• Asian Journal of Turfgrass Science
• /
• v.5 no.2
• /
• pp.69-73
• /
• 1991

This experiment was carried out in order to study the effect of nitrogen fertilization on the growth of Colonial bentgrass and thatch accumulation under no removing clipping residues. Nitrogen fertilization was applied as 4 levels, 10, 20, 25 and 20gN/m$^2$, respectively. The results were as follows : 1.Response of plant length and dry weight of thatch to N fertilization were significant differences between N levels. It suggested that N fertilization with no clipping residues greatly affected to the growth and thatch accumulation of colonial bentgrass.2.Plant length, the dry weight of clipping residues and coverage were obtained the highest values at 20g N. It was assumed that 20gN/m$^2$ is the limiting N level to obtain the favorable growth of Colonial bentgrass. 3.The dry weight of thatch and lignin content were increased with high nitrogen fertilization level. 4.The dry weight of thatch indicated positive significant correlation with lignin content. 5. The dry weight of thatch per N(THg/N) at 20g~25g/m$^2$ levels were obtained the lowest values than of other levels of N. It may be due to the stimulating of microbial activity by adequate to N fertilizers which increased mineralization of thatch.

• Journal of Animal Science and Technology
• /
• v.63 no.5
• /
• pp.1098-1113
• /
• 2021

Maturation process of alfalfa (Medicago sativa L.) could be prevented by the reduction of lignin content in terms of conventional breeding or transgenic technology. Alfalfa could exhibit higher leaf/stem ratio, with a concern of yield loss. The objective of this study was to compare forage yield and nutritive value of low lignin alfalfa and two reference varieties subjecting to two harvest intervals and three seeding rates. The experimental design was a randomized complete block in a split-split plot arrangement with four replicates, where harvest intervals (28-day and 35-day) were assigned to whole plots, seeding rates were subplots, and varieties were sub-subplots. The weighted mean nutritive value was applied to two production years of 2016 and 2017. Hi-Gest 360 (low lignin alfalfa) provided similar yield potential and increased nutritive value compared to two reference varieties. Over a two-year production period, alfalfa harvested at every 28-day interval provided more economic returns than those at 35-day interval. For the seeding year and first production year, five cuts made by the 28-day interval produced more yield than four cuts by the 35-day interval. Due to limited rainfall in May 2017, a sharp drop of the first cutting overturned the advantage of the five-cut system. Shorter intervals between harvests generally increased crude protein (CP) concentrations. The differences of relative feed value (RFV) between two harvest intervals tended to be great during the first and second cuttings. Overall, harvest interval had a large effect on nutritive value and a more significant effect on alfalfa dry matter yield than variety selection. Seeding rate did not affect alfalfa yield and nutritive value.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.3
• /
• pp.357-365
• /
• 2019

Objective: The experiment was conducted to evaluate the effects of four fungal pretreatments on the nutritional value of Camellia seed residues, and to evaluate the feeding value of pretreated Camellia seed residues for ruminants. Methods: Camellia seed residues were firstly fermented by four lignin degrading fungi, namely, Phanerochaete chrysosporium (P. chrysosporium)-30942, Trichoderma koningiopsis (T. koningiopsis)-2660, Trichoderma aspellum (T. aspellum)-2527, or T. aspellum-2627, under solid-state fermentation (SSF) conditions at six different incubation times. The nutritional value of each fermented Camellia seed residues was then analyzed. The fermentation profiles, organic matter degradability and metabolizable energy of each pre-treated Camellia seed residue were further evaluated using an in vitro rumen fermentation system. Results: After 5 days of fermentation, P. chrysosporium-30942 had higher degradation of lignin (20.51%), consumed less hemicellulose (4.02%), and the SSF efficiency reached 83.43%. T. koningiopsis-2660 degraded more lignin (21.54%) and consumed less cellulose (20.94%) and hemicellulose (2.51%), the SSF efficiency reached 127.93%. The maximum SSF efficiency was 58.18% for T. aspellum-2527 and 47.61% for T. aspellum-2627, appeared at 30 and 15 days respectively. All the fungal pretreatments significantly improved the crude protein content (p<0.05). The Camellia seed residues pretreated for 5 days were found to possess significantly increased organic matter degradability, volatile fatty acid production and metabolizable energy (p<0.05) after the treatment of either P. chrysosporium-30942, T. koningiopsis-2660 or T. aspellum-2527. The fungal pretreatments did not significantly change the rumen fermentation pattern of Camellia seed residues, with an unchanged ratio of acetate to propionate. Conclusion: The fungi showed excellent potential for the solid-state bioconversion of Camellia seed residues into digestible ruminant energy feed, and their shorter lignin degradation characteristics could reduce loss of the other available carbohydrates during SSF.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.6
• /
• pp.31-39
• /
• 2003

