• 한국해양공학회지
• /
• 제22권4호
• /
• pp.51-58
• /
• 2008

The objective of this study was to investigate the mechanical characteristics of fiber-reinforced lightweight soil using waste fishing net or monofilament for recycling both dredged soils and bottom ash. Reinforced lightweight soil consists of dredged soil, cement, air foam, and bottom ash. Waste fishing net or monoiament was added the mixture in order to increase the shear strength of the lightweight soil. Test specimens were fabricated with various mixing conditions, including waste fishing net content and monofilament content. Several series of unconfined compression tests and direct shear tests were carried out. From the experimental results, it was found that the unconfined compressive strength, as well as the stress-strain behavior of reinforced lightweight soil was strongly influenced by mixing conditions. In this study, the maximum increase in shear strength was obtained with either a 0.5% content of monofilament or 0.25% waste fishing net. The unconfined compressive strength of reinforced lightweight soil with monofilament was greater than that of reinforced lightweight soil with waste fishing net.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.383-393
• /
• 2006

This paper investigates strength characteristics and stress-strain behaviors of geogrid mixing reinforced lightweight soil. The lightweight soil was reinforced with geogrid in order to increase its compressive strength. Test specimens were fabricated by various mixing conditions including cement content, initial water content, air content and geogrid layer and then unconfined compression tests were carried out. From the experimental results, it was found that unconfined compressive strength as well as stress-strain behavior of lightweight soil were strongly influenced by mixing conditions. The more cement content that is added to the mixture, the greater its unconfined compressive strength. However, the more initial water content or the more air foam content, the less its unconfined compressive strength. It was observed that the strength of geogrid reinforced lightweight soil was increased due to reinforcing effect by the geogrid for most cases except cement content less than 20%. In reinforced lightweight soil, secant modulus $(E_{50})$ was increased as the strength increased due to the inclusion of geogrid.

• 한국통신학회논문지
• /
• 제32권4C호
• /
• pp.454-461
• /
• 2007

차세대 컴퓨터는 초경량 이동 컴퓨터로서 작은 크기에 휴대하기 편리하고 사용자가 이동 중이라도 주변의 휴대장치들과 통신하여 동적으로 사용자 상황에 맞는 서비스를 제공한다. 사용자 상황에 맞는 서비스를 제공하기 위해서는 사용자나 컴퓨터의 정보를 보호할 수 있도록 보안의 문제점이 해결되어야 하며, 전원 제약적이고, 시스템 제한적인 초경량 이동 컴퓨팅 환경에 맞는 보안 기술이 필요하다. 본 논문에서는 초경량 이동 컴퓨팅 환경에서 효율적으로 운영 가능한 컴포넌트 기반 미들웨어를 소개하고 미들웨어에서 동적으로 적재 및 실행되는 보안 컴포넌트를 설계하고 구현한다. 구현된 보안 컴포넌트는 RC5 알고리즘을 이용한 암호화 기술과 SHA-1 알고리즘을 이용한 인증 기술을 포함한다.

• 한국생산제조학회지
• /
• 제25권6호
• /
• pp.471-478
• /
• 2016

This paper describes a method to design a lightweight modular bridge for a railway infrastructure system. A lightweight design was achieved using the material selection method. Aluminum extrusions and honeycomb sandwich composites were selected as the best materials to reduce the weight of the upper structure of a conventional modular bridge made of carbon-steel material. The structural integrity of the lightweight modular bridge was evaluated under vertical and wind loads. The twisting and bending natural frequencies were also evaluated to investigate its dynamic characteristics. The results showed that the structural integrity and natural frequencies of the lightweight modular bridge, made of aluminum extrusion and sandwich composites, satisfied the design requirements. Moreover, it was found that the weight of the conventional modular bridge made of carbon steel could be reduced by a maximum of 47% using lightweight materials.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 추계 학술논문 발표대회
• /
• pp.127-131
• /
• 2009

The purpose of this study is to provide fundamental data on chloride diffusion from lightweight aggregate concrete by utilizing crushed stone-powder. Accordingly, the study performed experiments using concrete aggregates of Crushed Aggregate (CG), Single-sized Lightweight Aggregate (SLG), Continuous Graded Lightweight Aggregate (CLG), and using water-binder ratio of 0.4, 0.5, 0.6, and using binder of FA and BFS. The chloride diffusion coefficient is calculated after experiment based on NT BUILD 492. Diffusion coefficient of SLG and CLG were little bit higher than CG Concrete, but the difference is meaningless. Also, chloride diffusion coefficient indicates that it is highly affected by water-binder ratio, and it decreases with the decrease in water-binder ratio. The admixture substitution indicates decrease only with water-binder ratio of 0.4 for FA15% case, but admixture substitution indicates decrease with all levels of ratio for FA10 + BFS20% which means more appropriate. According to the analysis result of chloride diffusion from lightweight aggregate concrete, crushed stone-powder utilized lightweight aggregate concrete indicates higher chloride diffusion coefficient than CG concrete, which is not a significant difference, and can improve resistance through water-binder ratio and admixture substitution.

