• The Research Journal of the Costume Culture
• /
• v.12 no.3
• /
• pp.407-414
• /
• 2004

A natural dye aqueous walnut shell extract was obtained by extraction of walnut shell using water at various conditions in this study. Silk fabrics were dyed at various dyeing and mordanting conditions using walnut shell extract and various mordants (Al, Cu, Fe ions). Studies have been made on the effects of dyeing and mordanting conditions on the dyeing properties and fastness (light, water and dry cleaning fastness) of dyed silk Fabric. The results obtained in this study were as follows;. The dye content in the walnut shell extract increased with increasing extraction temperature to 90℃ and extraction time to 120min, and thereafter the dye content decreased a little. The dry cleaning and water fastness of non-mordanted silk fabrics were better than those of mordanted silk fabrics.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.5 no.3
• /
• pp.15-23
• /
• 2003

Chestnut trees have been used as a dyeing material, which are grow naturally, are cultivated all the area of Korea. So, there is abundant amount of the materials and they have better colorfastness than other natural dyeing materials. But chestnut husk extract is good at silk and wool fabrics, not cotton fabrics. That's why many methods using chestnut extraction for dyeing are being studied. But most of them depend on treatment method with chemical material which doesn't fit with the aim, using natural materials. Therefore in this research, we used protein pre-treatment method which is dyeing chestnut husk extract after treating at cotton fabrics with bean sap. And we studied the effect of dyeability of chestnut husk extract to cotton fabrics. As a result of pre-treatment of bean sap at cotton fabrics, dyeability was increased. Besides laundering fastness, dry cleaning fastness, perspiration fastness and light fastness were almost increased.

• Fashion & Textile Research Journal
• /
• v.5 no.5
• /
• pp.545-549
• /
• 2003

Dyeing properties such as migration of disperse dye and color fastness of 4 types of the carrier[Carrier-I(methyl napthalene). Carrier-II(chloro benzene). Carrier-III(aromatic ether) and Carrier-IV(o-phenyl phenol)] were evaluated for the study. For the results, the optimum dyeing time and concentration of the carrier was 30min at $110^{\circ}C$ and 2g/l, respectively. The redyeing ratio of the fabric samples treated with Carrier-II and III was higher than that treated with Carrier-I and IV, thus, if was conclude that the redyeing ratio of the samples treated with Carrier-II and III was excellent. The light fastness of the samples treated with Carrier-III and IV was higher than that of Carrier-I and II in order of 2-4 grades. However, there were little changes in terms of washing and sublimation and rubbing fastness for the samples.

• Textile Coloration and Finishing
• /
• v.3 no.4
• /
• pp.1-6
• /
• 1991

The influence of chemical structure of Benzopurpurine 4B and Congo Red on the color fastness properties of cotton fabric have been studied at $90^{\circ}C$. Each dyeing carried with $10\times10^{-6}M$ of dye concentration and 0.1 M of NaCl. The results obtained from this study were as follow; 1. The properties of fastness to washing by Benzopurpurine 4B were superior to those of Congo Red. 2. The properties of fastness to light by Congo Red were superior to those of Benzopurpurine 4B. 3. The color variation appeared more vividly in the case of Benzopurpurine 4B than Congo Red and the color shifted to Red Purple after washing test but to Yellow Red after Fade-O-meter test.

• Textile Coloration and Finishing
• /
• v.11 no.1
• /
• pp.9-15
• /
• 1999

Using water and methanol, the colorant components were extracted from the heartwood of amor cork tree which is known as the oldest natural yellow dye. The dyeabilities of the colorant on cotton and the fastness of cotton fabrics dyed with amur cork tree extracts were investigated. According to the dye uptake and mordant concentration, antibacterial activities and deodorization properties of dyed fabrics were also investigated. As a results, K/S values of dyed fabrics were increased with concentrations of mordants and amur cork tree extracts. Washing fastness of dyed fabrics was very low, light fastness was fair and the other fastness were good. Deodorization rates of dyed fabrics were increased in proportion to concentrations of amur cork tree extracts. The reduction rates of bacteria measured by Bioassay tests were also increased in proportion to concentrations of mordants and amur cork tree extracts.

