• Journal of Korean Society of Water and Wastewater
• /
• 제18권2호
• /
• pp.155-164
• /
• 2004

Many countries, including Korea, suffer from a shortage of freshwater. With increases in population and the quality of life, along with large-scale expansion in industrial and agricultural activities, more freshwater is needed. Available resources, Including ground water, are limited, and desalination presents the opportunity for a new unlimited source of freshwater from the sea. The objectives of this study were to test membrane performance in seawater desalination and to examine the quality of water produced. bath well and sea water were used as water sources. Typically used membrane for seawater desalination and high rejection seawater desalination membrane are maintained at almost same recovery rate and permeate flux, while the conductivity was lower in the operation of typically used seawater membrane. The treated water quality using two types of membranes is satisfied with the Korea drinking water quality standards.

• Korean Chemical Engineering Research
• /
• 제53권5호
• /
• pp.540-544
• /
• 2015

A bath for electrodeposition of platinum nanoparitcles on low-cost graphite substrates was developed to attach nanoparticles directly onto a substrate, and electrochemical characteristics of the electrodeposition of platinum nanoparticles were investigated. The reaction mechanism was examined by the analysis of polarization behavior. Cyclic voltammetry measurements revealed that the elecrodeposition of platinum nanoparticles was limited by mass transfer. The chronoamperometric study showed an instantaneous nucleation mechanism during the electrodeposition of platinum nanoparticles on graphite. Because graphite is much cheaper than other carbon-based substrates, the electrodeposition of platinum nanoparticles on the graphite is expected to have useful applications.

• Journal of the Korean Society of Clothing and Textiles
• /
• 제31권9_10
• /
• pp.1465-1474
• /
• 2007

We analyzed the effects of regular Jjimjilbang(Korean sauna) exposure on the heat tolerance in young and old females. Subjects were young(n=7) and old(n=7) females who never had a bath in Jjimjilbang for last year. Jjimjilbang training group took a bath in Jjimjilbang once a week 19 times. Jjimjibang expsure was limited three times per day, Jjimjil were taken free way. To prove the effects of the heat tolerance, Subjects were exposed to hot and humid air$(40.0{\pm}0.5^{\circ}C,\;60{\pm}5%RH)$. In the condition, subjects were taken a foot bathing$(40.0{\pm}0.5^{\circ}C)$ and simulated for 30 min., and rectal temperature, skin temperatures, clothing microclimate, blood pressure, total body weight loss, local sweat and subjective sensation were measured. The results are as follow: Rectal temperature, skin temperatures, clothing microclimate, total body weight and subjective thermal comfort sensation were decreased gradually(p<.001). Local sweat of upper arm was decreased(p<.01). In conclusion. the regular Jjimjilbang exposure has positive effects upon improvement in regulation of body temperature, especially in heat tolerance.

• International Journal of Fluid Machinery and Systems
• /
• 제8권1호
• /
• pp.46-54
• /
• 2015

Thrust-ring-pump is a kind of extreme-low specific speed centrifugal pump with special structure as numerous restrictions from thrust bearing and operation conditions of hydro-generator units. Because the oil circulatory and cooling system with thrust-ring-pump has a lot of advantages in maintenance and compactness in structure, it has widely been used in large and medium-sized hydro-generator units. Since the diameter and the speed of the thrust ring is limited by the generator set, the matching relationship between the flow passage inside the thrust ring (equivalent to impeller) and oil bath (equivalent to volute) has great influence on hydrodynamic performance of thrust-ring-pump. On another hand, the head and flow rate are varying with the operation conditions of hydro-generator units and the oil circulatory and cooling system. As so far, the empirical calculation method is employed during the actual engineering design, in order to guarantee the operating performance of the oil circulatory and cooling system with thrust-ring-pump at different conditions, a collaborative hydrodynamic design and optimization is purposed in this paper. Firstly, the head and flow rate at different conditions are decided by 1D flow numerical simulation of the oil circulatory and cooling system. Secondly, the flow passages of thrust-ring-pump are empirically designed under the restrictions of diameter and the speed of the thrust ring according to the head and flow rate from the simulation. Thirdly, the flow passage geometry matching optimization between thrust ring and oil bath is implemented by means of 3D flow simulation and performance prediction. Then, the pumps and the oil circulatory and cooling system are collaborative hydrodynamic optimized with predicted head-flow rate curve and the efficiency-flow rate curve of thrust-ring-pump. The presented methodology has been adopted by DFEM in design process of thrust-ring-pump and it shown can effectively improve the performance of whole system.