• 한국구조물진단유지관리공학회 논문집
• /
• 제7권4호
• /
• pp.139-147
• /
• 2003

국내 재래식 터널의 대부분에 존재하는 배면공동은 라이닝의 균열, 누수, 응력집중 등을 유발하여 터널 안정성에 큰 영향을 미치게 된다. 이러한 배면공동의 보강은 공동을 뒤채움하는 방법이 일반적으로 적용되고 있는데, 본 연구에서는 현재 산업폐기물로 취급되어 버려지고 있는 석분토를 이용하여 터널 뒤채움용 경량기포 충전재를 개발하였고, 실내물성시험과 노후터널에 대한 현장적용시험을 수행하여 개발 충전재의 적용성 평가를 실시하였다.

• 콘크리트학회논문집
• /
• 제21권5호
• /
• pp.669-677
• /
• 2009

철근콘크리트 연속 보의 전단거동에 대한 골재 최대직경의 영향을 평가하기 위하여 24개의 실험체가 실험되었다. 전경량, 모래경량 및 보통중량콘크리트 보에서 최대 골재직경은 4 mm에서 19 mm로 변하였으며, 전단경간비는 2.5와 0.6으로 있었다. 보통중량콘크리트 보의 무차원 최대전단내력에 대한 동일조건의 경량콘크리트 보의 무차원 최대 전단내력의 비가 ACI 318-05에서 제시하는 수정계수와 비교되었다. 파괴면에 대한 현미경 사진으로부터 경량콘크리트보의 파괴면은 주로 골재를 관통하지만 파괴되지 않은 경량골재들도 다수 발견되었는데, 이는 경량콘크리트 보의 전단거동 향상에 기여하였다. 이로 인해 경량콘크리트 연속 보의 최대전단내력은 골재 최대직경의 증가와 함께 증가하였는데, 그 증가기울기는 보통중량콘크리트 연속보에 비해 낮았다. ACI 318-05에서 제시하는 수정계수는 경량콘크리트 연속 보에서는 다소 불안전측에 있었는데, 그 불안전측은 최대 골재직경의 증가와 함께 증가하였다. 또한 ACI 318-05의 전단규정에 대한 안전성은 보통중량콘크리트 보에 비해 경량콘크리트 보에서 낮았다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.1029-1034
• /
• 2001

The effects of binder content and silica sand content on the freezing and thawing resistance of lightweight polymer concrete are examined. As a result, the mass loss and pulse velocity of lightweight polymer concrete decrease with increasing binder content and silica sand content. The relative dynamic modulus and durability factor of lightweight polymer concrete reaches minimum at a silica sand content of 50% and a binder content of 28%, and is inclined to increase with increasing binder content and silica sand content.

• Computers and Concrete
• /
• 제4권6호
• /
• pp.499-510
• /
• 2007

The densified mixture design algorithm (DMDA) was employed to manufacture high-performance lightweight concrete (LWAC) using silt dredged from reservoirs in southern Taiwan. Dredged silt undergoing hydration and high-temperature sintering was made into a lightweight aggregate for concrete mixing. The workability and durability of the resulting concrete were examined. The LWAC made from dredged silt had high flowability, which implies good workability. Additionally, the LWAC also had good compressive strength and anti-corrosion properties, high surface electrical resistivity and ultrasonic pulse velocity as well as low chloride penetration, all of which are indicators of good durability.

• Computers and Concrete
• /
• 제14권3호
• /
• pp.233-245
• /
• 2014

In this paper, a rule based Mamdani type fuzzy logic model for prediction of slippage at maximum tensile strength and slippage at rupture of structural lightweight concretes were discussed. In the model steel rebar diameters and development lengths were used as inputs. The FL model and experimental results, the coefficient of determination R2, the Root Mean Square Error were used as evaluation criteria for comparison. It was concluded that FL was practical method for predicting slippage at maximum tensile strength and slippage at rupture of structural lightweight concretes.