• 융합신호처리학회논문지
• /
• 제11권4호
• /
• pp.303-309
• /
• 2010

본 논문에서는 KS 표준 시표(Optotype)를 이용한 자가 시력 측정의 새로운 방법을 제안한다. 제안한 시스템은 시력 측정 응답에 있어서 피검자 편의성을 위한 피검사자의 손-동작 인식(Hand-Gesture Recognition) 방법을 제공한다. 또한 검사자가에 필요 없는 컴퓨터에 의한 무작위 자동 시표 조정으로 검사자의 주관적인 판단이나 피검자의 암기에 의한 추측이 배제된 객관적 시력 측정이 가능하다. 특히, 2006년에 한국 표준 협회에서 정의한 표준 시표와 그 제시법(KS P ISO 8596)에 따라 시스템을 구현함으로써 시스템에 대한 신뢰성이 보장되고, 측정된 시력 정보의 데이터베이스 관리 기능은 피검자의 시력 정보가 필요한 전자의료기록(EMR) 시스템을 위한 전자 정보 전달이 용이하다. 구현된 시력 측정 시스템은 피검자를 대상으로 실제 시력표를 이용하여 측정한 방법과 비교 실험한 결과, 오차한계 ${\pm}1$ 시력등급 내에서 98%의 정확성을 보였다.

• 한국산학기술학회논문지
• /
• 제1권1호
• /
• pp.15-22
• /
• 2000

다상유체의 작동에 의해서 그 기능을 수행하는 산업기계는 매우 광범위하게 이용된다. 이들 중 일부는 서로 분리된 2상 유체가 반대방향으로 흐르는 특성을 이용하고 있다. 서로 반대방향으로 흐르는 액체상과 기체상의 최대 유량은 역류유동제한 현상으로 제한된다. 이상유동의 질량 및 운동량 보존 방정식을 세우고 쌍곡선형 방정식이 시스템의 특성방정식으로부터 역류유동제한 현상을 예측할 수 있는 모델을 개발하였다. 현재의 모델은 액체상 유입부의 기하학적 모양이 수직이거나 이와 유사한 형태로 되어 있어서 주변에 비등류가 형성되는 경우에 적용된다. 이 모델은 액체와 기체 사이의 질량전달을 일으키는 기계에 대한 유체역학적 운전제한 조건으로 이용될 수 있다.

• 멤브레인
• /
• 제7권3호
• /
• pp.142-149
• /
• 1997

비대칭형 막기공을 통한 뉴톤 유체의 발산흐름(diverging flow)에 대한 심도있는 해석 결과를 제시하였다. 막기공 모델의 일반적 형태인 슬릿(slit)과 원뿔(cone)형 채널에 대해 미동흐름(creeping flow)을 적용하여 유속분포 관계식을 구하였다. 유속분포의 고찰로부터 발산각도 $\alpha$$\longrightarrow$0 인 경우는 윤활근사법(lubrication approximation)이 적용되어 Poiseuille 흐름으로 되는 것을 확인하였고, 발산각도가 증가할수록 벽면부근에서의 유속분포는 결핍(depletion)됨과 아울러 전체유속은 감소하였다. 구해진 속도분포와 압력분포의 관계식으로부터 투과유량에 대한 이론식을 도출하였다. 예측된 결과는 기공의 비대칭성이 증가할수록 그에 따른 투과유량은 점차 증가하는 거동을 보였다. 본 연구의 이론결과는 궁극적으로 막여과에의 응용 측면과 밀접하게 연관되어 있다.

• 한국문헌정보학회지
• /
• 제8권
• /
• pp.73-101
• /
• 1981

Retrieval effectiveness is the principal criterion for measuring the performance of an information retrieval system. The effectiveness of a retrieval system depends primarily on the extent to which it can retrieve wanted documents without retrieving unwanted ones. So, ultimately, effectiveness is a function of the relevant and nonrelevant documents retrieved. Consequently, 'relevance' of information to the user's request has become one of the most fundamental concept encountered in the theory of information retrieval. Although there is at present no consensus as to how this notion should be defined, relevance has been widely used as a meaningful quantity and an adequate criterion for measures of the evaluation of retrieval effectiveness. The recall and precision among various parameters based on the 'two-by-two' table (or, contingency table) were major considerations in this paper, because it is assumed that recall and precision are sufficient for the measurement of effectiveness. Accordingly, different concepts of 'relevance' and 'pertinence' of documents to user requests and their proper usages were investigated even though the two terms have unfortunately been used rather loosely in the literature. In addition, a number of variables affecting the recall and precision values were discussed. Some conclusions derived from this study are as follows: Any notion of retrieval effectiveness is based on 'relevance' which itself is extremely difficult to define. Recall and precision are valuable concepts in the study of any information retrieval system. They are, however, not the only criteria by which a system may be judged. The recall-precision curve represents the average performance of any given system, and this may vary quite considerably in particular situations. Therefore, it is possible to some extent to vary the indexing policy, the indexing policy, the indexing language, or the search methodology to improve the performance of the system in terms of recall and precision. The 'inverse relationship' between average recall and precision could be accepted as the 'fundamental law of retrieval', and it should certainly be used as an aid to evaluation. Finally, there is a limit to the performance(in terms of effectiveness) achievable by an information retrieval system. That is : "Perfect retrieval is impossible."