The enzymatic isolation of residual lignins obtained from spruce and beech pulps (obtained by sulfite, kraft, ASAM and soda/AQ/MeOH pulping processes) and their characterization was described in previous publications. Here, the residual lignins have been submitted to potassium permanganate oxidation (KMnO₄ degradation), and 9 aromatic carboxylic acids (3 of them are dimeric) were identified after methylation with diazomethane by GC/MS. The analytical challenge during qantification by the internal standard methods was the partly high protein content of the samples, which resulted in elevated anisic acid yields in the degradation mixture of sulfite residual lignins. The results are compared with the KMnO₄ degradation of the corresponding MWLs and discussed in terms of S/G ratios and degrees of condensation. The latter was calculated as a quotient between the aromatic carboxylic acids derived from condensed and non-condensed lignin structures. Typical degradation patterns for the various processes have been observed. Among other parameter, the relative compositions between iso-hemipinic acid (which is for condensation in pos. 5 of the aromatic ring) and meta-hemipinic acid and 3,4,5-trimethoxyphthalic acid (both are for condensation in pos. 6 of the aromatic ring) was found to be process specific. Kraft and soda/AQ/MeOH residual lignins yielded higher amounts of iso-hemipinic acid. In contrast, the relative yields of meta-hemipinic acid and 3,4,5-trimethoxyphthalic acid (the latter in beech lignins) are higher in sulfite and particularly in ASAM residual lignin. In case of beech residual lignins the amount of acids originated from non-condensed syringyl type lignin units was surprisingly high. The condensation degree of residual lignins was shown to be generally higher than that of MWLs. This was especially true for the G units. ASAM residual lignin exhibited very high S/G ratios and degrees of polymerization. Causality between condensation degree and total yield of degradation products was demonstrated.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.17 no.4
• /
• pp.29-35
• /
• 2009

Pyrolysis is recently used as one of alternative methods of animal waste treatment. In this study bio-oil was produced at $550^{\circ}C$ in an auger reactor through pyrolysis process. Two pig waste mixtures were used, pig feces mixed with rice husks and pig feces mixed with sawdust. The main compositions of hemicellulose, lignin, cellulose, protein, and fat were analyzed chemically. Based on the main composition results obtained, the contents of holocellulose (the sum of hemicellulose and cellulose) and lignin had a significant positive effect on bio-oil production, and there was a significant negative effect of ash content on bio-oil yield. The interactions between the different feedstocks were evaluated, and it was concluded that the interaction between pig feces and rice husks was minimal, whereas the interaction between pig feces and sawdust was significant.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2003.11a
• /
• pp.17-26
• /
• 2003

Nalita wood(Trema orientalis) is one of the fastest growing woods in the world. It may be a viable species for pulpwood. The physical, chemical and morphological properties of Nalita were studied. The total lignin, pentosan and holocellulose content in Nalita wood were 24.7%, 22% and 81.2%, respectively. Its fiber length was about 0.92 mm, which are comparable to Acacia mangium. Nitrobenzene oxidation of Nalita wood meal indicated that the guaciayl and syringyl unit were the major constituent of Nalita lignin. Nalita produced 50% pulp yield at Kappa number 21 in soda-anthraquinone process. The strength properties of Nalita pulp were comparable to other tropical hardwood pulp. At $40_{\circ}$ SR, the breaking length, burst index, tear index and total energy absorption were 6000 m, $3.5kPa{\cdot}m^2/g\;and\;7.0mN{\cdot}m^2/g\;and\;75J/m^2$, respectively.

• Korean Journal of Microbiology
• /
• v.52 no.4
• /
• pp.503-504
• /
• 2016

Ochrobactrum anthropi AM3 was isolated for the ability to utilize lignin as a sole carbon and energy source from compost in South Korea. Here we report the 5.11 Mb draft genome of strain AM3 with a G+C content of 56.2%, which is helpful for understanding the genetic diversity among Ochrobactrum spp. and the mechanism of lignin degradation.

• Journal of Ginseng Research
• /
• v.19 no.1
• /
• pp.77-83
• /
• 1995

This study was conducted to investigate the chemical components of rusty root for seeking the cause of rust. Na, Fe contents were higher in various tissues of six-year-old rusty root than healthy root. Contents of total sugar in epidermis of rusty root was low but crude lignin and suborn contents were high. Crude lipid content increased with the rate of rusty symptoms in each part of root respectively. Pentadecanoic, stearic, oleic, lignoseric acid contents increased in cortex of tap root with the rate of rusty symptoms but decreased in pith. Total ginsenoside and crude saponin contents increased , in pith and cortex of tap root with the rate of rusty symptoms but decreased in lateral and fine root.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.3
• /
• pp.11-16
• /
• 2003

On nitrobenzene oxidation of aspen, spruce, and knauf wood meals gave rise to vanilline, syrigaldehyde, p-hydroxybenzoaldehyde, vanillic acid, and other minor oxidation products. The phenolic aldehydes (p-hydroxybenzaldehyde, vanilline, and syringaldehyde) are derived from oxidative degradation of the corresponding 4-hydroxyphenylpropane units and their ethers. The lignin content of knauf wood meals was different as the concentration of NaOH solution and cooking temperature. The lignin contents of aspen, spruce, and knauf wood meals were decreased as laccase treatment. The laccase caused C-oxidation, demethylation, cleavage in phenolic groups and C-C cleavage in syrigyl structures.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.6
• /
• pp.424-430
• /
• 2012

In this study, laccase activity, rate of weight loss and degree of lignin degradation of pine wood chips were determined during the liquid and solid state incubation with Polyporus brumalis. The results showed that laccase enzyme activity at untreated wood chip was gradually decreased after 20 days, but enzyme activity with wood chip treatment showed 10 times higher than untreated ones at 60 incubation days. Rate of weight losses of pine chip and rate of lignin loss were 23.4% and 6.3% by P. brumalis during 80 incubation days. Gene expression of pblac1 from P. brumalis was 3 times increased under pine chip treatment at 40 incubation days. Consequently, laccase activity of white rot fungi, P. brumalis, was increased at incubation with wood chip and pblac1 gene was important factor of lignin degradation. Therefore, to regulate lignin degrading enzyme gene expression by using the tools of biotechnology will be able to develop superior strains and it will be useful for pretreatment of lignocellulosic biomass at bioethanol production.