• Bulletin of the Korean Chemical Society
• /
• v.35 no.4
• /
• pp.1165-1168
• /
• 2014

We prepared dye-sensitized solar cells (DSSCs) with enhanced energy conversion efficiency using open-ended $TiO_2$ nanotube arrays with a $TiO_2$ scattering layer. As compared to closed-ended $TiO_2$ nanotube arrays, the energy conversion efficiency of the open-ended $TiO_2$ nanotube arrays was increased from 5.63% to 5.92%, which is an enhancement of 5.15%. With the $TiO_2$ scattering layer, the energy conversion efficiency was increased from 5.92% to 6.53%, which is an enhancement of 10.30%. After treating the open-ended $TiO_2$ nanotube arrays with $TiCl_4$, the energy conversion efficiency was increased from 6.53% to 6.89%, a 5.51% enhancement, which is attributed to improved light harvesting and increased dye adsorption.

• Journal of Ginseng Research
• /
• v.19 no.3
• /
• pp.275-280
• /
• 1995

The formation of thylakoid membrane proteins and changes in the chloroplast ultrastructure of ginseng leaf were investigated as a function of time following the leaf emergence. The leaf chloroplast obtained just after the leaf emergence showed short rod-like thylakoids which were connected and arranged in 3~4 layers along the longitudinal axis of the chloroplast. The 10 DAE (days after emergence) chloroplast started to form grana structure. The typical grana structure was observed 17 DAE, and the grana was fully developed 28 DAE. The membrane proteins obtained from just after emerging leaf were separated into many minor bands indicating no CP-complex formation yet. LHC II was detected after 10 days. CP 47 and CP 43 were detected after 17 days. After 28 days, the PS I and PS II proteins were distinctly separated into CP 1, LHC II, CP 47, CP 43, CP 29, CP 27+24. Thus, the appearance of the light harvesting protein, LHC II, which was concentrated in grana stacks, was consis tent in time with the formation of grana stacks 17 DAE. Key words Chloroplast ultrastructure, grana, CP-complex, LHC II.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.2
• /
• pp.373-377
• /
• 2007

No phosphatidylcholine (PC) was detected in the membrane of Rhodobacter sphaeroides pmtA mutant (PmtAl) lacking phosphatidylethanolamine (PE) N-methyltransferase, whereas PE in the mutant was increased up to the mole % comparable to the combined level of PE and PC of wild type. Neither the fatty acid composition nor the fluidity of membrane was altered by pmtA mutation. Consistently, aerobic and photoheterotrophic growth of PmtAl were not different from wild type. However, PmtAl showed an extended lag phase (15 h) after the growth transition from aerobic to photoheterotrophic conditions, indicating the PC requirement for the efficient formation of intracytoplasmic membrane (ICM). Interestingly, the B800-850 complex of PmtAl was decreased more than twofold in comparison with wild type, whereas the level of the B875 complex comprising the fixed photosynthetic unit was not changed. Since puc expression is not affected by pmtA mutation, PC appears to be required for the proper formation of the B800-850 complex in the ICM of R. sphaeroides.

• Journal of Photoscience
• /
• v.2 no.1
• /
• pp.19-25
• /
• 1995

Picosecond time-resolved and static protein fluorescence spectra and absorption spectra of octopus rhodopsin, a photorecepting protein, are measured and compared with those of bacteriorhodopsin, a photon-induced proton pumping protein, to understand the protein conformations and functions of octopus rhodopsin and its deprotonated photocycle intermediate. The bluer and weaker absorption of retinal indicates that octopus rhodopsin is better in thermal noise suppression but less efficient in light harvesting than bacteriorhodopsin. The protein fluorescence of octopus rhodopsin shows the characteristic of Trp only and the uantum efficiency and lifetime variations may result primarily from variations in the coupling strength with the retinal. The stronger intensity by four times and larger red shift by 12 nm of fluorescence suggest that octopus rhodopsin has more open and looser structure compared with bacteriorhodopsin. Fluorescence decay profiles reveal two decay components of 300 ps (60%) and 2 ns (40%). The deprotonation of protonated Schiff's base increases the shorter decay time to 500 ps and enhances the fluorescence intensity by 20%. The fluorescence and its decay time from Trp residues near retinal are influenced more by the deprotonation. The increase of fluorescence intimates that protein structure becomes loosened and relaxed further by the deprotonation of protonated Schiff's base. The driving force of sequential changes initiated by absorption of a photon is too exhausted after the deprotonation to return the intermediate to the ground state of the begun rhodopsin form.

