• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1A
• /
• pp.67-74
• /
• 2006

The use of steel plates has been greatly increased in bridge construction, particularly for long-span bridges. For connections of those steel plates in the field, application of high-tension bold, such as M30, is highly demanded. However, the current steel construction specifications in Korea do not provide information for large-sized bolt connections. In order to evaluate the applicability of the large-sized high-tension bolt, this study experimentally investigates relaxation and slip behavior of M30 bolts with varying bolt size and plate thickness. In addition, internal compressive stress was computed using FEM analysis. The analyzed results were compared with the stress distribution measured from strain gages attached on bolts and bolt holes. From the study presented herein, the M30 high-tension bolts are anticipated to be successfully used with the relaxation less than 10% and the slip coefficient satisfying the specified limit.

• International Journal of Computer Science & Network Security
• /
• v.24 no.1
• /
• pp.226-234
• /
• 2024

The frequent handover problem and playing ping-pong effects in 5G (5th Generation) ultra-dense networking cannot be effectively resolved by the conventional handover decision methods, which rely on the handover thresholds and measurement reports. For instance, millimetre-wave LANs, broadband remote association techniques, and 5G/6G organizations are instances of group of people yet to come frameworks that request greater security, lower idleness, and dependable principles and correspondence limit. One of the critical parts of 5G and 6G innovation is believed to be successful blockage the board. With further developed help quality, it empowers administrator to run many systems administration recreations on a solitary association. To guarantee load adjusting, forestall network cut disappointment, and give substitute cuts in case of blockage or cut frustration, a modern pursuing choices framework to deal with showing up network information is require. Our goal is to balance the strain on BSs while optimizing the value of the information that is transferred from satellites to BSs. Nevertheless, due to their irregular flight characteristic, some satellites frequently cannot establish a connection with Base Stations (BSs), which further complicates the joint satellite-BS connection and channel allocation. SF redistribution techniques based on Deep Reinforcement Learning (DRL) have been devised, taking into account the randomness of the data received by the terminal. In order to predict the best capacity improvements in the wireless instruments of 5G and 6G IoT networks, a hybrid algorithm for deep learning is being used in this study. To control the level of congestion within a 5G/6G network, the suggested approach is put into effect to a training set. With 0.933 accuracy and 0.067 miss rate, the suggested method produced encouraging results.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.2
• /
• pp.115-130
• /
• 2013

In this study, lateral-torsional buckling (LTB) strength of high-strength H-beams built up from 800MPa tensile-strength steel was experimentally and analytically evaluated according to current lateral stability provisions (KBC 2009, AISC-LRFD 2010). The motivation was to evaluate whether or not current LTB provisions, which were originally developed for ordinary steel with different stress-strain characteristics, are still applicable to high-strength steel. Two sets of compact-section specimens with relatively low (Set A) or high (Set B) warping stiffness were prepared and tested under uniform moment loading. Laterally unbraced lengths of the test specimens were controlled such that inelastic LTB could be induced. All specimens exhibited LTB strength exceeding the minimum limit required by current provisions by a sufficient margin. Moreover, some specimen in Set A reached a rotation capacity required for plastic design, although its laterally unbraced length belonged to the inelastic LTB range. All the test results indicated that extrapolation of current provisions to high-strength steel is conservative. In order to further analyze the test results, the relationship between inelastic moment and laterally unbraced length was also derived in explicit form for both ordinary- and high-strength steel based on the effective tangent modulus of inelastic section. The analytical relationship derived again showed that extrapolation of current laterally unbraced length limit leads to a conservative design in the case of high-strength steel and that the laterally unbraced length to control the inelastic LTB behavior of high-strength steel beam should be specified by including its unique post-yield strain-hardening characteristics.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.6
• /
• pp.718-724
• /
• 1999

This study was investigated the changes of the properties of matter such as the gel formation of the combined fish based on the mixed rate between the ocean jumbo squid and Alaska pollock surimi, and compared the relationships between the gel formation and water holding capacity. The changes of the gel formation based on 20 min fish grinding time and $2.5\%$ salt concentration according to the mixed rate was thought as the optimal addition limit. There was no significant function of gel product more than $20\%$ Jumbo squid meat. The more squid meat in the mixed meat could make the lower breaking stress but 7:3 rate of pollock : squid could retain breaking strain. The effect of the moisture content on mixed fish meat was studied and the drastic decrease of the gel formation and water holding capacity was indicated in $78\%$.

