• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.20 no.4
• /
• pp.117-134
• /
• 2010

A passive RFID tag which received attention as a future technology for automatic and quick identification faces some difficulties about security problems such as tag authentication, reader authentication, data protection, and untraceability in addition to cost and reliable identification. A representative passive RFID technology is the ISO/IEC 18000-6 Type C which is an international standard for 900 MHz UHF-band. This standard has some difficulties in applying to the security services such as originality verification, tag's internal information protection, and untraceability, because it does not provide high-level security solution. In this paper, we summarize security requirements of ISO/IEC ITC 1/SC 31 international standardization group, propose security protocols suitable for the UHF-band passive RFID system using a crypto engine, and analyze its security strength. In addition, we verify that it is possible to implement a tag conforming with the proposed security protocols by presenting concrete command/response pairs and cryptographic method.

• ETRI Journal
• /
• v.32 no.5
• /
• pp.713-721
• /
• 2010

E-textile technology has earned a great deal of interest in many fields; however, existing wearable network protocols are not optimized for use with conductive yarn. In this paper, some of the basic properties of conductive textiles and requirements on wearable personal area networks (PANs) are reviewed. Then, we present a wearable personal network (WPN), which is a four-layered wearable PAN using bus topology. We have designed the WPN to be a lightweight protocol to work with a variety of microcontrollers. The profile layer is provided to make the application development process easy. The data link layer exchanges frames in a master-slave manner in either the reliable or best-effort mode. The lower part of the data link layer and the physical layer of WPN are made of a fabric serial-bus interface which is capable of measuring bus signal properties and adapting to medium variation. After a formal verification of operation and performances of WPN, we implemented WPN communication modules (WCMs) on small flexible printed circuit boards. In order to demonstrate the behavior of our WPN on a textile, we designed a WPN tutorial shirt prototype using implemented WCMs and conductive yarn.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.18 no.2
• /
• pp.1-8
• /
• 2022

The message propagation between vehicles must be efficiently performed to quickly transmit information between vehicles in vehicle ad hoc networks (VANETs). Broadcasting can be the most effective solution for propagating these messages. However, broadcasting can cause broadcast storm problems, which can reduce the performance of the overall network. Therefore, rapid information delivery in VANET requires a method that can propagate messages quickly without causing the broadcast storm problems. This paper proposes a lightweight and opportunistic broadcast (LOB) protocol that leverages the features of opportunistic routing to propagate messages quickly while minimizing the load on the network in VANETs where the network topology changes frequently. LOB does not require any routing information like greedy forwarding scheme, and neighboring nodes at the farthest distance within the range of transmission nodes are likely to be selected as forwarding nodes, and multiple forwarding candidate nodes like opportunistic routing scheme can increase packet transmission rates. Simulation results using ns-2 showed that LOB outperformed existing broadcast protocols in terms of packet rate and packet delay.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.374-380
• /
• 2017

The Internet of Things (IoT) refers to intelligent technologies and services that connect all things to the internet so they can interactively communicate with people, other things, and other systems. The development of the IoT environment accompanies advances in network protocols applicable to more lightweight and intelligent sensors, and lightweight and diverse environments. The development of those elemental technologies is promoting the rapid progress in smart car environments that provide safety features and user convenience. These developments in smart car services will bring a positive effect, but can also lead to a catastrophe for a person's life if security issues with the services are not resolved. Although smart cars have various features with different types of communications functions to control the vehicles under the existing platforms, insecure features and functions may bring various security threats, such as bypassing authentication, malfunctions through illegitimate control of the vehicle via data forgery, and leaking of private information. In this paper, we look at types of smart car services in the IoT, deriving the security threats from smart car services based on various scenarios, suggesting countermeasures against them, and we finally propose a safe smart car application plan.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.10
• /
• pp.90-98
• /
• 2008

PKI (Public Key Infrastructure) which is used for the security of E-commerce (Electronic-commerce) in wired internet is not suitable for the mobile phone because of the fundamental limitation of performance such as less memory and less powerful CPU. Therefore, we need to develop a wireless PKI (WPKI) that provides the similar security level as the wired PKI supporting mobile phone. In this paper, we propose a lightweight and secure Wireless Certificate Management Protocol (WCMP) that is executable to the mobile phone that has a constrained communication environment and limitation of performance, and show the implementation results of the scheme based on the mobile phone. We minimize data sizes processed in mobile phone, and optimize protocols for the certificate management. This results in the reduced module sizes to be able to install in mobile phone and shows as the same level as the wired CMP.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.1
• /
• pp.87-100
• /
• 2020

