• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 및 기술 세미나 논문집 디스플레이 광소자
• /
• pp.55-56
• /
• 2008

The photo leakage currents of a conventional hydrogenated amorphous silicon(a-Si:H) thin film transistor(TFT) were investigated and analyzed in the case of illumination from various lightsources such as halogen lamp, cold cathode fluorescent lamp(CCFL) backlight, and white light emitting diode(LED) backlight The photo leakage characteristics showed the apparent differences in the leakage level and in the $I_{on}/I_{off}$ ratio in spite of the similar luminances of light sources. This leakage level is expected to be related to the wavelength of the lowest intensity peak from spectral analysis of light sources.

• 한국통신학회논문지
• /
• 제28권5A호
• /
• pp.323-332
• /
• 2003

본 논문에서는 광원이 불필요하며 단일 광섬유를 통하여 양방향 전송이 가능한 base station용 광송수신기 모듈을 제안하였다. 제안한 시스템에서는 써큘레이터와 Mach-Zehnder 변조기로 구성된 ring-type의 base station에서 central office로부터 하향 전송된 광신호의 일부를 재사용하여 상향신호 전송에 사용한다. 시스템의 성능을 평가하기 위해서 IS-95 CDMA 신호 전송을 통한 ACPR 특성과 14개의 캐리어 신호 전송을 통한 CNR을 측정하였다.

• Journal of the Optical Society of Korea
• /
• 제18권4호
• /
• pp.345-349
• /
• 2014

A direct-lit color-matching liquid crystal display using a lenticular lens array with grouped lens elements that image linear RGB light sources on the RGB subpixels of a color filter to enhance transmittance is designed, simulated, and fabricated. The RGB LED linear light sources were fabricated using small RGB LEDs in a linear array arrangement, and the lenticular lens array consisted of eight units of the same structure with a gap of 2.19 mm. The optical transmittance of the liquid crystal panel was improved by as much as 240% due to the color matching.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2005년도 춘계 종합학술대회 논문집
• /
• pp.382-386
• /
• 2005

본 논문에서는 주변 조명과 환경의 변화에 대하여 강건한 화염 검출 방법을 제안한다. RGB 색좌표계에서 화염과 조명의 색 특성을 분석하여 주변색과 화염을 분리할 수 있고 조명에 강건한 임계값을 설정한다. 그리고 화염은 발생 후 동적인 변화를 가지므로 평균 히스토그램 차는 조명과 환경 변화에 강건한 화염 검출을 가능하게 한다. 본 논문에서는 화염 영역 내부의 픽셀 수의 변화를 계산하여 화염을 인지하도록 한다. 실험 결과 제안한 방법은 실시간 처리가 가능하고 조명과 환경 변화에 불구하고 화염 검출 성능이 우수함을 보인다.

• Journal of Power Electronics
• /
• 제14권4호
• /
• pp.788-795
• /
• 2014

This paper demonstrates the dynamic behaviors of paralleled high power IGBTs using trench and fieldstop technologies. Four IGBTs are paralleled and standard deviation is adopted to represent the imbalance. Experiments are conducted under three different operation conditions and at different temperatures ranging from $-25^{\circ}C$ to $125^{\circ}C$. The experimental results show that operation at very low and very high temperatures usually aggravates the switching behaviors. There is a trade-off between the balance and the losses at low temperatures. These results can help in the design of heat sinks in paralleling applications confronting very low temperatures.

