• Horticultural Science & Technology
• /
• v.31 no.4
• /
• pp.400-406
• /
• 2013

This study was conducted to investigate the growth and flowering of African marigold (Tagetes erecta L.) and salvia (Salvia splendens F. Sello ex Ruem & Schult.) seedlings before and after storage under fluorescent lamps and green LED radiation conditions with different light intensities during storage. The both seedlings were kept under a storage room controlled at $8^{\circ}C$ air temperature and $40{\pm}10%$ relative humidity conditions. Light intensities were maintained at 15 and $30{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ during storage. In lighting treatments, dry weight of African marigold at 28 days after storage was not significantly different, and decreased approximately 29% compared to pre-storage under dark treatment. There was no significant difference in the leaf area of salvia seedlings stored under dark condition compared to before storage, but the leaf area under green light radiation with higher light intensity (treatment GH) was two times greater than before storage. The survival rate after transplanting of African marigold stored under dark condition was 10%, and days to flowering increased compared to those stored under fluorescent and green light with higher light intensity (treatment FLH, GH). Comparing to before storage, growth and flowering of the both seedlings after storage were significantly promoted by the light exposure during storage. The present experimental results show that the light intensity should be decided to maintain minimum growth during lighting storage and storage quality of the seedlings such as flowering promotion and extended blooming period after lighting treatment during storage period from the above results.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.2
• /
• pp.225-230
• /
• 2011

This paper depict the system which reacts staly towards light changes, when object is detected using retinex. Previous interaction system does not react to transient light conditions. Since non-lighting condition was constructed in the limited space. However, if interaction contents work in the inside where the light changes, the light input is changed as the time goes by when the system detect objects with super sensitive camera few lighting transients makes system trouble. Thus, lighting is one of the most significant factors of the system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.4
• /
• pp.75-81
• /
• 2012

In this study, vibration characteristics in according to the load type of cast resin transformer using vibration measurement device were compared. Measurement conditions are the same installation and operation of the three-phase cast resin transformer. If the load increases in transformer using the rotating machinery, the frequency is growing. In the transformer using the lighting and heating loads, it's detected the 55 [${\mu}m/s$] in or outside and 120 [${\mu}m/s$] or more at 60[Hz], the 30 [${\mu}m/s$] in or outside at 120[Hz], and the 70 [${\mu}m/s$] in or outside at 420[Hz]. When increases the loads, it's appeared the 60 [${\mu}m/s$] or less at 450[Hz] or more in rotating machinery, but the velocity of lighting and lighting loads are appeared from 5[${\mu}m/s$] to 115[${\mu}m/s$] inside the 420[Hz] in the same load condition of 20[%]. Through this study, it's verified that there are differences the internal vibration in according to the type of load in cast resin transformer.

• Journal of Surface Science and Engineering
• /
• v.55 no.3
• /
• pp.173-179
• /
• 2022

This study presents a roll-to-roll process which is capable of Ag nanowire (AgNW) transfer from polyethylene terephthalate (PET) film to polycarbonate (PC) film. We developed a roll-to-roll machine that consists of two film suppliers, a coater of photo-curable resin, a film laminator, an ultraviolet (UV) exposure unit, and a film winder to facilitate large-area electrode transfer between different flexible substates. Using the process, optimal fabrication condition was investigated by parametric experiments in terms of the UV exposure time, number of thermal cycling, and exposure time of high temperature and humidity. A fabricated AgNW on PC film showed sheet resistance of 52 Ω/sq and optical transmittance of approximately 80 % over a range of visible light.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.80-83
• /
• 2001

As a LCD monitor is larger and thinner, a Cold Cathode Fluorescent Lamp (CCFL) for backlight in LCD monitor gradually becomes longer and thinner. The backlight of a large LCD monitor, however, has a limitation in its brightness. In this study, a parallel multi-lamp is used in order to supply enough brightness. Though the CCFLs are made through a detail and equal manufacturing process, they don't have exactly the same features individually in their brightness, frequency, voltage and current. Consequently, it is difficult to have equal brightness at an early lighting condition or during lighting time. In this paper, a parallel multi-lamp which can have the same output under the same condition is designed. For this, 18 inch LCD monitor with four lamps is used. An inverter for multi-lamp driving is also used in this study. The newly designed inverter shows more than $90\%$ efficiency in its brightness input and output. Besides, it is also available for a multi-drive of other lamps.