• Journal of the Korea Concrete Institute
• /
• v.24 no.6
• /
• pp.727-735
• /
• 2012

Recently, a high-strength strand of 2400 MPa was developed using domestic technologies. In 2011, KS D 7002 was revised to cover the newly developed high-strength strands to support their practical usage. Presently, however, discussions and evaluations are not sufficient on the mechanical properties of the strands and their performance in structural members. Also, there were no detailed reviews on the need to revise the current design code for practical use of the high-strength strands. In this study, flexural behavior of a member with the high-strength strands was estimated through sectional analysis and a review and comparison of the domestic and foreign design codes were conducted considering the analysis results. Also, the need for the revision of the design code was discussed. Such discussion especially focused on the estimation of the stress in strand, which related with various issues such as determination methods for yield point of strands, time-dependent loss of prestressing force, estimation of stress in strand at member failure, and net strain limit for ductile failure of member. The discussion revealed that some parts in the design code need a revision and the further studies are required.

• Tuberculosis and Respiratory Diseases
• /
• v.72 no.3
• /
• pp.293-301
• /
• 2012

Background: Ventilator-associated pneumonia (VAP) requires prompt and appropriate treatment. Since methicillin-resistant Staphylococcus aureus (MRSA) is a frequent pathogen in VAP, rapid identification of it, is pivotal. Our aim was to evaluate the utility of quantitative polymerase chain reaction (qPCR) as a useful method for etiologic diagnoses of MRSA pneumonia. Methods: We performed qPCR for mecA, S. aureus-specific femA-SA, and S. epidermidis-specific femA-SE genes from bronchoalveolar lavage or bronchial washing samples obtained from clinically-suspected VAP. Molecular identification of MRSA was based on the presence of the mecA and femA-SA gene, with the absence of the femA-SE gene. To compensate for the experimental and clinical conditions, we spiked an internal control in the course of DNA extraction. We estimated number of colony-forming units per mL (CFU/mL) of MRSA samples through a standard curve of a serially-diluted reference MRSA strain. We compared the threshold cycle (Ct) value with the microbiologic results of MRSA. Results: We obtained the mecA gene standard curve, which showed the detection limit of the mecA gene to be 100 fg, which corresponds to a copy number of 30. We chose cut-off Ct values of 27.94 (equivalent to $1{\times}10^4$ CFU/mL) and 21.78 (equivalent to $1{\times}10^5$ CFU/mL). The sensitivity and specificity of our assay were 88.9% and 88.9% respectively, when compared with quantitative cultures. Conclusion: Our results were valuable for diagnosing and identifying pathogens involved in VAP. We believe our modified qPCR is an appropriate tool for the rapid diagnosis of clinical pathogens regarding patients in the intensive care unit.

• Asia pacific journal of information systems
• /
• v.17 no.4
• /
• pp.97-112
• /
• 2007

Most traditional newspaper publishers provide online editions to counter the competition of online news providers. However, the relationship between the online and print editions of the same newspaper has not been clearly defined. Some see the online newspaper as a substitute, while others consider it a complement. A 2002 NAA online newspaper consumer survey indicated that one-third of its respondents said they were now using the print newspaper less. Others have argued that the online edition will not wipe out print consumption, and may even complement it. While the print edition offers particular advantages such as portability, less eye strain, and the tactile experience of a printed page, the online edition also offers specific advantages such as access to breaking news, continually updated information, access to old archives, etc. All these factors would tend to lower the degree of interchangeability between the products. However, recent empirical studies show that the online edition is a substitute for rather than a complement of the print edition. Still, to some print readers, the online edition provides additional value. In this paper, by capturing the two different aspects of online editions the substitute aspect and the additional value added aspect as well as other available online alternatives, we develop an analytical model to derive the optimal production and distribution strategies of both online and print editions. Confronting the "free versus fee" issue, we show that it is optimal to provide an online version of the print newspaper for free to non-print subscribers. However, the amount of free news content that the publishers need to put on the Web depends on the available alternatives on the online market. The "fee" and "free" options both have merits and demerits as well. If the publisher charges for the online version of the print newspaper, she can generate revenue from the fee charged to online readers. However, doing so will limit the size of the online audience and further reduce online advertising revenue. At the same time, by providing a high-quality online version and charging for it, the price of the print newspaper must stay low in order to lure high valued readers. On the contrary, if the publisher provides an online version of the print newspaper for free, she can obtain a larger audience for the online version. At the same time, by providing a low-quality online newspaper, the publisher can increase the print newspaper price to get more revenue from high valued offline readers, although no revenue is incoming from online version readers. Through systematic measuring of all the pros and cons, our analysis shows that the optimal option is not "fee" but "free."