• Korean Journal of Environment and Ecology
• /
• 제26권3호
• /
• pp.463-471
• /
• 2012

Objective of this study is to provide basic information for developing more differentiated and targeted forest healing policy and Korean medical healing programs grounded on consumer preference for forest based Korean medical healing tourism products. The internet survey(CAWI) by percentage quota sampling with 400 Seoulite ages over 30 by the age, area, and gender was conducted, and 317 samples were used for a final analysis. 61.5% of the Seoulite associated 'forest bath/walking in the woods/tree' with an image of a forest based Korean medical healing tourism product, and preference for the product and the intention to use were positive at the percentages of 72.9% and 67.5%, respectively. Preferred areas were Seoul/Gyeonggi-do(53.5%) and Gangwon-do(38.8%). 'Stress solving and refreshment', 'taking a forest bath and a walk', and 'maintaining and promoting health' were the main purposes of the use. As for a therapy, 'walking therapy' was most preferred, and 'ergotherapy' was the next. First priority as for a use facility was 'healing trail', and 'professional medical facility' ranked second. Although important decision attributes were ' cost of use', 'food', and 'friendliness of medical staff', all the other sets of attributes related to use convenience, quality of medical service and tourism activities also recorded high, which forecasts higher consumer expectation for the product. As the result showing differences in consumer preference by the demographic segmentation, differentiated and segmented consumer needs should be considered when planing and managing a product. The scope of the study is limited to a demographic segmentation which is a basic stage of understanding consumer preference, therefore more detailed future researches on complicated and multi-dimensional consumer needs are required.

• Journal of the Korean institute of surface engineering
• /
• 제37권3호
• /
• pp.179-184
• /
• 2004

Hard chromium coating technology using hexavalent chromium bath is widely used in various industries. Because of the serious health and environmental problems of hexavalent chromium, many attempts to alternate the hexavalent chromium plating have been made over 50 years. Trivalent chromium plating is one of the challengeable technologies to alternate hexavalent chromium plating. It is relatively none-toxic. Although some papers have described hard chromium coatings produced from trivalent chromium solution, it has limited the industrialization because of chemical and electrochemical problems of trivalent chromium ions. This paper introduces a number of factors for successful trivalent chromium plating, to give a some information about trivalent chromium process.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.350-355
• /
• 2009

The crysralline silicon solar cell where the solar cell market grows rapidly is occupying of about 85% or more high efficiency and low cost endeavors many crystalline solar cells. The fabricaion process of high efficiency crystalline silicon solar cells necessitate complicated fabrication processes and Ti/Pd/AG contact, This metal contacts have only been used in limited areas in spite of their good srability and low contact resistance because of expensive materials and process. Commercial solar cells with screen-printed solar cells formed by using Ag paste suffer from loe fill factor and high contact resistance and low aspect ratio. Ni and Cu metal contacts have been formed by using electroless plating and light-induced electro plating techniques to replace the Ti/Pd/Ag and screen-printed Ag contacts. Copper and Silver can be plated by electro & light-induced plating method. Light-induced plating makes use the photovoltaic effect of solar cell to deposit the metal on the front contact. The cell is immersed into the electrolytic plating bath and irradiated at the front side by light source, which leads to a current density in the front side grid. Electroless plated Ni/ Electro&light-induced plated Cu/ Light-induced plated Ag contact solar cells result in an energy conversion efficiency of 16.446 % on 0.2~0.6${\Omega}$ cm, $20{\times}20mm^2$, CZ(Czochralski) wafer.

