• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.189-193
• /
• 2005

Thermal effect of finite-rate chemistry on linear combustion stability and film cooling effect are investigated in sample rocket engine. The flow variables required to evaluate stability limits are obtained from CFD data with finite-rate chemistry adopted in three dimensional chamber. Major flow variables are affected appreciably by finite-rate chemistry and thereby, the calculated stability limits are modified. It is found that finite-rate chemistry contributes to stability enhancement in thermal point of view. And film cooling also has the effect of combustion stabilization.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.2
• /
• pp.75-81
• /
• 2006

Thermal effect of finite-rate chemistry on linear combustion stability and film-cooling effect are investigated in sample rocket engines. The flow variables required to evaluate stability limits are obtained from CFD data with finite-rate chemistry adopted in three dimensional chamber. Major flow variables are affected appreciably by finite--rate chemistry and thereby, the calculated stability limits are modified. It is found that finite-rate chemistry contributes to stability enhancement in thermal point of view. And film cooling also has the effect of combustion stabilization.

• The Journal of Engineering Geology
• /
• v.25 no.1
• /
• pp.9-20
• /
• 2015

A strainmeter goes through a period of instability immediately after installation. To determine the stability of strainmeters installed around the Andong fault zone, South Korea, an x-MR control chart analysis and a T² control chart analysis were conducted. The x-MR control chart analysis used an empirically determined 3σ control limit line to identify abnormal data in recently installed strain gauges. In the T² control chart analysis, the control limit line was set at a confidence of 95%. A comparison of the early stage of measurement with the terminal stage of measurement for three months after installation indicates that stabilization depends on the location and direction of each strain gauge in x-MR control chart analysis. In the T² control chart analysis, the number of values exceeding the control limit line decreased as the terminal stage was approached. Based on these results, it is suggested that the 3σ control limit line of an x-MR control chart can be used as a standard for single gauge stability, and that the 95% confidence limit of a T² control chart analysis could be used as the standard for the stability of multi-gauge strainmeters.

• Journal of Mechanical Science and Technology
• /
• v.14 no.1
• /
• pp.39-47
• /
• 2000

Bifurcation intability modes of axially compressed circular cylindrical shell are investigated in the limit of zero thickness (i.e., h (thickness) ${\rightarrow}$ 0) analytically, adopting the general stability theory developed by Triantafyllidis and Kwon (1987) and Kwon (1992). The primary state of the shell is obtained in a closed form using the asymptotic technique, and then the straight-forward bifurcation analysis is followed according to the general stability theory to obtain the bifurcation modes in the limit of zero thickness in a full analytical manner. Hence, the closed form bifurcation solution is obtained. Finally, the result is compared with the classical one.

• Journal of Advanced Marine Engineering and Technology
• /
• v.17 no.4
• /
• pp.11-19
• /
• 1993

The experimental study was carried out to investigate the stability and the performance characteristics of the aero-valved pulsating combustion system with maximum operating capacity of 60KW. The effect of geometry of combustion system on the stable condition, the flammability limit, the total pressure oscillation amplitude, and the operating frequency can be identified, and the maximum turn-down-ratio is obtained up to 3.3. The total pressure oscillation amplitude can be controlled by tunning the length of the air inlet pipe. The empirical equation with which the operating frequency can be approximated is proposed and the discrepancy is within 5%. The volumetric efficiency is identified to be one of the important parameters determining the upper flammability limit and the maximum value of which is approximately 22%.

