• 한국수소및신에너지학회논문집
• /
• 제17권2호
• /
• pp.158-165
• /
• 2006

In order to provide the database for designing microcombustors, the combustion characteristics of premixed methane and propane air microflames at normal and elevated temperatures and atmospheric pressure generated on a microtube were studied experimentally and computationally. The stability limits of premixed microflames and the propensity of the microflames near the stability limits were experimentally determined, while the structure of the microflame at the fuel-leanest limit was obtained using a two-dimensional CFD simulation with a reduced kinetic mechanism. For all the microflames, the stability limits were observed only in the fuel-rich region. Results also show substantial extension of stability limits with elevated temperature that is realistic condition for micro fuel processing and significant fuel dilution immediately near the tube exit due to a low Peclet number times Lewis number effect.

• 한국산업보건학회지
• /
• 제25권2호
• /
• pp.134-145
• /
• 2015

Objectives: An objective of this study was to perform a risk assessment and social cost-benefit analysis for revising permissible exposure limits for seven substances: Nickel(Insoluble inorganic compounds), benzene, carbon disulfide, formaldehyde, cadmium(as compounds), trichloroethylene, touluene-2,4-diisocyanate. Materials and Methods: The research methods were divided into risk and hazard assessment and cost-benefit analysis. The risk and hazard assessment for the seven substances consists of four steps: An overview of GHS MSDS(1st), review of document of ACGIH's TLVs (2nd), comparison between international occupational exposure limits and domestic permissible exposure limits(3rd), and analysis of excess workplace and excess rate for occupational exposure limits based on previous work environment measurement data(4th). Total cost was estimated using cost of local exhaust ventilation, number of excess workplace and penalties for exceeding a permissible exposure limit. On the other hand, total benefit was calculated using the reduction rate of occupational disease, number of workplaces treating each substance and industrial accident compensation. Finally, the net benefit was calculated by subtracting total cost from total benefit. Results: All the substances investigated in this study were classified by CMR(Carcinogens, Mutagens or Reproductive toxicants) and their international occupational exposure limits were stricter than the domestic permissible exposure limits. As a result of excess rate analysis, trichloroethylene was the highest at 11%, whereas nickel was the lowest at 0.5%. The excess rates of all substances except for trichloroethylene were observed at less than 10%. Among the seven substances, the total cost was highest for trichloroethylene and lowest for carbon disulfide. The benefits for the seven substances were higher than costs estimated based on strengthening current permissible exposure limits. Thus, revising the permissible exposure limits of the seven substances was determined to be acceptable from a social perspective. Conclusions: The final revised permissible exposure limits suggested for the seven substances are as follows: $0.2mg/m^3$ for nickel, 0.5 ppm(TWA) and 2.5 ppm(STEL) for benzene, 1 ppm(TWA) for carbon disulfide, $0.01mg/m^3$(TWA) for cadmium, 10 ppm(TWA) and 25 ppm(STEL) for trichloroethylene, 0.3 ppm(TWA) for formaldehyde, and 0.005 ppm(TWA) and 0.02 ppm(STEL) for toluene diisocynate(isomers).

• 한국산업보건학회지
• /
• 제30권2호
• /
• pp.185-195
• /
• 2020

Objectives: The purpose of this study was to analyze noise exposure levels and the rate of exceedance of exposure limits in workplaces from a 2015 measurement of working environments according to area, industry, and scale of workplace and to determine changes compared to the past. Methods: Among the 408,875 measurements of noise in working environments from 27,030 workplaces in 2015, 16,359 workplaces that were linked to special health examination data were selected as the subjects of this study. The eight-hour corrected measurements and geometric mean values of the individual noise measurements of the workplaces were used to calculate noise exposure levels and the exceedance rate of exposure limits. Results: The average noise exposure level of the overall workplaces making up the subjects of this study was 83.6 dBA, and the exceedance rate of exposure limits was 15.1%. At least half of the noise measurements exceeded the exposure limits in 13.7% of the workplaces. Noise exposure levels were higher in the manufacturing industry and in smaller-scale workplaces. The exceedance rate of noise exposure limits was higher in the mining and manufacturing industries and in smaller-scale workplaces. Conclusions: Noise exposure has shown improvements compared to the past, but the exceedance rate of exposure limits was still high, and more than half of the workers were being exposed to noise of 85 dBA or higher. Therefore, it is necessary to make more active improvements in working environments in terms of noise exposure.

