• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.204.2-204.2
• /
• 2013

Wide band gap II-VI semiconductors have attracted the interest of many research groups during the past few years due to the possibility of their applications in light-emitting diodes and laser diodes. Among the II-VI semiconductors, ZnO is an important optoelectronic device material for use in the violet and blue regions because of its wide direct band gap (Eg ~3.37 eV) and large exciton binding energy (60 meV). F-doped ZnO (FZO) and undoped ZnO thin films were grown onto quartz substrate by the sol-gel spin-coating method. The doping level in the solution, designated by F/Zn atomic ratio of was varied from 0 to 5 in 1 steps. To investigate the effects of the structure and optical properties of FZO thin films were investigated using X-ray diffraction (XRD), UV-visible spectroscopy, and photoluminescence (PL). In the XRD, the residual stress, FWHM, bond length, and average grain size were changed with increasing the doping concentration. For the PL spectra, the high INBE/IDLE ratio of the FZO thin films doping concentration at 1 at.% than the other samples.

• Journal of Welding and Joining
• /
• v.31 no.6
• /
• pp.96-106
• /
• 2013

In this study, the effect of laser source($CO_2$ and Nd:YAG) on the microstructure and tensile properties of laser welded Al-Si coated boron steel(1.2mmt) was investigated with before and after hot-stamping. In case of as welds condition, fracture occurred in base metal unrelated to the laser source. It could be explained that tensile strength of fusion zone composed of martensite and bainite is higher than that of base metal that contains a lot of ferrite despite dilution of Al and Si from coating layer to fusion zone. In case of hot-stamping condition, the fracture occurred in fusion zone irrelevant to laser source and the tensile strength was lower than hot stamped base metal. In the $CO_2$ laser welds, $Fe_3$(Al,Si) formed near the bond line was transformed into ferrite during hot-stamping. Therefore tensile strength of bond line is lower than that of base metal and center of fusion zone and the fracture occurred in the bond line. On the other hand, in the Nd:YAG laser welds, the higher concentration of Al formed the ferrite in the fusion zone during hot-stamping treatment. Also, the thickness of centerline was thinner than that of base metal. Therefore, it is considered that fracture occurred in centerline of fusion zone due to effect of concentration stress, and it leaded to a lower tensile strength and elongation.

• Korean Journal of Comparative Education
• /
• v.22 no.4
• /
• pp.125-147
• /
• 2012

The purpose of this study is to explore university entrance system with particular regard to the interview system of some leading universities. In order to accomplish this end, I sketched university entrance system as a whole, applying procedures and entrance requirements, selecting criteria, and explore interview systems of leading universities, including Oxford, Cambridge, UCL and Imperial College. The university entrance system in the UK is closely related to the educational achievements at secondary schools and sixth form colleges. Admissions tutors look at applicant's academic ability and potential through various entrance requirements. Leading universities such as Oxbridge stress performance at interview with excellent examination grades, due to competition for places is strong. Admissions tutors are looking for the students who are best suited to the unique university education in general and the course applied for. The university entrance system in the UK would be shed light on Korea university entrance system in terms of basic principles and interviews as a whole and of addressing the academic ability and potential to flourish at the university.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.10
• /
• pp.687-694
• /
• 2019

A circular composite spar in the wing of ultra-light aircraft is subjected to both bending moment and transverse shear loads. However, the beam being used in the aircraft may be inefficient because the design would not take into account the characteristics of the circular tube that supports the bending moment in top and bottom arc parts and the transverse load in left and right ones. Therefore, it is necessary to efficiently fabricate the circular tube beam by properly selecting the stacking sequences or the laminated composite structure. In order to increase both bending and transverse shear strengths of the beams, in this study, a cross-section of circular tube is divided into four arcs: top, bottom, left and right ones. The commercial program, MSC/NASTRAN is used to calculate vertical displacement and the normal and shear strains with variation of parameters such as division angle of arc and fiber orientation. Based on the results, the effective parameters for the new circular composite beam are presented to increase its bending and shear strengths.