• Proceedings of the KIEE Conference
• /
• 1991.11a
• /
• pp.35-38
• /
• 1991

Recent, problems on the voltage-instability have been paid attention in power system and methods to find the limit of voltage-stability, concerned with these problems, were developed. However, these methods are short of precision on the limit of voltage-instability. Here, using the second-order load flow, constraint equation(d Pi/d Vi=0) and its patial differentiations are precisely formulated. Also, since the taylor series expansion of power flow equations terminates at the second-order terms, partial differentiations of constraint equation, that is Hessian, are constant. Then, Hessian matrix are calculated once during iteration process.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.580-585
• /
• 2004

The purpose of this study is the stability evaluation of soil slope according to inclination of upper natural slope. Upper natural slope breeds loss of slope by inflow in slope of surface water by rainfal1 and f1uctuation of amount of materials in slope through method of cutting slope according to degree of inclination. Basis of standard inclination does not consider of inclination of upper natural slope and is presented uniformly. Therefore, in this study, analyzed stability of inclination of upper natural slope through limit equilibrium analysis. Result is same as following. First, safety factor through limit equilibrium analysis is almost direct decrease when gradient of soil slope is 1:1.2, 1:1.5. However, when gradient of soil slope is 1:1.0, 1:0.7, if sinclination of upper natural slope are $20^{\circ}$, it shows tendency that decrease of safety factor becomes low rapidly. Second, when when gradient of soil slope is fixed, inclination of upper natural slope increase tendency(maximum 3.0 times) that decrease of safety factor.

• The Journal of Korean Physical Therapy
• /
• v.28 no.4
• /
• pp.221-226
• /
• 2016

Purpose: This study was conducted to evaluate the effects of neck and trunk stabilization exercise on static and dynamic balance in older adults. Methods: A total of 30 older adults participated in this study. Participants were randomly assigned to the neck and trunk stabilization exercise group (NTSG) (n=15) or the trunk stabilization exercise group (TSG) (n=15). The NTSG performed a trunk stabilization exercise added to a neck stabilization exercise that included biofeedback. Both groups received training for 30 minutes per day three times per week for eight weeks. The anterior, posterior limit of stability and sway length was used to measure static balance ability, while the timed up and go (TUG) test was used to measure dynamic balance ability. Results: Participants showed significant differences in sway length, anterior limit of stability, posterior limit of stability, and the results of the TUG test between their pre- and post mediation evaluations (p<0.05). The NTSG showed a more significant increase than the TSG (p<0.05). Conclusion: According to the results of this study, both exercises effectively improved static and dynamic balance ability. However, the neck and trunk stabilization exercise is more efficient for increasing the balance ability of older adults.

• Journal of the Korean Society of Physical Medicine
• /
• v.9 no.3
• /
• pp.255-262
• /
• 2014

PURPOSE: This study was to investigate the effectiveness of TENS on balance in stroke patients by analyzing some components such as foot pressure, limit of stability and velocity sway after providing somatosensroy input using TENS. METHODS: Twenty five subjects participated and were randomly divided into two groups, TENS group (n=13) and control group (n=12) by the computer program. Interventions were given to subjects 5 days a week for four weeks. TENS group were treated with TENS for 60 minutes in addition to the conventional therapy which included 30-minute exercise and rehabilitation ergometer training for 15 minutes. Control group performed only conventional therapy. TENS was applied on the skin of soleus, tibialis anterior, tensor fascia latae and vastus medialis in affected side. Foot pressure, limit of stability and velocity sway for balance test were measured using Biorescue. RESULTS: TENS group was significantly increased limit of stability and foot pressure in affected side more than control group. And in eye closed condition, TENS group was significantly decreased velocity sway more than control group. CONCLUSION: The application of TENS is effective to improve the somatosensory input of affected side and to increase the motor function and balance ability.

• Journal of the Korean Geosynthetics Society
• /
• v.8 no.3
• /
• pp.17-23
• /
• 2009

Conventional methods of reinforced slope analysis based on the concept of limit equilibrium have been widely adopted mainly due to their simplicity and short computation time. But depending upon the assumptions on the inter-slice forces, the factor of safety resulting from the limit equilibrium method is not uniquely determined. This paper describes a method to calculate the factor of safely of a slope using a numerical analysis. Recently some useful analysis techniques (Strength reduction method and the stability method using stress fields) by numerical analysis are proposed and their theory and characteristics applications are studied and investigated with simple examples in this paper.