• 대한임상전기생리학회지
• /
• 제10권1호
• /
• pp.1-5
• /
• 2012

Purpose : In this study, stroke patients' limits of stability and functional reach test and tibialis anterior, gastrocnemius muscle of lower extremity muscle activities to evaluate the correlation. Methods : 30 adult stroke patients to participate in this study. Limits of stability were measured using biorescue, tibialis anterior and gastrocnemius muscle of muscles activities were measured with functional reach test when there was movement. Results : Limits of stability and functional reach test (r=0.753, p<0.01), RMS value of the limits of stability and tibialis anterior muscle (r=0.706, p<0.01), RMS value of the limits of stability and gastrocnemius muscle (r=0.766, p<0.01), RMS value of the functional reach test and tibialis anterior muscle (r=0.835, p<0.01), RMS value of the functional reach test and gastrocnemius muscle (r=0.663, p<0.01), RMS value of the tibialis anterior and gastrocnemius muscle (r=0.816, p<0.01) correlations are shown as statistically significant. Conclusion : The balance and lower extremity muscle activities of stroke patients were studied, and were positively correlated with the RMS value of the limits of stability and functional reach test, tibialis anterior muscle, and gastrocnemius muscle. This study has shown that stroke patients' ankle joint muscle activity can greatly.

• 한국안전학회지
• /
• 제32권2호
• /
• pp.132-146
• /
• 2017

Appropriate speed limits at a reasonable level in urban roads are highly important factors for efficient and safe movement. Thus, it is greatly necessary to develop the objective models or methodology based on engineering study considering factors such as traffic accident rates, roadside development levels, and roadway geometry characteristics etc. The purpose of this study is to develop the estimate model of appropriate speed limits at each road sections in urban roads using traffic information big data and field specific data and to review the effects of accident decrease. In this study, the estimate method of appropriate speed limits in directional two or more lanes of urban roads is reflecting features of actual variables in a form of adjustment factor on the basis of the maximum statutory speed limits. As a result of investigating and testing influential variables, the main variables to affect the operating speed are the function of road, the existence of median, the width of lane, the number of traffic entrance/exit path and the number of traffic signal or nonsignal at intersection and crosswalk. As a result of testing this model, when the differences are bigger between the real operating speed and the recommended speed limits using model developed in this study, the accident rate generally turns out to be higher. In case of using the model proposed in this study, it means accident rate can be lower. When the result of this study is applied, the speed limits of directional two or more lane roads in Seoul appears about 11km/h lower than the current speed limits. The decrease of average operating speed caused by the decrease of speed limits is 2.8km/h, and the decrease effect of whole accidents according to the decrease of speed is 18% at research road. In case that accident severity is considered, the accident decrease effects are expected to 17~24% in fatalities, 11~17% in seriously injured road user, 6~9% in slightly injured road user, 5~6% in property damage only accidents.

• 항공우주정책ㆍ법학회지
• /
• 제6권
• /
• pp.137-147
• /
• 1994

Clearly there are many legal arguments and criticisms surrounding the proposals for change in the Warsaw Convention and the need for a radical review. The question remains is unlimited liability the answer or should there be some other form of supplemental compensation and if so, what limits should be applicable. It does seem that the adopted limits of the Convention are seen by many as the first line of defence, which, dependent on political and cultural differences, the legal interpretation of contractual wording and the legal system globally have resulted in enormous differences in compensation paid whether or not the Convention limits were imposed. An example of this is in the United States, which highlights the significance of the problem in that domestic travellers without Convention Limits can, through the American legal system, obtain compensation in the multi-million dollar area for a death claim, whereas a passenger t1ying internationally would in the first instance be subject to Convention Limits. expensive legal action through litigation. To date, we can advise that insurers have not charged additional premium for unlimited liability coverage. Insurance rates as we have stated are hardening considerably. To date, average rate increases have been plus 56% for aircraft hull and plus 45% for liabilities. Insurers last year suffered global losses of around US $ 1.1 Billion against a premium income of US $ 800,000. The target premium income for 1993 is believed to be in the region of US $1.4 Billion.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.578-582
• /
• 2005