• Textile Coloration and Finishing
• /
• v.24 no.1
• /
• pp.1-7
• /
• 2012

Dyeing and fastness characteristics of 100% meta-aramid fiber were investigated with cationic dyes and swelling agents under various dyeing conditions such as dyeing temperature and pH of dye bath. Dye exhaustion started at around $80^{\circ}C$ and settled down at $130^{\circ}C$. Among swelling agents used, N-methyl formanilide showed comparatively higher K/S values comparing to 1-phenoxypropan-2-ol. Under weak acidic conditions in the range pH 5 to 7, the exhaustion of cationic dyes could be enhanced leading to higher adsorption and stability of colorimetric property. Wash and rubbing fastness were generally good but low light fastness found can be attributable to the poor photo-stability of the cationic dyes.

• Textile Coloration and Finishing
• /
• v.26 no.3
• /
• pp.254-262
• /
• 2014

In this study, the colorants of Wisteria floribunda leaf were extracted with water. Silk and wool fabrics have been dyed with the aqueous extract of Wisteria floribunda leaf and their dyeabilities was studied. Additionally the fastness to washing, drycleaning, light and perspiration were also investigated. Silk and wool fabrics dyed with the extract of Wisteria floribunda leaf were colored in yellowish red tint. The optimum dyeing condition of the colorants extracted from Wisteria floribunda leaf was three repeated dyeing at 70, $95^{\circ}C$ for 1hr using post mordanting. For dyed silk and wool fabrics, the fastness to washing was improved by mordanting, and the fastness to drycleaning was very outstanding.

• Textile Coloration and Finishing
• /
• v.13 no.1
• /
• pp.45-54
• /
• 2001

The Purpose of this studs was to investigate dyeing properties of silk and nylon fabrics by Polygonum cuspidatum extract. The properties were evaluated by it's extracting condition, dyeing condition, mordants variables, methods of mordanting and color fastness. Silk fabric showed the highest K/S value at $50-70^\circ{C}$, while Nylon fabric showed at $90^\circ{C}$. Surface color of dyed fabrics were various by the used mordants ; none-, and Al-mordanted fabrics were yellow, Cu-mordanted fabrics were redish yellow, Fe-mordanted fabrics were olive green. Fe-mordanted silk fabrics showed excellent laundering fastness and light fastness. Both silk and nylon fabric showed excellent laundering and dry cleaning fastness.

• Fashion & Textile Research Journal
• /
• v.3 no.4
• /
• pp.344-350
• /
• 2001

Wool fabrics were treated with dichloro isocyanuric acid (DCCA) and dyed with acid dyes (C.I. Acid Red 18), and then, they were treated by sputter etching. Wool fabrics had been sputtered with aluminium under various conditions such as sputter etching time and discharge power in the presence of argon gas. We compared mechanical properties, colour difference and fastness properties of these samples one another: Mechanical properties and colour difference of sputtered wool fabrics changed by sputter etching time, discharge power and DCCA concentration. Light fastness showed a rising tendency but rubbing fastness showed a downward tendency when sputter etching time was 7 minutes.

• Textile Coloration and Finishing
• /
• v.31 no.2
• /
• pp.98-106
• /
• 2019

The dyeability and fastness properties of super-hydrophobic navy dyes having different length of alkyl groups were investigated on ultra high molecular weight polyethylene fabrics. Those dyes exhibited strong color strength in the wavelength of mainly 550~650nm, which meant that they were navy color. From the results accomplished under various dyeing conditions, it can be concluded that those dyes have higher affinity on the fibers at $130^{\circ}C$ than at the lower dyeing temperature. Considering processing time and thermal damage of the fibers, one hour is good enough to obtain full strength of color. Maximum color strength was obtained at 2~3%owf of pure dyes. Except for the rub fastness under dry condition, all fastness such as to washing and light showed as good as of 4~5 ratings.