• Journal of the Korea Convergence Society
• /
• v.10 no.11
• /
• pp.297-302
• /
• 2019

A-pillar is closely related to safety for the purpose of protecting the bodies of passengers by mitigating the impact that may be caused by the vehicle being overturned while driving. Therefore, the A-pillar should protect these parts from a variety of dynamic loads. This study result is thought to contribute for the strength and durability of A-pillar by designing two types of parts before making this product and analyzing the product which thickness is adjusted for the light weight of vehicle. If this study result is practically applied to the parts of A-pillar in a car, it is considered that the damage can be protected by the durability verification of design. By utilizing the data of analysis and design on the strength and durability of automotive A-pillar in this study, the esthetic sense can be given by being grafted onto the real automotive part.

• Animal Bioscience
• /
• v.34 no.5
• /
• pp.811-823
• /
• 2021

Objective: Eggshell color is an important indicator of egg quality for consumers, especially for brown eggs. Various factors related to laying hens and their environment affect brown eggshell coloration. However, there have been no studies investigating hepatic functions of laying hens with variable intensity of brown eggshell color. Therefore, this study was aimed to identify potential factors affecting brown eggshell coloration in aged laying hens at the hepatic transcriptomic level. Methods: Five hundred 92-wk-old Hy-line Brown laying hens were screened to select laying hens with different intensity of brown eggshell color based on eggshell color fans. Based on eggshell color scores, hens with dark brown eggshells (DBE; eggshell color fan score = 14.8) and hens with light brown eggshells (LBE; eggshell color fan score = 9.7) were finally selected for the liver sampling. We performed RNA-seq analysis using the liver samples through the paired-end sequencing libraries. Differentially expressed genes (DEGs) profiling was carried out to identify their biological meaning by bioinformatics. Results: A total of 290 DEGs were identified with 196 being up-regulated and 94 being down-regulated in DBE groups as compared to LBE groups. The Kyoto encyclopedia of genes and genomes (KEGG) analysis revealed that these DEGs belong to several biological pathways including herpes simplex infection (toll-like receptor 3 [TLR3], cyclin-dependent kinase 1, etc.) and influenza A (TLR3, radical S-adenosyl methionine domain containing 2, myxovirus [influenza virus] resistance 1, etc.). Genes related to stress response (ceremide kinase like) and nutrient metabolism (phosphoenolpyruvate carboxy-kinase 1, methylmalonic aciduria [cobalamin deficiency] cblB type, glycine receptor alpha 2, solute carrier family 7 member 11, etc.) were also identified to be differentially expressed. Conclusion: The current results provide new insights regarding hepatic molecular functions related to different intensity of brown eggshell color in aged laying hens. These insights will contribute to future studies aiming to optimize brown eggshell coloration in aged laying hens.

• The Journal of Korean Institute of Information Technology
• /
• v.16 no.11
• /
• pp.23-34
• /
• 2018

This paper presents the high efficiency and high power-factor power supply for LED lighting equipment. The proposed power supply is the single-stage power structure consisted of the full-bridge diode rectifier and flyback converter, and thus the power-factor correction and output voltage regulation are performed simultaneously using only one controller IC and one power semiconductor switch. Furthermore, the proposed power supply reduces the voltage stress and switching loss of main switch using the regenerative snubber, and it improves the system efficiency using the synchronous rectifier. The applied synchronous rectifier is the new voltage-driven type and its operation and construction are simple. In this paper, the operation principle of proposed power supply is explained through the operation analyses of its power-factor correction and main power conversion parts and the operation of synchronous rectifier is described, briefly. Also, a design example of the power circuit of 40W-class prototype is shown and the operation characteristics of proposed power supply are validated through the experimental results of the implemented prototype by the designed circuit parameter.

