• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.207-210
• /
• 2002

In this paper, We have measured the luminous flux variation of electrodeless fluorescent lamp system reducing a power source to 70% and applying a short interruption caused by the power failure. So we can understood that the protective device for apparatus of power sources is important thing to control electrodeless fluorescent lamp system.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.29-31
• /
• 2008

For rapid and precise design of lighting, lighting simulation programs are used. For determining the precision of the calculation results of the lighting simulation programs, the illuminance of the specific points are calculated analytically and are compared with the results of the programs by using light sources which have known LDC.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.1
• /
• pp.109-113
• /
• 2011

This paper analyzes the noise sources of an LED lighting module with TRIAC dimming control and proposes an improved EMI filter design for the reduction of conducted noise emission. TRIAC dimming invokes problems of input oscillation and capacitor overvoltage at the lighting module. The proposed double LC filter reduces high noise level from the circuit. The experimental and simulation results show that this approach can make significant contributions to the reduction of conducted noise emission from an LED lighting module with TRIAC dimming control.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.6
• /
• pp.70-76
• /
• 2016

Commercialization of surface lighting using Light Emitting Diodes (LED) has embraced the advance to Organic Light Emitting Diode (OLED) technology. This is necessary to achieve light-efficiency-improvement and longer component life. The range of application of LED lighting for both interior and outdoor lights has been gradually expanding. Automobiles and home appliances are now included. In the case of LED surface lighting in a domestic refrigerator, achieving high efficiency requires optimization of the number of LEDs in a pack. Optimization is also required in the design stage of development with regard to the conversion of the light source type from point light sources to the surface light type. This paper addresses these design problems. It presents a study of brightness variations for design solutions that differ from the existing technology in both the number of LED packages and use of Light Gathering Power (LGP) information. The intention is to facilitate production of high brightness LED surface lighting for domestic refrigerators.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.181-187
• /
• 2015

In this study, an LED emotional lighting algorithm optimized to the situation was implemented using fuzzy inference for users in exercise and resting situations in indoor environment. The fuzzy theory was used instead of the conventional simple color temperature control in order to control the colors and color temperatures of LED light sources in line with user environment under complex conditions. An LED emotional lighting system based on fuzzy theory was designed through a combination of colors according to the color and temperature of emotional language based on the user behavior. As a result, the color and color temperature can give a good effect on user's emotions for an emotional lighting that is effective for resting and exercise.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.3
• /
• pp.7-15
• /
• 2013

In lighting design, the calculation of maintenance factor is performed by calculation considering light source, characteristics of luminaire and environmental factors. The method to calculate the current maintenance factor applied to tunnel lighting design takes into consideration only pollution factors in tunnels. In addition, the calculation method should be change in response to changes of tunnel conditions and used light sources. In this study, the calculated factor of the maintenance factor in tunnel is determine by four calculation factors generally applied to the calculation of maintenance factor. This study examined the method of calculating the maintenance factor of tunnel lighting that can be applied according to the installation conditions in designing tunnel lighting by applying the actual installation data of luminaire.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.3
• /
• pp.1-11
• /
• 2015

This study comparatively analyzed the images and preference of lighting space using the emotion-based technique in order to effectively use it in clothing shops and fashion marketing. In terms of color temperature for light sources, 2,800K of lamp color, 6,500K of daylight color and 4,200K of white color were used. For the assessment, sensory evaluation technique was used. Then, the study found the followings: In terms of the image of lighting space by light source, different images were observed by light source with significant difference by the evaluation category. For factor analysis by the evaluation category, 7 factors were extracted. Among them, evaluation on lighting space was influenced by the following three images: modern space, elegant space and classical space. In particular, the modern space comprised of the following adjectives had the biggest effect on the assessment of the image of lighting space ('refreshing,' 'transparent,' 'bluish,' 'bright' and 'non-classical') (primary evaluation 30.13%). According to assessment on the preference of lighting space, the respondents' most favorite lighting space was 4,200K while their least favorable one was 6,500K in terms of color temperature. In terms of preference by the image of lighting space, they didn't like 'non-elegant' and 'non-beige' images even though they had the images of modern space. Therefore, it was confirmed that beige and elegant space images have an effect on the preference of lighting space.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.5
• /
• pp.486-493
• /
• 2024

Lighting has been used for a long time as a medium to convey brightness from darkness, and through incandescent lamps and fluorescent lamps, LED light sources have now become the standard in the lighting industry. Recently, the lighting equipment industry has been undergoing rapid digital transformation, starting with smart lighting, and is evolving into smart lighting customized for individuals and spaces through the development of IoT technology, cloud-based services, and data analysis. However, the blue light emitted from digital devices (computers, smartphones, tablets, etc.) or LED lights stimulates the melanopsin in the optic ganglion cells in the retina of the eye, which in turn stimulates the secretion of melatonin through the pineal gland, which regulates the secretion of melatonin. This can reduce sleep quality or disrupt biological rhythms. This interaction between blue light and melatonin has such a significant impact on human sleep patterns and overall health that it is essential to reduce exposure to blue light, especially in the evening. Human-centered lighting refers to lighting that takes into account the effects of light on the physical and mental areas, such as human activity and awakening, improvement of sleep quality, and health management. Many research institutes study the effects in the visible area and the non-visible area. By studying the impact, it is expected to improve the quality of human life. In this study, we plan to study ways to implement human-centered lighting by collecting sunrise and sunset data and linking commercialized LED packages and control devices with open-source hardware.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.8 no.1
• /
• pp.29-36
• /
• 1994

Exhibitlon lighting design be done after due consideration of the photochemical reaction and heating effcts upon exposure to light In this study the balanced judgement is as follows. 'The most light-susceptible material should be illustrated less than 5O(lx](illumlnance-hours per year: 120,OOOlx.h)and the illuminance of moderately sensitive material is 200(lx] (illuminance hours per year: 480,OOOlx.h). Moreover to minimize damage the sources of light should not only contribute as little as heat possible but remove ultraviolt radiation by filters. Also the sources of light must have good color rendering and low color temperature.

• Journal of Digital Convergence
• /
• v.11 no.4
• /
• pp.229-234
• /
• 2013

The purpose of this study is to develop a lighting apparatus of the illuminance and color temperature to maximize the ability of the optimal combination of light sources that can be controlled efficiently control device. Finding people comfortable feeling for indoor lighting that can be used in a variety of color temperature illumination area by combining light sensitivity can be realized. Lighting apparatus for fluorescent lamps with different color temperature of 2000K and 8000K, and by varying the quantity of each of the fluorescent lamps, the illuminance of lighting equipment and color temperature through optical simulations were evaluated. By infrared remote control receiver, divided into 5 types of relaxation, conversation, meeting, hospitality, arts and the lighting environment you want to transfer the PC0 ~ PC4 through the parallel port on the mode selected by the user at the receiving end the DC voltage output. EEFL inverter input DC voltage and the DC input voltage, depending on the level of EEFL dimming value (illuminance and color temperature) lighting environment you want to create change while using a PIR sensor EEFL automatically turn off if people do not have was developed so that the power consumption so you can save.