• Journal of the Korean Solar Energy Society
• /
• v.32 no.6
• /
• pp.100-105
• /
• 2012

In previous study, to investigate the impression of the compound lighting based on the AC-Model at the full-size room, the impressions of various compound lighting were completed as compared with that of the uniform lightings through the comparison method (a paired comparison) by Semantic Differential scaling. Also, we examined the effect of the supplementary lighting type increasing the lights at the side of the window and the blind-control lighting type, and they were compared with the existing compound lighting type. In results, pared comparison of the compound lighting and the uniform lighting, indicates that the impression of the compound lighting is generally similar to that of the uniform lighting when there are same ratios of the light from the window. Based on these results, we suggest that the AC-Model might be applied to various conditions. And we also introduce the method for daylighting that it is possible to reduce discomfort glare and to improve visual impressions as the supplementary type and blind-control type on the compound lighting. And it was found that electric power consumption of the compound lighting room was lower than that of the uniform lighting room when as same lighting ratio of the compound lighting and the uniform lighting from the window was provided or there was the lighting distribution simulated to same light ratio from the window. Since the method of the ACModel was described in the experimental condition, additional studies should be performed to determine if this model could be applied to different window configurations, lighting layout and types of a room.

• Korean Institute of Interior Design Journal
• /
• no.1
• /
• pp.72-75
• /
• 1992

Lighting made interior space visible and to recognize space itself. Sp9ace and form are established not themselves , but lighting. and dextrous treatment of natural light accomplished poeteic space. Inflowing of lighting in interior space is main factor to decide space character and image . That was recognized in interior space through many centries. At this point, this study was described for that present inflowing of lighting adapting space character and right method in lighting program. The present study is to present the planning method of the most appropriate and the most rational natural lighting in planing for lighting. Under this premise the followings are made ; I. An introduction , the purpose, the sphere, and the method of this study are stated. II, The present writer studied the general characteristics of natural lighting. III. this author studied the factor of decision on control and representation skill of lighting along the following. IV. Analyzing interior space in which the natural lighting is introduced through some literature and case studies. Physics, psychology, structure, equipment, material. V. The last, the author rearranged the results of this study.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.5
• /
• pp.1-12
• /
• 2015

In this study, we derive an evaluation structure and 18 Valuation vocabulary for the media facade lighting conditions. In addition, this study deduced the applicable elements that could be applied in time of building nightscape lighting design using media facade by conducting affective evaluation. The research results are as follows: It was found that the image axis of "Dynamic, Colorful" showed the lighting change speed was fast with diverse application of lighting color, and its evaluation object applied by general emphasis, vertical emphasis, partial emphasis lighting method was highly assessed. In addition, it was found that "Luxurious, Unusual" axis showed lighting change speed was slow with the application of lighting color in warm hue series, and its evaluation object applied by line lighting, dot lighting, general emphasis lighting methods was highly assessed. Lastly, it was found that "Soft, Secure" image axis showed the lighting change speed was slow with the application of pastel tone lighting color, and the evaluation object applied by general emphasis lighting method was highly assessed.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.spc3
• /
• pp.199-206
• /
• 2012

The purpose of this study is to understand the change of impression by comparing the uniformity lighting with the compound lighting. In previous study, we proposed a light controlling method to harmonize daylight from a window and artificial lights from a ceiling and obtained the results to support our method. We referred this method as the Adjusted Compound-Lighting Model (AC Model). The experiment is carried out with the scaled-models and mock-up spaces that were supposed to be an office space. One is lit by the uniform lighting and the other by the compound lighting in each experimental space. In order to present varying illuminance distributions, the two variables were used in this study. Subjects were asked to evaluate the point of difference by semantic differential rating on their overall impression after comparing with two rooms. The results showed that the impressions of compound lighting were more positive score than that of uniformity lighting on the items of 'dim-bright', 'dislike-like', 'artificial-natural' and 'closed-open', and that there was no significant difference in impressions between two spaces on other items.

• Korean Institute of Interior Design Journal
• /
• v.23 no.6
• /
• pp.78-86
• /
• 2014

Lighting in indoor space is being changed to system lighting converged with IT technology. Office space lighting with incandescent lamps and fluorescent lamps was completed through overall lighting plan by illumination in most cases, but convergence between LED lighting and IT technology enables the technology of responding to user requirements to be realized. Optical physical quantity suitable for humans and the lighting environment in accordance with user's sensibility, based on space function and user's behavior, would contribute to the improvement of service productivity, energy reduction, and enhancement of emotional satisfaction by providing user optimized lighting solution. Thus, user-customized system lighting guidelines to be applied with integration indicators of optics and sensibility are required. For the design elements required by users, environmental factors, product characteristics, optical characteristics, and sensibility factors are drawn from the design cases for office space and the survey, and the design check list and evaluation indicators are considered to reflect the requirements in the design and requirement indicators to give integrated satisfaction for optics and sensibility are developed. Purpose-centered design method from the user's viewpoint is applied to function-focused design through scenario, and it should be applied flexibly, as the new lightning design method solutions, to the concept design stage of space lighting design and device development. This paper, therefore, presents user-customized guidelines by pursuing the optics and sensibility evaluation and design method combining the requirement conditions and scenario, to be used for lighting content development and design.