• Current Photovoltaic Research
• /
• v.10 no.2
• /
• pp.49-55
• /
• 2022

With rapid growth in light-harvesting efficiency from 3.8 to 25.8%, organic-inorganic hybrid perovskite solar cells (PSCs) have attracted great attention as promising photovoltaic devices. However, despite of their outstanding performance, the commercialization of PSCs has been suffered from severe stability issues, especially for UV and humidity: (i) UV irradiation towards PSCs is able to lead UV-induced decomposition of perovskite films or catalytic reactions of charge-transporting layers, and (ii) exposure to surrounding humidity causes irreversible hydration of perovskite layers by the penetration of water molecules, resulting considerable decrease in their power-conversion efficiency (PCE). This review investigates current status of strategies to enhance UV and humidity stability of PSCs in terms of UV-management and moisture protection, respectively. Furthermore, the multifunctional approach to increase long-term stability as well as performance is discussed as advanced research directions for the commercialization of PSCs.

• Current Photovoltaic Research
• /
• v.11 no.1
• /
• pp.18-26
• /
• 2023

Tin perovskite solar cells have attracted a lot of attention due to their potential to address the toxicity of lead, which is the biggest barrier to commercialization of perovskite solar cells. Unlike other lead-free perovskite, tin perovskite have a direct bandgap, which is suitable for use as light harvesting, and relatively good stability, which has led to a lot of attention. Since the first tin perovskite solar cell was reported in 2014, it has achieved an impressive power conversion efficiency of 14.81%. However, this efficiency is still low compared to that of lead perovskite solar cells, and the stability of tin perovskite solar cells is also an issue that needs to be addressed. In this review, we will discuss the basic properties of the tin atom in comparison to the lead atom, and then discuss the crystal structure, phase transition, and basic properties of tin perovskite. We will then discuss the advantages, applications, challenges, and strategies of tin perovskite, In particular, we will focus on how to prevent the oxidation of tin, which is arguably the biggest challenge for using tin perovskite solar cells. At the end, we summarize the key factors that need to be addressed for higher efficiency and stability, emphasizing what is needed to commercialize tin perovskite solar cells.

• Microbiology and Biotechnology Letters
• /
• v.52 no.2
• /
• pp.114-121
• /
• 2024

The present communication deals with the standardization of suitable medium formulation along with anaerobically digested cow's urine (ADCU) for growth of Spirulina subsalsa. Growth was evaluated on the basis of photosynthetic and non-photosynthetic pigment. The results obtained from the study indicated that, SSM-1 and SSM-2 media are suitable for maximum synthesis of chlorophyll-α and carotenoids. The obtained results also indicated that SSM-5 medium is suitable for maximum synthesis of accessory light harvesting pigments phycobiliprotein, total carbohydrate, total protein and total lipid in S. subsalsa. From the study it could be concluded that all the five media combinations (viz. SSM-1, SSM-2, SSM-3, SSM-4 and SSM-5) would be suitable for mass cultivation of S. subsalsa. But among them, SSM-5 medium combination could be the most suitable medium.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.22 no.3
• /
• pp.143-154
• /
• 2016

The purpose of this study was investigated the quality changes before and after harvesting, storage and, processing of onion. Experiments were carried out to compare the effect on the characteristics of the postharvest from preharvest factors using onion. This experiment had identified the characteristics of harvested onions after cultivating with several preharvest factors such as the light and water conditions. These tests were conducted in an onion growth in the field, storage, and processing of fresh-cut during a laboratory periods of 2 years. In first year, onion cultivars ('Kars' and 'Pop') were produced under stable or unstable environment conditions, these onions were stored at low temperature(0?). Measurement was evaluated by the growth amount after harvesting, and the fresh weight loss and respiration rate during storage. According to different culture conditions and storage temperatures, it was investigated the properties of the fresh-cut onion. Growth of onion was varied depending on the cultivars and culture conditions. The amount of growth on 'Kars' and 'Pop' onions were decreased by excessive soil water conditions with shading. These influences were found the morphological differences resulting for the cell tissue of onion being rough and large. Onion cultivated in excessive soil water with shading affected the degree of its respiration rate and fresh weight loss during storage. Ones in excessive soil water with shading were higher than the control in fresh weight loss and respiration rate, respectively. However fresh-cut onion could not investigated to clarify the difference due to effects of cultivation condition and storage temperature on some measure items such as electrolyte leakage and microbial number change. There was a change of only electrolyte leakage depending on the storage temperature, rather than cultivated conditions before harvesting factor. The results showed that the onion grown on in the good environment was represented to a good quality produce even after harvesting.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.4
• /
• pp.355-362
• /
• 1999

