• 한국전기전자재료학회논문지
• /
• 제17권8호
• /
• pp.846-851
• /
• 2004

Transparent conducting indium tin oxide (TC-ITO) thin films on polymeric substrates have been deposited by a dc reactive magnetron sputtering without heat treatments. The polymeric substrates are acryl (AC), poly carbornate (PC), and polyethlene terephthalate (PET) as well as soda lime glass is also used to compare with the polymeric substrates. Sputtering parameters are an important factor for high quality of TC-ITO thin films prepared on polymeric substrates. Furthermore, the material, electrical and optical properties of as-deposited ITO films are dominated by the ratio of oxygen partial pressure. As the experimental results, the surface roughness of ITO films becomes rough as the oxygen partial pressure increases. The electrical resistivity of as-deposited ITO films decreases initially, and then increases with the increase of oxygen partial pressure. The optical transmittance at visible wavelength for all polymeric substrates is above 82 %.

• 한국지반환경공학회 논문집
• /
• 제1권1호
• /
• pp.19-26
• /
• 2000

본 연구에서는 일련의 실내시험을 통하여 제지회의 기본특성, 다짐, 압축강도, 압밀, 투수 및 CBR 특성을 분석하여 폐기물 매립장의 차수재와 복토재 등의 건설재료로서 제지회의 활용가능성을 연구하였다. 본 연구에서 제지회는 청주근교 4개의 제지공장에서 채취된 시료를 사용하였으며, 제지회의 투수특성을 확보하기 위하여 혼합재로서 벤토나이트와 소석회를 사용하였다. 시험결과, 벤토나이트와 소석회의 혼합비가 증가함에 따라 최대건조단위중량은 증가하였으며, 일축압축시험결과 제지회는 복토재의 일축압축강도 기준을 만족하고 있는 것으로 나타났다. 또한, 벤토나이트의 혼합비가 증가할수록 투수계수는 감소하였으며, 차수재로 사용 가능한 투수계수가 $1{\times}10^{-7}cm/sec$ 이하로 되는 벤토나이트의 혼합비는 30%로 평가되었다.

• Geomechanics and Engineering
• /
• 제25권2호
• /
• pp.143-157
• /
• 2021

Expansive soil is the most predominant geologic hazard which shows a large amount of shrinkage and swelling with changes in their moisture content. This study investigates the macro-mechanical and micro-structural behaviours of dredged natural expansive clay from coal mining treated with ordinary Portland cement or hydrated lime addition. The stabilised expansive soil aims for possible reuse as pavement materials. Mechanical testing determined geotechnical engineering properties, including free swelling potential, California bearing ratio, unconfined compressive strength, resilient modulus, and shear wave velocity. The microstructures of treated soils are observed by scanning electron microscopy, x-ray diffraction, and energy dispersive spectroscopy to understand the behaviour of the expansive clay blended with cement and lime. Test results confirmed that cement and lime are effective agents for improving the swelling behaviour and other engineering properties of natural expansive clay. In general, chemical treatments reduce the swelling and increase the strength and modulus of expansive clay, subjected to chemical content and curing time. Scanning electron microscopy analysis can observe the increase in formation of particle clusters with curing period, and x-ray diffraction patterns display hydration and pozzolanic products from chemical particles. The correlations of mechanical properties and microstructures for chemical stabilised expansive clay are recommended.

• 한국작물학회지
• /
• 제27권2호
• /
• pp.137-140
• /
• 1982

두과목초의 근류균 접종방법 개선책의 일환으로써 3수준의 근류균농도, 즉 10, 20, 30%; 3종류의 접착제 즉 gum arabic, methyl cellulose 및 carboxy methyl cellulose; 그리고 4종류의 석회와 calcium carbonate를 포함한 5종류의 피복재료를 사용하여 근류균을 접종한 후에 plate count법으로 생존하고 있던 근류세포수를 측정하여 그 효과를 평가하였던 바 다음과 같은 결론을 얻었다. 1. New Zealand산 peat slurry의 근류균을 사용할 경우 근류균을 10%에서 3.5$\times$$10^9$ 개로써 표준에 가까운 근류균수를 확보할 수 있었다. 2. 접착제로서 gum arabic은 40% 용액에서 methyl cellulose는 5% 용액 그리고 carboxy methyl cellulose는 4% 용액으로 사용하였을 때 최대착생수를 나타내었으나 그 중에서 methyl cellulose 5% 용액이 적합한 것으로 보였다. 3. 피복재료로서 치과용석회(Lime A)는 타재료에 비하여 양호한 결과를 얻을 수 있었다.

