• 한국위성정보통신학회논문지
• /
• 제10권1호
• /
• pp.62-66
• /
• 2015

본 논문은 디지털 사이니지의 다양한 콘텐츠 유형과 활용범위에 대하여 소개하고 송수신 거리를 늘리기 위하여 기존의 통신 방식을 분석하였다. 디지털 사이니지를 장거리에서 구현하기 위하여 기존의 모듈레이션 기법들을 결합한 하이브리드 모듈레이션 기법을 제안하고 성능을 분석하였다. 그리고 실제 채널에서의 성능을 검증하기 위해 USRP 장비를 이용하여 심벌을 매핑하고 가시광 통신 송수신 모듈로 데이터를 송수신하는 실험을 수행하였다. 기존의 QAM 방식을 이용한 데이터 수신거리와 송수신 파워를 실험을 통하여 확인하였다. 제안된 하이브리드 모듈레이션 기법을 이용한 데이터 수신거리와 송수신 파워가 기존 QAM 방식보다 뛰어남을 보였다.

• 전자공학회논문지A
• /
• 제33A권7호
• /
• pp.1-14
• /
• 1996

Effects of the external optical feedback on the optical transmission characteristics were evaluated for 3 kinds of commercialized DFB-LD modules for 2.5Gbps optical communication systems. As a result, intensity noise induced by external optical feedback via generating the external cavity modes deteriorated the transmission performances of sthe DFB-LD modules as much as 1.5dB, 1.2dB, and 1.0dB for the maximum feedback ratio of -8.8dB which corresponds to the worst reflection along the fiber transmission line. Additional penalty of 0.5dB was occurrred when state of polarization of feedback light was adjusted. From the experiments evaluating the isolation ratio of the single polarization optical isolator, decrease of the polarization dependent isolation ratio as much as 10dB from that of specification and the effective isolation ratio as much as 20dB from that of specification was mjor cause of high sensitivity of DFB-LD modules to external feedback. It was suggested that polarization independent optical isolator or single polarization optical isolator with isolation ratio specification of more than 40dB is required for 2.5Gbps DFB-LD modules with complete suppression of external feedback effects.

• 전기전자학회논문지
• /
• 제21권2호
• /
• pp.115-122
• /
• 2017

In vehicular safety service, every vehicle broadcasts Basic Safety Message (BSM) periodically to inform neighbor vehicles of host vehicle information. However, this can cause network congestion in a region that is crowded with vehicles resulting in a reduction in the message delivery ratio and an increase in the end-to-end delay. Therefore, it could destabilize the vehicular safety service system. In this paper, in order to improve the congestion control and to consider the hidden node problem, we propose a congestion control scheme using entire network congestion level estimation combined with transmission power control, data rate control and time slot based transmission control algorithm. The performance of this scheme is evaluated using a Qualnet network simulator. The simulation result shows that our scheme mitigates network congestion in heavy traffic cases and enhances network capacity in light traffic cases, so that packet error rate is perfectly within 10% and entire network load level is maintained within 60~70%. Thus, it can be concluded that the proposed congestion control scheme has quite good performance.

• 한국통신학회논문지
• /
• 제29권7A호
• /
• pp.719-726
• /
• 2004

광섬유의 분산이 균일하지 않다는 가정 하에 색 분산과 자기 위상 변조 (SPM : Self Phase Modulation) 현상에 의해 왜곡된 WDM 채널의 보상 특성을 수치적으로 살펴보았다. 본 연구에서 사용한 보상 기법은 전체 전송 링크 중간에 광 위상 공액기 (OPC： Optical Phase Conjugator)를 두어 보상하는 MSSI (Mid-Span Spectral Inversion)이다. OPC를 중심으로 두 광섬유 구간의 분산 계수 분포가 변동하면서 서로 일치하지 않은 경우에도 전송 채널의 입력 전력을 적절히 조절함으로써 MSSI를 통해 장거리 전송이 가능하다는 것을 알 수 있었다. 즉 장거리 WDM 시스템에 MSSI를 적용하게 되면 전송 선로 곳곳에 필요한 보상기(compensator) 등을 없앨 수 있고, 결과적으로 시스템 비용을 절감할 수 있을 것으로 기대된다.

• 전기의세계
• /
• 제18권1호
• /
• pp.24-29
• /
• 1969

This is preliminary study concerning the future construction and operation of 345KV power transmission line in Korea which will be added to the existing 161KV power system by the end of 1970 in order to increase the power carrying capacity between Seoul and Pusan area; 350 kilo meters aparts, in accordance with the ambitious second five years power development schedule of Korea Electric Company. The result of this study says that an intermidiate switching station should be installed at the middle position of the line to improve the transient stability of the system, considerable amount of capacitors or synchronous condenser are to be installed to reduce the voltage drop at receving end of line during the heavy load hours, and also in some measure to avoid the voltage rise by self-excitation of power generators during the light load hours and while energizing the line. This is the first attempt to realize the EHV power transmission line in Korea so that the additional study is necessary on the kind and size of conductors, the necessary number of insulators and the suitable clearance distances between conductor and steel tower or earth from the technical and economical view points. These are necessary steps to be taken by the writer before getting into the calculation on the transient stablity of the power system.