This experiment was conducted to evaluated the effect of maturity at harvest and wrap colors on the quality of round baled rye(Secal cereale L.) silage at the forage experimental field, Grassland and Forage Crops Division, National Livestock Research Institute, Suwon in 1998. The experiment was consist of split-plot design with three repications. The main plots were three different harvesting stages : boot, heading, and flowering stages, the subplots were wrap colors : white, black, and light green color. Acid detergent fiber(ADF) and neutral detergent fiber(NDF) of rye silage were increased with delayed harvesting date, but there were no significant differdence among wrap colors. However, average in vitro dry matter digestibility (IVDMD) of rye silage with white color wrap tended to have higher than those of other colors. The silage pH of heading stage was highest (5.12), and that of flowering stage was lowest (4.57) in different harvest stages. Among tested wrap colors, white color wrap resulted on lowest pH than others (p<0.05), but there were no significant difference between black and light green color. Dry matter (DM) content of rye silage were increased as harvest stage progressed (p<0.05). However, DM content of white color was highest among warp colors, but there was signifiant difference (p<0.05). Ammonia-N content of silage harvested at boot stage was the highest in harvest stage, but there was no difference between heading and flowering stages. Among wrap colors tested, ammonia-N content of black color was highest, but there was no significant difference. The number of lactic acid bacteria of white colors was highest in different colors, and that of flowering stage was highest among harvest stage. Acetic and butyric acid contents were decreased as harvest stage progressed, and lactic acid was increased from 6.33 to 7.98%. However, wrap colors did not influence lactic acid concentration. Among different wrap colors, outside temperature of rye silage was affected by air temperature, but effect of inside temperature was minimal. Black color wrap increased inside temperature by $3{\sim}5^{\circ}C$. The results of this study indicate that rye should be harvested for round bale silage after heading stage. The quality of rye silage wrapped white and light green color will increase slightly.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.115-116
• /
• 2012

The demand for flexible electronic systems such as wearable computers, E-paper, and flexible displays has increased due to their advantages of excellent portability, conformal contact with curved surfaces, light weight, and human friendly interfaces over present rigid electronic systems. This seminar introduces three recent progresses that can extend the application of high performance flexible inorganic electronics. The first part of this seminar will introduce a RRAM with a one transistor-one memristor (1T-1M) arrays on flexible substrates. Flexible memory is an essential part of electronics for data processing, storage, and radio frequency (RF) communication and thus a key element to realize such flexible electronic systems. Although several emerging memory technologies, including resistive switching memory, have been proposed, the cell-to-cell interference issue has to be overcome for flexible and high performance nonvolatile memory applications. The cell-to-cell interference between neighbouring memory cells occurs due to leakage current paths through adjacent low resistance state cells and induces not only unnecessary power consumption but also a misreading problem, a fatal obstacle in memory operation. To fabricate a fully functional flexible memory and prevent these unwanted effects, we integrated high performance flexible single crystal silicon transistors with an amorphous titanium oxide (a-TiO2) based memristor to control the logic state of memory. The $8{\times}8$ NOR type 1T-1M RRAM demonstrated the first random access memory operation on flexible substrates by controlling each memory unit cell independently. The second part of the seminar will discuss the flexible GaN LED on LCP substrates for implantable biosensor. Inorganic III-V light emitting diodes (LEDs) have superior characteristics, such as long-term stability, high efficiency, and strong brightness compared to conventional incandescent lamps and OLED. However, due to the brittle property of bulk inorganic semiconductor materials, III-V LED limits its applications in the field of high performance flexible electronics. This seminar introduces the first flexible and implantable GaN LED on plastic substrates that is transferred from bulk GaN on Si substrates. The superb properties of the flexible GaN thin film in terms of its wide band gap and high efficiency enable the dramatic extension of not only consumer electronic applications but also the biosensing scale. The flexible white LEDs are demonstrated for the feasibility of using a white light source for future flexible BLU devices. Finally a water-resist and a biocompatible PTFE-coated flexible LED biosensor can detect PSA at a detection limit of 1 ng/mL. These results show that the nitride-based flexible LED can be used as the future flexible display technology and a type of implantable LED biosensor for a therapy tool. The final part of this seminar will introduce a highly efficient and printable BaTiO3 thin film nanogenerator on plastic substrates. Energy harvesting technologies converting external biomechanical energy sources (such as heart beat, blood flow, muscle stretching and animal movements) into electrical energy is recently a highly demanding issue in the materials science community. Herein, we describe procedure suitable for generating and printing a lead-free microstructured BaTiO3 thin film nanogenerator on plastic substrates to overcome limitations appeared in conventional flexible ferroelectric devices. Flexible BaTiO3 thin film nanogenerator was fabricated and the piezoelectric properties and mechanically stability of ferroelectric devices were characterized. From the results, we demonstrate the highly efficient and stable performance of BaTiO3 thin film nanogenerator.