• 한국문화재보존과학회:학술대회논문집
• /
• 한국문화재보존과학회 2003년도 제18회 발표논문집
• /
• pp.42-47
• /
• 2003

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2018년도 공동국제학술발표회
• /
• pp.124-124
• /
• 2018

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1995년도 연약지반 안정처리 시공.관리 세미나
• /
• pp.88-116
• /
• 1995

The applicability of marine clay and banking material as landfill liner and supporting layer was examined, where additives (cement, lime, Mg0, bentonite and ESCA) were mixed with these soils. The mixtures were tested for the unconfined compressive strength, bending strength, permeability, and better results than existing solidifying agents were obtained. The freezing-thawing test is under way.

• 자원리싸이클링
• /
• 제14권2호
• /
• pp.10-18
• /
• 2005

화력발전소의 배연탈황공정에서 발생된 탈황석고의 용도확대 및 천연 무수석고의 대체 가능성을 조사하기 위하여 탈황석고로부터 건식 열처리법에 의한 무수석고의 제조특성 및 탈황 무수석고에 대하여 시멘트 및 콘크리트 2차 제품으로의 적용 특성을 조사하였다. 탈황석고로부터 Ⅱ형 무수석고의 상전이는 700$^{\circ}C$ 부근에서 완전히 종료되었고, 이러한 Ⅱ형 무수석고의 상전이 과정에서 입자크기의 변화 등을 확인할 수 있었다. 천연 무수석고와 탈황 이수석고로부터 제조된 무수석고는 화학성분 조성, 입자크기, 열적특성 등의 물성이 유사하였다. 무수석고를 시멘트나 콘크리트 2차 제품에 적용시킬 때 부식문제를 발생시킬 수 있는 황산기(SO$_4^{2-}$)의 용출실험 결과, 700$^{\circ}C$에서 1시간 열처리로 제조된 탈황 무수석고는 천연 무수석고에 비하여 황산기의 용출량이 약 50 wt.% 감소됨을 확인할 수 있었고, 소석회(Ca(OH)$_2$) 3 wt.%의 첨가에 의해 황산기의 용출량이 천연 무수석고에 비하여 약 70 wt.% 감소시킬 수 있었다. 탈황 무수석고를 시멘트 및 콘크리트 2차 제품에 적용시킨 결과, 압축강도 등의 물성이 천연무수석고에 비하여 동등 또는 우수함을 확인할 수 있었다.

• 한국정밀공학회지
• /
• 제18권11호
• /
• pp.93-100
• /
• 2001

Brittle materials are very weak for impact because of typical characteristics which happen to be easily fractured with low fracture toughness and crack sensitivity. When brittle materials are subjected to impact due to small spheres, high contact pressure is occurred to impact surface and then local damage on specimen is developed, since there are little plastic deformations due to contact pressure compared to metals. This local damage is a dangerous factor which gives rise to final fracture of structures. In this research, the crack propagation process of soda lime glass by impact of small sphere is explained and the effects of the constraint conditions of impact spheres and materials for the material damage were studied by using soda-lime glass. that is the effects for the materials and sizes of impact ball, thickness of specimen and residual strength. Especially, this research has focused on the damage behavior of ring crack, cone crack and several kinds of cracks.

• 한국염색가공학회지
• /
• 제24권4호
• /
• pp.260-269
• /
• 2012

The aim of this study was to develop higher-value added dyeing materials with the fermentation-dyeing -mordanting system using only the natural ingredients by integrating traditional fermentation techniques with traditional dyeing technique. Nuruk, which is used mainly to ferment traditional foods, was used as a fermenting agent to ferment 5 different types of materials. Acidic burnt alum and alkaline calcium hydroxide were used as natural mordants. The dyeability checked after fermentation showed that both cotton and silk mordanted with Gardenia jasminoides did not show notable changes, and 10 days of fermentation was found to be appropriate. Sophora japonica L. performed better on cotton materials mordanted with slaked lime, and alkaline mordants were found to be more effective than acidic ones. With Rheum coreanum, a fermentation period of more than 24 days ($5^{th}$ fermentation) worked best on cotton material, showing a 5 fold increase in the K/S value after the $5^{th}$ slaked lime fermentation than with no fermentation. Rhus javanica L. was found to increase the color fastness to gentle washing and the fastness to light was found to possess 4 means that natural dyed fabric have the highest level of durability, the grade 1 the lowest level of fastness.