• 대한치과교정학회지
• /
• 제35권6호
• /
• pp.443-450
• /
• 2005

본 연구는 아말감 면에 광중합형 레진으로 교정용 브라켓을 접착시킬 경우, 광원의 차이(할로겐 광중합기와 light-emitting diode (LED) 광중합기)와 샌드블라스팅 표면처리 여부에 따른 접착제의 전단결합강도를 비교하고자 시행되었다. 발거된 소구치 30개를 대조군으로 이용하였으며 법랑질 표면을 산부식한 후 통상적인 방법으로 브라켓을 접착하였다. 60개의 다른 소구치에 아말감 충전을 하여 실험군으로 이용하였다. 두 군에서 할로겐 광중합기와 LED 광중합기를 이용하여 브라켓을 접착시키고 브라켓이 탈락될 때까지 힘을 가해 전단결합강도를 측정하였다. 실험 결과, 실험군의 전단결합강도는 약 3-5.5 MPa로 대조군(19MPa)보다 낮았다. 실험군에서 샌드블라스팅 표면처리를 한 경우, 할로겐 광중합기를 사용한 군이 LED 광중합기를 사용한 군보다 높은 전단결합강도를 보였으나 (P<0.05), 샌드블라스팅 표면처리를 하지 않은 경우에는 광원에 따라 전단결합강도에 차이를 보이지 않았다 (p > 0.05). 할로겐 광중합 군과 LED 광중합 군 모두에서 샌드블라스팅 여부에 따른 전단결합강도에 통계적으로 유의한 차이가 없었다 (p>005). 아말감 면에 광중합형 레진을 이용하여 브라켓을 접착할 경우 할로겐 광중합기와 LED 광중합기로 얻을 수 있는 접착제의 결합강도는 임상적으로 사용하기에는 낮게 나타나, 이의 증진 방법을 도모하기 위해 앞으로 더 많은 연구가 필요하리라 사료된다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2004년도 학술대회지
• /
• pp.350-354
• /
• 2004

In this study, the wear characteristics of five different dental composite resins cured by conventional halogen light and LED light sources were investigated. Five different dental composite resins of Surefil, Z100, Dyract AP, Fuji II LC and Compoglass were worn against a zirconia ceramic ball using a pin-on-disk type wear tester with 15 N contact force in a reciprocal sliding motion of sliding distance of 10 mm/cycle at 1Hz under the room temperature dry condition. The wear variations of dental composite resins were linearly increased as the number of cycles increased. It was observed that the wear resistances of these specimens were in the order of Dyract AP > Surefil > Compoglass > Z100 > Fuji II LC. On the morphological observations by SEM, the large crack formation on the sliding track of Fuji ?LC specimen was the greatest among all resin composites. Dyract AP showed less wear with few surface damage. There is no significant difference in wear performance between conventional halogen light curing and light emitting diodes curing sources. It indicates that a light emitting diodes (LED) source can replace a halogen light source as curing unit for composite resin restorations.

• 한국재료학회지
• /
• 제16권3호
• /
• pp.145-150
• /
• 2006

Various colors of light emitting diodes(LED) and four-band white light sources are obtained using a violet LED and various phosphor films. $BaMg_2Al_{16}O_{27}:Eu\;(blue),\;SrGa_2S_4:Eu\;(green),\;and\;Eu(TTA)_3(PTA)$ (red) phosphors are dispersed in poly-vinyl-alcohol aqueous solutions, and phosphor films are prepared by coating the suspensions to PET film. The narrow band emission of $Eu(TTA)_3(PTA)$ phosphor has excellent red luminescent property for four-band white light excited by the violet LED.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 춘계학술대회논문집
• /
• pp.14-18
• /
• 2005

It is important to select light sources and luminaires in the process of lighting design. Therefore, development of light sources has been constantly grown for a high efficacy and long life. And, the design of luminaires has been developed for the reflection of light mechanism. But it has been not enough to study for the refraction of light mechanism Therefore, the propose of this study is to study for the refraction of light mechanism. In addition, this study is modeling for the luminous intensity distribution of planar prism to use the results of photometric data that is able to obtain various luminous intensity distribution.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.154-156
• /
• 2006

A few ten mW white LED can substitute for the indicator light source and it is required to study several watt multi-chip semiconductor light sources in order to replace the light sources for general illumination such as incandescent lights and fluorescent lanes. Since the optical technology used for several mW white LED light source uses only 30% to 52% of the light it is required to develop the design technology of optical system and lens to improve the efficiency more than 80% for insuring the high power of white LED. In this paper, we designed and fabricated new structure reflector to increase the efficiency and is easy to make high power multi-chip LED lamp.