• 한국ITS학회 논문지
• /
• 제7권5호
• /
• pp.53-63
• /
• 2008

교본 연구는, 구간속도 검지를 위한 기존의 방법인 프로브차량 방식과 차량 번호판 인식 방식의 문제점을 보완할 수 있는 대안으로써, 도로 구간 시.종점에서의 차량 시퀀스 패턴을 이용하여 구간속도 검지가 가능토록 하는 알고리즘을 개발, 제시하였다. 본 알고리즘은 구간 시.종점에서의 차량들을 '차종 순차(Precedence)패턴을 순서대로 나열한 일정한 길이의 시퀀스 그룹'으로 인식하고, 종점에서의 특정 시퀀스에 대응하는, 시점에서의 시퀀스를 탐색하여 가장 유사도가 높은 시퀀스를 동일 그룹으로 간주하여 해당 구간의 통행 시간을 산출하였다. 유사도 비용의 정의에 따라 세 가지의 모델을 제시하였으며, 차량 유출입에 의한 이상치를 제거하고 가공함으로써 정보제공 주기에 가장 적합한 구간 대표 통행시간을 산출할 수 있도록 하였다. 컴퓨터 모의 실험을 통해 구간길이와 통과차량 수를 증가시키면서 차종별, 시.종점의 시퀀스 길이별로 반복 시뮬레이션 한 결과, 평균 최대 오차율 3.46%로서 현장 적용성에서 뛰어난 가능성을 보였다.

• 한국정보통신학회논문지
• /
• 제12권4호
• /
• pp.611-619
• /
• 2008

본 논문에서 구현한 2.5D 맵핑(mapping) 시스템은 다양한 질감과 패턴에 따른 패션 의상의 모델 사진 이미지를 그대로 살려 외각선 영역 위에 드레이핑(draping)함으로써 새로운 디자인을 창출할 수 있고, 직접 샘플이나 시제품을 제작하지 않고도 시뮬레이션만으로 의상 작품을 확인할 수 있다. 또한 원단 디자인과 최종 제품의 상태를 정확하게 예측할 수 있는 기능을 제공하며, 원단과 모델 사진 이미지의 데이터베이스 구축으로 쉽고 빠르게 드레이핑함으로써 패션 업계의 경쟁력 향상과 비용 절감 효과를 가져 올 수 있다. 2.5D 맵핑 시스템은 보다 자연스러운 드레이핑을 위하여 메쉬 워프 알고리즘 모듈, 명암 추출과 적용 모듈, 맵핑 영역 추출 모듈, 메쉬 생성과 변형 모듈, 2.5D 맵핑 모듈로 구성하여 구현하였다. 향후 연구과제는 2.5D 맵핑 시스템의 구현 기술을 기반으로 하여 3D 의복 기술과 3D 인체 구현 기술을 접목한 3D 패션 디자인 시스템을 연구하여 2.5D 맵핑 기술의 표현 한계를 극복할 계획이다.

• Earthquakes and Structures
• /
• 제5권1호
• /
• pp.83-109
• /
• 2013

A simple damper optimization method is proposed to find optimal damper allocation for shear buildings under both target added damping ratio and interstorey drift ratio (IDR). The damping coefficients of added dampers are considered as design variables. The cost, which is defined as the sum of damping coefficient of added dampers, is minimized under a target added damping ratio and the upper and the lower constraint of the design variables. In the first stage of proposed algorithm, Simulated Annealing, Nelder Mead and Differential Evolution numerical algorithms are used to solve the proposed optimization problem. The candidate optimal design obtained in the first stage is tested in terms of the IDRs using linear time history analyses for a design earthquake in the second stage. If all IDRs are below the allowable level, iteration of the algorithm is stopped; otherwise, the iteration continues increasing the target damping ratio. By this way, a structural response IDR is also taken into consideration using a snap-back test. In this study, the effects of the selection of upper limit for added dampers, the storey mass distribution and the storey stiffness distribution are all investigated in terms of damper distributions, cost function, added damping ratio and IDRs for 6-storey shear building models. The results of the proposed method are compared with two existing methods in the literature. Optimal designs are also compared with uniform designs according to both IDRs and added damping ratios. The numerical results show that the proposed damper optimization method is easy to apply and is efficient to find optimal damper distribution for a target damping ratio and allowable IDR value.