• Journal of Korean Public Health Nursing
• /
• v.16 no.1
• /
• pp.190-200
• /
• 2002

This study was carried out to investigate and analyze TSP of the PC rooms. The concentration of the total suspended particulate and heavy metals contained in the total suspended particulate of the 15 PC rooms located in one local city were measured. The statistical correlation coefficients between the total suspended particulate and factors of the indoor condition (number of fan or size of pc room, illumination), between the heavy metals and factors of the indoor condition were studied. The results are as follows: 1. The factors of the indoor condition of the 15 PC rooms are as follows. Average illumination was 24 luxes. Average number of computers installed were 37. Average number of the fans was 7. and the size of investigated PC rooms was $139.94m^2$. 2. The mean age of the subjects was 21.8 years old. they $(51.5\%)$ used the 15 pc rooms for fewer than 2 hours per one day. 3. The mean concentration of total suspended particulate (TSP) is lower in the evening ${139.085\;(2.462)\;{\mu}g/m^3}$ than the night ${166.216(2.609){\mu}g/m^3}$. 4. The mean concentration of total suspended particulate was industrial work area) residential area) commercial area. 5. The distribution of heavy metals were indicated as Zn>Cr>Pb>Cd in the indoor air at PC rooms. and the concentration rate of Zn was the highest among heavy metals. but this increase didn't show any relationship with many factors of indoor condition (number of fan or size of pc room, lighting) 6. The concentration of TSP & heavy metals didn't have any relationship between the factors of indoor environment (number of fans, size of pc room, lighting).

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.1
• /
• pp.142-156
• /
• 2011

This study aims to suggest improvements in night landscape lighting of Bomun Lake, a representative waterfront landscape in Gyeongju which is the city designated as UNESCO World Heritage in December 2000. This study divided the area into three types of sections-that is, road section, walking section, and landscape section- based on the present condition of land use and users of the Bomun Lake area. In addition, this study classified the lightingtypes by section into nine lighting types-that is, road, crossroad, parking lot, pedestrian passage, trail, sculpture, tree, waterfront deck-by comparing them to the park lighting types suggested by the KS A illuminance standards, and examined the problems of the current Bomun Lake lighting base on the standards. By using this as basic data, this study established relevant plans and collected research material. This study suggested directions of each of the three sections and improvements in illuminance, color temperature, creating methods of each of the nine lighting types to the night Lighting planning of the Bomun Lake area reflecting the landscape characteristics of Gyeongju, a historical, cultural city.

• Journal of Energy Engineering
• /
• v.24 no.3
• /
• pp.115-121
• /
• 2015

This paper presents the introduction plan of the renewable energy in innovation city. The introduction plan to make the condition of innovation city best should consider the economical efficiency, the quality of life and the sustainable development. The design of balanced city is demanded to build environment friendly and sustainable city. Energy efficient buildings should be designed to deal with the energy efficiency and environment problem. Therefore, in this paper, we analyze the energy efficiency and provide the method to introduce the renewable energy system, in various buildings. As a result, the renewable energy plans of each innovation city are suggested and analyzed.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.92-96
• /
• 2007

Architecture design has need of daylight prediction to utilize daylight efficiently. But it is difficult to predict the exact value of available daylight in buildings. Using various lighting simulation software is not difficulty, but we can find different results under the same conditions. The purpose of this paper is to compare simulation values from various software such as Lumen-micro 2000, Lightscape 3.2, and Relux 2006. The same space and parameters of daylight(location of space and window, date, time, and skylight condition) are considered to conduct various simulation conditions.

• Journal of the Korea Furniture Society
• /
• v.24 no.3
• /
• pp.286-292
• /
• 2013

Space given at home, furniture is an important condition to determine its size. As a method for satisfying outer and functional human needs, ever changing, shaped form has also been developed. Modern people tend to decorate the beautiful living space to the needs of the beauty and space of living. In order to satisfy these requirements, the development of furniture to suit the taste of modern people is required. In this study, we add together the design and contemporary design of traditional Korean and use of raw wood can feel the natural and applied to furniture retro design. It is possible to have a motif characteristic of Hanok traditional to suggest a design where you can feel the sensitivity with retro in the direction of the current design change is large and diverse, and in harmony with the living space of modern it is an object that you study the production lighting and storage furniture with the complexity of the traditional and modern.