지를 직접 처리하는 대신 두개의 라인 CCD 센서와 입력된 라인 이미지의 밝기를 비교하여 2차원 거리를 측정한다. 알고리듬은 이동객체감지, 경로추적과 좌표변환 기법을 적용한다. 객체의 이동경로를 효과적으로 감지하기 위하여 측정된 거리의 신뢰성을 평가하는 알고리즘을 개발하였다. 시스템을 구현하여 실험한 결과 5mm 인식율과 100ms 주기 이상의 이동객체경로 추적이 가능하였다.

• International Journal of Korean Welding Society
• /
• 제2권2호
• /
• pp.57-60
• /
• 2002

Generally, the laser vision sensor makes it possible design a highly reliable and precise range sensor at a low cost. When the laser vision sensor is applied to lap joint welding, however. there are many limitations. Therefore, a specially-designed hardware system has to be used. However, if the multi-lines are used instead of a single line, multi-range data .:an be generated from one image. Even under a set condition of 30fps, the generated 2D range data increases depending on the number of lines used. In this study, a laser vision sensor with a multi-line pattern is developed with conventional CCD camera to carry out high speed seam tracking in lap joint welding.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 추계종합학술대회 B
• /
• pp.157-160
• /
• 2008

A realization for moving object detecting and tracking system in two dimensional plane using stereo line CCDs and lighting source is presented in this paper. Instead of processing camera images directly, two line CCD sensor and input line image is used to measure two dimensional distance by comparing the brightness on line CCDs. The algorithms are used the moving object tracking and coordinate converting method. To ensure the effective detection of moving path, a detection algorithm to evaluate the reliability of each measured distance is developed. The realized system results are that the performance of moving object recognizing shows 5mm resolution and mean error is 1.89%, and enables to track a moving path of object per 100ms period.

• 한국통신학회논문지
• /
• 제12권1호
• /
• pp.9-18
• /
• 1987

DPCM의 선형예측기를 비감광성 원소(dummy pixel)를 가지고 있는 선형 감광성 전하결합소자(CCD)를 광전자 시스템으로 구현하는 방법을 제시하였다. 종래의 시스템과 마찬가지로 이 시스템은 입력광원, 공간여파기(마스크), 선형감광성 CCD의 3부분으로 구성되었다. 비감광성 원소에 의한 시간지연을 고려하여 종래의 마스크를 변형하여 각 예측계수를 하나 이상의 마스크 원소에 분산시킨, 새로운 방식의 분산형 마스크를 제시하고 이 마스크를 사용할 때의 특성을 이론적으로 분석하였으며 실험으로 확인하였다.

• Journal of Welding and Joining
• /
• 제14권1호
• /
• pp.99-106
• /
• 1996

Development of an automatic TIG welding system incorporating a vision sensor and torch control mechanism leads to an improved welding quality and greater production efficiency. The automatic welding system should be greatly restricted in its size and weight for the LNG(Liquefied Natural Gas) storage tank and also provide a unique torch rotating mechanism which keeps the torch tip in the constant position while the angle is changed continuously to maintain the welding torch substantially perpendicular to the weld line. The developed system is driven by two translation axes X, Z and one rotational axis. A moving line window method is adopted to the image recognition of the corrugated membranes with specular reflection. This method decides original laser stripe patterns in image which is affected by multi-reflection. A self-teaching algorithm, which guides the automatic welding machine with the information provided by the CCD camera without any previous learning of a reference trajectory, was developed for tracking the corrugated membrane of the LNG tank along the weld line.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.823-825
• /
• 2003

A sensor system was designed to measure real time vibro displacement of civil structure. The He-Ne laser is used for the displacement measuring method, because it guarantees short time stabilization, long time output power stability. Also, it guarantees simple maintenances and repairs under actual using condition. The line CCD image sensor(Tcd-142d) is used to detect the displacement of Ne-Ne laser responding to the vibro of civil structure. For accurate measurement and comparison, CDP-50 is used. Usually CDF-50 (Strain type displacement device) is used for the standard correction device of optical measurement equipments. The data processing part is consists of Optical sensor part, Wireless data transmission device, DAQp-1200, and LapView program. The displacement data of vibro from optical sensor part inputted to wireless data transmission device and then transmitted to DAQp-1200 in main control room. DAQp-1200 performs A/D conversion for the receiving data. After that the converted data inputted to computer system using LapView program for user display. The significance of this paper is to develope a convenient, accurate and lost saving real time displacement measurement system for the civil structure.