• 한국인구학
• /
• 제8권2호
• /
• pp.79-92
• /
• 1985

Fertility has been declined since 1966 (see Table 1). This fertility reduction was duely caused by age at first marriage, induced abortion and contraceptive practice which has been largely increased in recent years. Although tbe proximate determinant such as induced abortion, age at marriage and breastfeeding can and do have an effect on fertility, the principal cause of the reduction in fertility in Korea during the fertility transition can be supported by correlation between level of fertility and contraceptive prevalence (See Fig. 4). Taking a regression equation between fertility (TER. Y) and prevalence level (X), the total fertility rate in 1984 was estimated as 1.9 and 2.1 based on lenear and expotential function shown as follow; $Y_1$=5.709-0.0549 X and $Y_2$_______80________ 1+e2.433+0.017X ($R^2$=O. 93) ($R^2$=0. 96) Where $Y_1$ and $Y_2$ denote total fertility rates obtained through two equations respectivelly. The peak of contraceptive prevalence was assumdd as 80 percent which is almost upper limit in human society. On the other hand, an observed value of 1984 fertility level obtained from five month period shows 2.1 which is coincident with logistic fitting after the adjustment of response error assumed around 10 to 20 percent, At any rate, fertility of Korean women will have been reached replacement level (2.1) by 1985.Thus policy for family planning program must be reviewed toward the direction of integrated approach particularly with MCH program inasmuch as fertility in Korea has already shown population replacement level that require more good quality of service in family planning and their There must be an advanced level of fertility in Korea because wide use of contraception and induced life abortion and age at marriage will effect modern fertility which shows up and down trend between 2.1 and 1.5 in general.

• Molecules and Cells
• /
• 제44권9호
• /
• pp.647-657
• /
• 2021

As a pancreatic inflammatory marker, regenerating islet-derived protein 3A (Reg3A) plays a key role in inflammation-associated pancreatic carcinogenesis by promoting cell proliferation, inhibiting apoptosis, and regulating cancer cell migration and invasion. This study aimed to reveal a novel immuno-regulatory mechanism by which Reg3A modulates tumour-promoting responses during pancreatic cancer (PC) progression. In an in vitro Transwell system that allowed the direct co-culture of human peripheral blood-derived dendritic cells (DCs) and Reg3A-overexpressing/ silenced human PC cells, PC cell-derived Reg3A was found to downregulate CD80, CD83 and CD86 expression on educated DCs, increase DC endocytic function, inhibit DC-induced T lymphocyte proliferation, reduce IL-12p70 production, and enhance IL-23 production by DCs. The positive effect of tumour-derived Reg3A-educated human DCs on PC progression was demonstrated in vivo by intraperitoneally transferring them into PC-implanted severe combined immunodeficiency (SCID) mice reconstituted with human T cells. A Reg3A-JAK2/STAT3 positive feedback loop was identified in DCs educated with Reg3A. In conclusion, as a tumour-derived factor, Reg3A acted to block the differentiation and maturation of the most important antigen-presenting cells, DCs, causing them to limit their potential anti-tumour responses, thus facilitating PC escape and progression.

• 대한건축학회연합논문집
• /
• 제20권6호
• /
• pp.41-46
• /
• 2018

The context of innovation in which we evolve today, subtracts us in a spacial reality and virtuality (digital) that aimed less and less to interact with natural processes which could converge to new possible relationships in the world. We constantly live in presence of fluctuations and imperceptible natural energies (wind, solar radiation, etc.) defined by flows, their own physicality, which remains without being virtual, elusive. This study first outlines how these energies already exploited within the framework of production, could be thought as interactive of our habitat's space dimension, as a prolongation of a physical and material environment built by men and for men, giving rise to new social, cultural dynamics, and making natural complexity of our space vivid, comprehensible with new visual and physical clues. In recent days, where lifestyles are changing, architecture no longer needs to limit its scope of creation to only built structures. Based on a deeper understanding of human and through new potential advanced technologies (kinetic system, etc), it is time to fundamentally diagnose what environments or devices contribute to our lives. Architecture becomes ${\ll}interface{\gg}$, step up its fundamental role, and newly defines the sturdy image and tectonics of existing environment, establishing a stance to search for a new typology. In the end, building will show two simultaneous and distinctive connections related to its physical existence: reality in its function and irreductibility, in its ability to forge new dynamic connections with its environment, hybridizing the spatial dimension to a new form of physicality, adaptive and incessantly flexible in the dimension time, becoming a vessel for ever changing contemporary lifestyles.