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.3
• /
• pp.1-17
• /
• 1999

The purpose of this study is to evaluate the creation techniques of artificial wetland, one of biotopes developed to promote biodiversity in urban areas, and to look for improvement steps. Specifically, artificial wetland creation techniques were categorized into living environment and living creature classification. Being living conditions for creations, habitat environment was reviewed with a focus on water and soil environments. Living creatures were classified into plants, insects, fish, and birds. The evaluation of creation techniques was done in post-construction evaluation while considering the creation of habitats for living creatures. Intervention by users, changes in living environment and living species, and relevance of creation techniques were reviewed. Key results of this study are as follows. (1) Water environment for the living environment of creatures provides a suitable environment conditions for the living of creatures through a process easing the use of piped water. Various water depths and embankment appear to have a positive impact on the living of aquatic life. In particular, embankment covered in soil naturally played an important role as a place for the activities of aquatic insects and young fish as well as the growth of aquatic plants. (2) Various aquatic and ground plants to promote insect-diversity, shallow water, and old-tree logs had contributed greatly in increasing the types and number of insects. Aquatic insects. Aquatic insects were seen much particularly in areas where aquatic plants are rich but water is shallow than any other areas. (3) A space piled with stone to provide habitats for fish was not much used. However, it was observed that fish used embankment built with natural stones and embankment using logs in areas where water is deep. In addition, it was confirmed that 1,500 fish that had been released propagated using various depths and places for birth. (4) It was analyzed that techniques (creation of island, log setting, and creation of man-made bird nests) to provide habitats and to attract birds are not serving their roles. In such a case, it is believed that species had not increased due to the smallness as well as isolated features of the area. Based on theoretical review, they are judged to be areas that are likely to be used when a greater variety of birds is introduced. It is judged that attracting and keeping more birds at the site, such spaces need to be linked systematically in the future in terms of building eco-network while ensuring an adequate living areas. (5) In the study areas, users intervened greatly. As a result, a blockage was created preventing the normal growth of plants and non-indigenous plants were introduced. In order to limit the intervention by users, setting enough buffer zones, and environment education programs were urgently required. D/H=1>Hyangkyo> houses on the river>temples>lecture halls. D/H ratio of the backside areas is as follows. D/H=1>Hyangkyo>houses on the river>lecture halls. 4. Inner garden were planted deciduous than evergreen trees with Lagerstroemia indica. Enclosed dominant trees were planted by Pinus densiflora, Querces seuata. construct GEM strain, and examined for the expression and functional stability in microcosms.

• Korean Journal of Agricultural Science
• /
• v.23 no.1
• /
• pp.25-38
• /
• 1996

To investigate the stability problem of irrigation-drainage channel excavation slope on soft ground, analyzed the behavior of the soft ground with excavation slope by the limit equilibrium method and the finite element method, and compared with field tests. The results of this study were summarized as follows; 1. When rapid drawdown the water level, the crack was occurred by the effect of the excess pore water pressure, and the pore water pressure was decreased slowly. 2. As the width of excavation was larger, the crack width was larger. And, excavated depth was deeper, the progressive failure was appeared. 3. When the soft ground excavation was small-scale, the minimum safety factor was more effected by cohesion(1.0, 1.5, 2.0, 2.5, 3.0) than excavated slope inclination(1:l, 1:1.5, 1:2). 4. As excavation was progressed, the settlement occurred on the top-slope due to plastic domain, and heaving was occurred at the bottom of excavation. 5. The maximum shear stress was appeared greatly as the base part of slope went down. Because of the increase of the maximum shear stress, tension area occurred and local failure possibility was increased. 6. As the excavation depth was increased, the maximum shear strain was appeared greatly at the base of slope and distribution pattern was concentrated beneath the middle of slope.

• International Journal of Highway Engineering
• /
• v.6 no.3 s.21
• /
• pp.9-15
• /
• 2004

The cracking resistance of asphalt mixtures is generally evaluated by measuring a single parameter (i.e., Tensile strength, Stiffness). However, the use of a single parameter has been questioned in the evaluation of asphalt mixture cracking performance. The focus of this study was to clearly identify the key properties and characteristics associated with the cracking resistance of asphalt mixtures. Results of fracture, creep, and strength tests at multiple loading rates performed on the modified and unmodified mixtures showed that the mixture cracking resistance was primarily affected by the rate of micro-damage accumulation. This was reflected in the m-value, without affecting the fracture energy limit. It was also observed that the short loading time (elastic) stiffness alone could not differentiate the mixture cracking resistance of the mixtures. It was concluded that the key to characterize the cracking resistance of asphalt mixture is in the evaluation of the combined effects of creep and failure limits. It was also found that a residual dissipated energy parameter measured from Superpave IDT strength test gave the quick and useful way to distinguish the difference of cracking resistance of asphalt mixtures. Failure strain in the longer-term creep test appeared to be a useful parameter for evaluating the combined effects of creep and failure limits of asphalt mixtures.