• 한국태양에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.136-141
• /
• 2009

Considerable part of energy consumption is occurred by through buildings. Especially, Lighting energy consumption is most part of one in building. There is very various ways and systems for saving lighting energy. In method, It can be divided Passive Daylighting System and Active Daylighting System. Louver, Screen and use of window's character is representative ways of passive system. Reflection mirror, optical pipe and optical fiber is representative method of active system. Introducing day light on which place can't be introduced day light by typical method is important advantage of active system. Except introducing day lighting methods, efficient lighting management system can save lighting energy. It called lighting automation system. Representatively, Occupancy-related automation and Brightness-related automation system is that. According to occupancy and introducing daylighting level properly operate lamp's intensity of illumination that can save lots of energy. Though Introducing daylighting method, effective lighting system we can get proper intensity of illuminance level and energy saving.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.11a
• /
• pp.173-178
• /
• 2005

Outdoor lighting is an important factor of the urban scape. As a night image of the city, outdoor lighting acts important roles. Cities of developed countries have already had there own night images. Regarding this, government encourages outdoor lighting of building by various ways to building owners. However, in present, owners of private buildings have not been up and coming about outdoor lighting more than those of public buildings in our country. From this point of view, this paper suggests a quantification method for economic effects of outdoor lighting and analyzes economic effects of outdoor lighting in advertising. A suggested measurement method of economic effects is difficult to measure all economic effects of outdoor lighting. Therefore, this measurement method limits the target to the private buildings.

• Science of Emotion and Sensibility
• /
• v.15 no.3
• /
• pp.381-388
• /
• 2012

The purpose of this study is to check if LED lighting can be used as general lighting and examine the color rendering property of full color RGB LED lighting. CRI is one of the important properties of evaluating lighting. However the present CRI does not fully evaluate LED lightings. Firstly, the performance of a simple task was compared other than comparing CRI values for different lighting. For experimental preparation three types of lightings were used; standard D65 fluorescent tube, general household fluorescent tube, and RGB LED lighting. All three lightings show high error for Purple-Red. All three lightings show similar error for all hues and prove that color discrimination is not affected by the lighting. This proves that LED could be used as general lighting. Secondly, problems of the conventional CIE CRI method are considered and new models are suggested for the new lighting source. Each of the models was evaluated with visual experiment results obtained by the white light matching experiment. The suggested model is based on the CIE CRI method but replaces the color space model by CIELAB, color difference model by CIEDE2000, and chromatic adaptation model by CAT02.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.9
• /
• pp.1-9
• /
• 2015

The aim of this study is to deduce color temperature and illuminance by conducting the preference & affective evaluation consequent on illuminance change of ambient light in case of the lighting method of ambient light mixed with task light in time of reading which is visual work action among the action in learning space. As a result of the prior survey on preferred lighting method in time of the act of reading targeting 20 experts before doing evaluation, the method of lighting mixed with ambient light and task light was found to be the highest. Such a result is analyzed to be attributable to the fact that the less the difference in illuminance of nearby space and work surface because of the mixed method of lighting, the less the glare, which makes a reader feels easy and concentrate on reading. On the basis of descriptive statistics of evaluation results and impact analysis by category, this study recommends the application of combinations of ambient light illuminance ranging from 40lx to 100lx with color temperature of 5500~6000K in case of the method of lighting mixed with general light and task light.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.7
• /
• pp.1-7
• /
• 2013

LED lamps are appropriate to the light source for use in broadcasting lighting. When the lighting frequency of LED lamp is different from the shutter frequency of camera, however, the flicker appears on the moving image which is taken by the camera under the dimmed light of LED lamp with conventional dimming methods. In this study, a new dimming method for the LED lamps used as the broadcasting lighting is proposed to minimize the flicker. A lighting period in the proposed dimming method is divided into the several sub-periods which have weight of the bits. Also, the proposed dimming method has characteristics that are optimizing the turn-on timings of two LED lamps to reduce the turn-off periods of the lamps and not to overlap the turn-on periods of the lamps. In the experiments, the incidence of the flicker is taken by the camera under several lighting conditions of the conventional dimming methods and the proposed dimming method. In addition, the brightness values of the frames are obtained in the moving image, and incidence of the flicker is evaluated and compared with conventional methods. From the results, the incidence of the flicker in the proposed method is more improved than the conventional methods.