In this study, the conceptual foundation and development process of the Antecedent soil Moisture Condition(AMC) in SCS runoff curve number method are reviewed. Although the runoff volume is very sensitive with AMC condition, the AMC class limits developed in SCS(1972) are used in rainfall-runoff analysis without careful consideration. Tn this study, following the SCS curve number development process, rainfall-runoff characteristics of the Jang-Pyung subbasin subject to the Pyung-Chang River basin are analyzed to evaluate the reasonability of the AMC class limits at present. The New AMC class limits are proposed by the sensitive analysis of the antecedent rainfall - curve number value. As a result, the classification value of AMC-I with II is 22mm of antecedent 5-day rainfall amount, and the classification of AMC-II with III is 117mm in growing season. When the New AMC class limits are applied to Jang-Pyung subbasin, AMC probability distribution shows that the AMC-II has increased remarkably even though the AMC-I has a little higher value. But the AMC-III has the smallest one. According to the conceptual basis of the curve number method, the AMC probability distribution, the New AMC class limits adopted, gives reasonable results.

• 대한수학회보
• /
• 제48권5호
• /
• pp.1063-1078
• /
• 2011

Let M = {1, 2, ${\ldots}$, n} and let V = {$I{\subseteq}M:1{\in}I$}. Denote M\I by $I^c$ for $I{\in}V$. The goal of this paper is to investigate the solution and the stability using the alternative fixed point of generalized cubic functional equation $ \sum\limits_{I{\in}V}f(\sum\limits_{i{\in}I}a_ix_i-\sum\limits_{i{\in}I^c}a_ix_i)=2{^{n-2}{a_1}}\sum\limits_{i=2}^na_i^2[f(x_1+x_i)+f(x_1-x_i)]+2{^{n-1}{a_1}(a^2_1-\sum\limits_{i=2}^2a^2_i)f(x_1)$ in ${\beta}$-Banach modules on Banach algebras, where $a_1,{\ldots},a_n{\in}\mathbb{Z}{\backslash}\{0\}$ with $a_1{\neq}={\pm}1$ and $a_n=1$.

• 한국추진공학회지
• /
• 제3권1호
• /
• pp.86-94
• /
• 1999

충격파가 초음속 수소-공기 제트화염의 화염 안정한계에 미치는 영향을 충격파의 강도와 위치를 변화시키면서 연구하였다. 이러한 목적으로 마하수 2.5의 초음속 연소기 벽면에 쐐기를 부착시켜 경사 충격파를 발생시켰다. 본 실험은 충격파가 초음속 화염에 미치는 영향을 연구한 최초의 실험연구이다. 쉬릴렌 가시화 사진과 벽면 정압, 화염 안정 한계를 측정하였으며 충격파가 없는 경우와 비교하였다. 보염 재순환 영역에 충격파를 적절히 간섭시킴으로써 화염 안정 한계가 대폭 개선되었다. 화염 안정한계가 대폭 향상된 이유는 충격파에 의해 발생한 역압력구배로 화염안정화에 중요한 아음속 재순환 영역의 크기가 증대된 때문으로 여겨진다.

• Advances in concrete construction
• /
• 제8권4호
• /
• pp.295-304
• /
• 2019

The lateral displacement or drift may be the cause of the damage in the reinforced concrete (RC) columns under the seismic load. In many regulations, lateral displacement was limited according to the properties of columns. The design displacement limits may be represented indirectly through the material strain limits and the mechanical properties of columns. EUROCODE-8 and FEMA356 calculate displacement limits by taking into account the mechanical properties of columns. However, Turkey Building Earthquake Code (TBEC) determine displacement limits by taking into account the material strain limits. The aim of this study is to assess the seismic design codes for RC columns through an experimental study. The estimates of seismic design codes have been compared with the experimental results. It is observed that the lateral displacement capacities of columns estimated according to some seismic codes are not in agreement with the experimental results. Also, it is observed that TBEC is conservative in the context of the performance indicator of RC columns, compared to EUROCODE-8 and FEMA356. Moreover, in this study, plastic hinge length and effective stiffness of test elements were investigated.