• Korean Journal of Veterinary Research
• /
• v.59 no.3
• /
• pp.133-139
• /
• 2019

Autophagy is a fundamental cellular process that maintains homeostasis and cell integrity, under stress conditions. Although the involvement of autophagy in various conditions has been elucidated, the role of autophagy in renal structure is not completely clarified. Our aim was to investigate the cytoprotective effect of autophagy against acute kidney injury (AKI) through cisplatin deteriorative pathway, which leads to AKI via renal cell degradation. For in vivo experiments, male Sprague Dawley rats were divided in to 2 groups (n = 6/group) as control, Cis-5D. Following a single intraperitoneal injection of cisplatin, rats were sacrificed after 5 days. Blood urea nitrogen (BUN), creatinine (Cr) and histological alterations were examined. Further, expression of key regulators of autophagy, light-clain 3 (LC3), p62, and Beclin1, was evaluated by immunohistochemistry (IHC). The rats exhibited severe renal dysfunction, indicated by elevated BUN, Cr. Hematoxylin and eosin staining revealed histological damages in cisplatin-treated rats. Furthermore, IHC analysis revealed increased expression of LC3, Beclin1 and decreased expression of p62. Furthermore, expression of aforementioned autophagy markers was restricted to proximal tubule. Taken together, our study demonstrated that cisplatin can cause nephrotoxicity and lead to AKI. This phenomenon accelerated autophagy in renal proximal tubules and guards against AKI.

• Journal of Powder Materials
• /
• v.27 no.6
• /
• pp.490-497
• /
• 2020

The 3D printing process provides a higher degree of freedom when designing ceramic parts than the conventional press forming process. However, the generation and growth of the microcracks induced during heat treatment is thought to be due to the occurrence of local tensile stress caused by the thermal decomposition of the binder inside the green body. In this study, an alumina columnar specimen, which is a representative ceramic material, is fabricated using the digital light process (DLP) 3D printing method. DTG analysis is performed to investigate the cause of the occurrence of microcracks by analyzing the debinding process in which microcracks are mainly generated. HDDA of epoxy acrylates, which is the main binder, rapidly debinded in the range of 200 to 500℃, and microcracks are observed because of real-time microscopic image observation. For mitigating the rapid debinding process of HDDA, other types of acrylates PETA, PUA, and MMA are added, and the effect of these additives on the debinding rate is investigated. By analyzing the DTG in the 25 to 300℃ region, it is confirmed that the PETA monomer and the PUA monomer can suppress the rapid decomposition rate of HDDA in this temperature range.

• Animal Bioscience
• /
• v.34 no.7
• /
• pp.1243-1252
• /
• 2021

Objective: An experiment was conducted to investigate the continuous and intermittent lighting program effects on terms of the productive performance, carcass traits, blood biochemical parameters, innate immune and oxidative status in broiler chicks. Methods: A total of 600 Cobb-500 one day old chicks were randomly allocated into six equal groups (100 chicks per treated group with five replicates of 20 chicks each) based on lighting program; 22 continuous lighting (22 C), 11 h lighting+1 darkness twice daily (11 L/1 D), 20 h continuous lighting (20 C), 5 h lighting+1 darkness four times daily (5 L/1 D), 18 h continuous lighting (18 C) and the final group subjected for 3 h lighting+1 h darkness six times daily (3 L/1 D). The experimental period lasted 42 days. Results: Compared with those under the intermittent light program, broiler chicks exposed to continuous lighting for 22 h had significant improvement in live body weight and carcass (dressing and breast percentage) measured traits. Though reducing lighting hours significantly reduced feed intake and feed conversion ratio values. Different lighting programs revealed no significant effect on all blood biochemical parameters. Oxidative stress and innate immunity parameters significantly enhance by reducing lighting hours (3L/1D). Conclusion: The findings suggest that reducing lighting hours up to 3L/1D would be more useful in enhancing feed efficiency, innate immunity, and oxidative status compared with continuous lighting programs on broilers.