• 한국정보통신학회논문지
• /
• 제8권7호
• /
• pp.1576-1580
• /
• 2004

최근 정보통신의 흐름은 사용자의 다양한 정보 욕구를 만족시키기 위한 통신 서비스의 개발에 주력하고 있다. 근거리망의 통신에 광송신 모듈은 850nm, 1310nm의 파장대역을 사용하며, 광원의 구조는 LD를 사용하였지만, 장파장 및 Gbps급에서는 데이터 처리 능력이 뛰어난 수직공진형 표면발광 레이저(Vertical Cavity Surface Emitting Laser : VCSEL)을 많이 사용한다. 본 연구에서는 기본적인 광특성을 분석한 후 GHz급 이상에서 동작이 가능하도록 광전송 모듈을 개발하고 펄스 패턴 발생구를 이용하여 2.5GHz, 3GHz에서의 전송 특성을 분석하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.899-901
• /
• 2009

The magnesium fluoride ($MgF_2$) has very higher optical transmission than oxide or nitride material applied for gas barrier, so we manufactured Mg-Zn-F films with Mg-Zn-F target mixed in the various ratio of $MgF_2$ to Zn and characterized films' properties. Zn is used to increase packing density of barrier film. Thickness and optical transmission of Mg-Zn-F are 200 nm and over 90 %, respectively. The result of water vapor transmission rate at 38, RH 90 ~ 100% of the Mg-Zn-F film deposited with 4 : 6 ($MgF_2$ : Zn) ratio target reached below $1{\times}10^{-3}g$/($m^2{\cdot}day$), measuring limit of instrument.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.119-122
• /
• 2000

Recently polymer insulators are being used for outdoor high voltage applications. Polymer insulators for transmission line have significant advantages over porcelain and glass insulators, especially for ultra-high voltage transmission lines. Their advantages are light weight, vandalism resistance and hydrophobicity. Polymer insulators are a relatively new technology, but their expected life is still unknown. Therefore these estimating technique are very important. Their life time is related to weathering and operating condition. Multi-aging test is requested because aging factor is occurred by multi-aging than unique aging. The aging test about polymer insulators have mainly carried out by IEC 61109. This paper presents multi-stress chamber experiments and tracking wheel test to examine the tracking and erosion performance of polymer insulator for transmission. Multi-stress testing is able to demonstrate deficiencies of polymer insulator materials and designs, including the nature of interfaces in insulation design. We have investigated IEC 61109 Annex C (5000h aging test) and CEA tracking wheel test as test methods of artificial accelerated aging. The aging degree of polymer insulator is estimated by leakage current, measurement of hydrophobicity degree, damage conditions of insulator surface, withstand voltage test etc.

• 한국컴퓨터정보학회논문지
• /
• 제20권8호
• /
• pp.7-13
• /
• 2015

Recently, there are serviced user customized advertisement of various type using smart device. Representative services are advertisement service using light of smart TV screen or audible sound of smart TV to transmit advertisement information. However, those services have to do a specific action of smart device user for advertisement information or need audible audio information of TV contents. To overcome those weakness, therefore, we propose an advertisement method using inaudible sound of speaker based on smart device. This method supports the transfer of advertising content to the smart device user with no additional action or TV audio signal required to access that content. The proposed method used two high frequencies among 18kHz ~ 22kHz of audible frequency range which smart TV can send out. And it generates those frequencies synthesized with audio of TV contents as trigger signal which can send advertisements to smart device. Next, smart device analysis the trigger signal and request advertisement contents related to the signal to server. After then, smart device can show the downloaded contents to user. Because the proposed method uses the high frequencies of sound signals via the inner speaker of the smart device, its main advantage is that it does not affect the audio signal of TV content. To evaluate the efficacy of the proposed method, we developed an application to implement it and subsequently carried out an advertisement transmission experiment. The success rate of the transmission experiment was approximately 97%. Based on this result, we believe the proposed method will be a useful technique in introducing a customized user advertising service.

• Current Optics and Photonics
• /
• 제2권2호
• /
• pp.140-146
• /
• 2018

In this paper, mesoscale optical surface structures are found to possess both geometric and wave optics features. The study reveals that geometric optic analysis cannot correctly predict the experimental results of light transmission or reflection by mesoscale optical structures, and that, for reliable analyses, a hybrid approach incorporating both geometric and wave optic theories should be employed. By analyzing the transmission patterns generated by the mesoscale periodic pyramid prism plates, we show that the wave optic feature is mainly ascribed to the edge diffraction effect and we estimate the relative contributions of the wave optic diffraction effect and the geometric refraction effect to the total scattering field distribution with respect to the relative dimension of the structures.