• Journal of the Korean Home Economics Association
• /
• 제46권1호
• /
• pp.39-45
• /
• 2008

We analyzed the effects of regular Jjimjilbang(Korean sauna) exposure on the physiological responses in seven elderly farmers(Male=3, Female=4). Jjimjil training group took a bath in Jjimjilbang 8 times twice a week. Jjimjibang exposure was limited three times per day. Rectal temperature, total sweat rate, body fat (%), blood pressure, pulse, $Na^+$ concentration in sweat, and subjective sensation were measured during Jjimjil training exposure. The results are as follow: During Jjimjil exposure, changes of rectal temperature in male farmers were more stabilized than female farmers. The gradual decrease in total sweat rate and Na+ concentration in sweat was observed in both sexes. After Jjimjil exposure, the decrease in blood pressure was observed in both sexes, but not observed changes according to regular Jjimjil exposure. Subjective thermal comfort sensation was changed positively. In conclusion, the regular Jjimjil exposure has positive effects upon improvement in regulation of body temperature, blood pressure, and $Na^+$ concentration especially in heat tolerance.

• The Journal of Internal Korean Medicine
• /
• 제44권4호
• /
• pp.726-740
• /
• 2023

Objectives: This review investigated the research on warm herbal foot bath therapy (WHFT) for insomnia. Methods: A search was conducted on the China National Knowledge Infrastructure (CNKI) database to collect relevant studies published up to August 29, 2023. Randomized controlled trials (RCTs) comparing WHFT and sleeping pills in patients with insomnia were included. The methodological quality of the included studies was assessed using the Cochrane risk-of-bias assessment tool. The results of the meta-analysis were presented as risk ratios (RRs) or mean differences (MDs) and their 95% confidence intervals (CIs). Results: A total of 11 RCTs were included. WHFT as monotherapy resulted in a significantly higher total effective rate (TER) (RR, 1.25; 95% CI, 1.15 to 1.36; I²=25%) and an improved Pittsburgh Sleep Quality Index (PSQI) global sore (MD, -3.10; 95% CI, -4.24 to -1.95; I²=73%) compared to benzodiazepines. Additionally, WHFT as a combined therapy with benzodiazepines resulted in a significantly higher TER (RR, 1.15; 95% CI, 1.04 to 1.27; I²=0%) and an improved PSQI global score (MD, -2.23; 95% CI, -4.09 to -0.38; I²=80%) compared to benzodiazepines alone. In network analysis visualizing the components of HWFT, four clusters were discovered, and Polygoni Multiflori Ramuls and Ziziphi Spinosae Semen were the key herbs used in WHFT. Overall, the methodological quality of the included studies was poor. Conclusions: There was limited evidence that WHFT as a monotherapy or combined therapy was effective in improving insomnia. The findings can be used as basic data for future WHFT research in South Korea.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.106.1-106.1
• /
• 2011

The Cu(In,Ga)Se2 (CIGS) thin film solar cells have been achieved until almost 20% efficiency by NREL. These solar cells include chemically deposited CdS as buffer layer between CIGS absorber layer and ZnO window layer. Although CIGS solar cells with CdS buffer layer show excellent performance, the short wavelength response of CIGS solar cell is limited by narrow CdS band gap of about 2.42 eV. Taking into consideration the environmental aspect, the toxic Cd element should be replaced by a different material. Among Cd-free candidate materials, the CIGS thin film solar cells with ZnS buffer layer seem to be promising with 17.2%(module by showa shell K.K.), 18.6%(small area by NREL). However, ZnS/CIGS solar cells still show lower performance than CdS/CIGS solar cells. There are several reported reasons to reduce the efficiency of ZnS/CIGS solar cells. Nakada reported ZnS thin film had many defects such as stacking faults, pin-holes, so that crytallinity of ZnS thin film is poor, compared to CdS thin film. Additionally, it was known that the hetero-interface between ZnS and CIGS layer made unfavorable band alignment. The unfavorable band alignment hinders electron transport at the heteo-interface. In this study, we focused on growing defect-free ZnS thin film and for favorable band alignment of ZnS/CIGS, bandgap of ZnS and CIGS, valece band structure of ZnS/CIGS were modified. Finally, we verified the photovoltaic properties of ZnS/CIGS solar cells.