Researches on Post-quantum blockchain, which is a synthesis of blockchain and post-quantum cryptography[1], are relatively unrevealed areas but have needs to be studied with the regard to the quantum computers. However there could be several fundamental problems, e.g. unsustainably large size of public key and signature, or too lengthy time for sign and verification, if any post-quantum cryptography is adopted to the existing blockchain to implement post-quantum blockchain. Thus, a new method was proposed in this paper that produces fixed length of references for massive signatures and corresponding public keys to enable relatively lightweight transactions. This paper proposed the mechanism that included a new transaction structure and protocols, and demonstrated a post-quantum blockchain that the proposed mechanism was adopted. Through this research, it could enhance compatibility of blockchain regarding post-quantum digital signature, possibly reducing weights of the whole blockchain.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.10
• /
• pp.1895-1902
• /
• 2016

People and goods through the recent smart device, IoT to things and things are connected, it has emerged as the driving force of a new economic growth in the future. While conducting research of this international standardization organization in the IoT-based protocol, to the institutions and companies that belong to the standards bodies interests are different from each other, protocols have been developed also, different order, heterogeneous device interoperability has emerged is a problem that the lowering of. Therefore, in this paper, to investigate the structure of the MQTT and CoAP that are commonly used and trying to figure out the trend of low power consumption, a lightweight protocol that is suitable for IoT environment, process and standardization trends of evolution, features, analysis and on, to derive the advantages and disadvantages, and comparative analysis, it presented a development scheme for each protocol.

• Journal of Information Processing Systems
• /
• v.13 no.5
• /
• pp.1229-1242
• /
• 2017

In this paper, an interference aware distributed multi-channel MAC (IDMMAC) protocol is proposed for wireless sensor and actor networks (WSANs). The WSAN consists of a huge number of sensors and ample amount of actors. Hence, in the IDMMAC protocol a lightweight channel selection mechanism is proposed to enhance the sensor's lifetime. The IDMMAC protocol divides the beacon interval into two phases (i.e., the ad-hoc traffic indication message (ATIM) window phase and data transmission phase). When a sensor wants to transmit event information to the actor, it negotiates the maximum packet reception ratio (PRR) and the capacity channel in the ATIM window with its 1-hop sensors. The channel negotiation takes place via a control channel. To improve the packet delivery ratio of the IDMMAC protocol, each actor selects a backup cluster head (BCH) from its cluster members. The BCH is elected based on its residual energy and node degree. The BCH selection phase takes place whenever an actor wants to perform actions in the event area or it leaves the cluster to help a neighbor actor. Furthermore, an interference and throughput aware multi-channel MAC protocol is also proposed for actor-actor coordination. An actor selects a minimum interference and maximum throughput channel among the available channels to communicate with the destination actor. The performance of the proposed IDMMAC protocol is analyzed using standard network parameters, such as packet delivery ratio, end-to-end delay, and energy dissipation, in the network. The obtained simulation results indicate that the IDMMAC protocol performs well compared to the existing MAC protocols.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.6
• /
• pp.83-90
• /
• 2018

LoRa (Long Range) is a long-distance, low-power communication technology. Broader range of communication than NFC technology allows communication without having to install multiple APs and reduces the cost of initial infrastructure deployment. MQTT (Message, Queuing, Telemetry, Transport) protocol is also low power and lightweight protocols. It can increase module persistence and reduce maintenance costs when used with LoRa. In this paper, we developed a system for compiling various environmental information in a factory using LoRa and MQTT. Environmental sensor data from long distances can be monitored by the management system and the facilities in each workshop can be controlled. Performance tests have also shown that the use of LoRa and MQTT is effective in terms of long-distance and power consumption.

• Journal of Advanced Navigation Technology
• /
• v.23 no.2
• /
• pp.207-213
• /
• 2019

Recently, the importance for internet of things (IoT) security has increased enormously and hardware-based compact chips are needed in IoT communication industries. In this paper, we propose low-complexity crypto-processor that unifies advanced encryption standard (AES), academy, research, institute, agency (ARIA), and CLEFIA protocols into one combined design. In the proposed crypto-processor, encryption and decryption processes are shared, and 128-bit round key generation process is combined. Moreover, the shared design has been minimized to be adapted in generic IoT devices and systems including lightweight IoT devices. The proposed crypto-processor was implemented in Verilog hardware description language (HDL) and synthesized to gate level circuit in 65nm CMOS process, which results in 11,080 gate counts. This demonstrates roughly 42% better than the aggregates of three algorithm implementations in the aspect of gate counts.