• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.2
• /
• pp.1057-1069
• /
• 2017

The applications of Wireless Sensor Networks (WSN) are progressively adopting for various smart home services such as home automation, controlling smart home household appliances, constrained application services in a smart home, etc. However, enabling a seamless and ubiquitous WSN communication between the smart home appliances is still a challenging job. Therefore, in this paper, we propose a smart home control system using an Actuator based ZigBee networking (AZNET). The working of the proposed system is further divided into three phases, 1) an interference avoidance system is adopted to mitigate the effect of interference caused due to the co-existence of IEEE 802.11x based wireless local area networks (WLAN) and WSN, 2) a sensor-based smart light control system is used to fulfill the light requirement in the smart home using the sunlight with light source, and 3) an autonomous home management system is used to regulate the usage time of the electronic appliances in the smart home. The smart is tested in real time environment to use the sunlight with light sources in a various time of the day. Similarly, the performance of the proposed smart home is verified through simulation using C# programming language. The results and analysis revealed that the proposed smart home is less affected by the interference and efficient in reducing the energy consumption of the appliances available in the smart home scenario.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.3
• /
• pp.341-352
• /
• 2019

LTV(Light Tactical vehicle) operating in our military requires higher levels of performance and durability to withstand harsher conditions than ordinary vehicles, as they must travel on both rough-train and off-road as well as on public roads. Recently, developed light tactical vehicle is developed by a variety of test evaluations in order to satisfy ROC(Required Operational Capability) by the requirement military group. However, there is no standardized driving test condition for satisfying the durability performance of Korean tactical vehicle. Therefore, this study aims to provide basic data to establish reliable driving test conditions by analyzing the maneuver conditions and the driving data in order to select the representative drive course required. To do this, we analyzed the future operational environment, the area of operation analysis and the driving information of light tactical vehicle.

• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.90-93
• /
• 2002

Phytochrome A (phyA) and phytochrome B (phyB) perceive light and adapt to fluctuating circumstances by different manners in terms of effective wavelengths, required fluence and photoreversibility. Action spectra for induction of seed germination and inhibition of hypocotyl elongation using phytochrome mutants of Arabidopsis showed major difference. PhyA is the principal photoreceptor for the very low fluence responses and the far-red light-induced high irradiance responses, while phyB controls low fluence response in a red/far-red reversible mode. The structural requirement of their bilin chromophores for photosensory specificity of phyA and phyB was investigated by reconstituting holophytochromes through feeding various synthetic bilins to the following chromophore-deficient mutants: hy1, hyl/phyA and hyl/phyB mutants of Arabidopsis. We found that the vinyl side-chain of the D-ring in phytochromobilin interacts with phyA apoprotein. This interaction plays a direct role in mediating the specific photosensory function of phyA. The ethyl side-chain of the D-ring in phycocyanobilin fails to interact with phyA apoprotein, therefore, phyA specific photosensory function is not observed. In contrast, both phytochromobilin and phycocyanobilin interact with phyB apoprotein and induce phyB specific photosensory functions. Structural requirements of the apoproteins and the chromophores for the specific photoperception of phyA and phyB are discussed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.673-675
• /
• 2004

This study proposes controller with voltage-compensated drivers for producing gray-scaled pictures on passive matrix organic light emitting diodes (PMOLEDs) panels. The controller includes voltage type drivers so the output impedance of the driver is far less than that of the current-type driver. Its low output impedance provides better electron-optical properties than those of traditional current drivers. A free running clock and a group of counters are applied to the gray-scaled function so that phase lock loop (PLL) circuit can be reduced in the controller. A pre-charge function is used to enhance performance of the luminance of an active OLED pixel. As a result, distribution of the low gray level portion is achieved linear relationship with input data. In this work, the digital part of the proposed controller is implemented using FPGA chips, and analog parts are combined with a digital-analog converter (DAC) and analog switches. A still image is displayed on a $48^{\ast}64$ PMOLEDs panel to assess the luminance performance fir the controller. Based on its cost requirement and luminance performance, the controller is qualified to join the market for driving PMOLEDs panels.

• Korean Institute of Interior Design Journal
• /
• v.24 no.6
• /
• pp.137-144
• /
• 2015

Light was the symbol of the city's prosperity and culture. People can walk around the city at the night time with safe. Now light is used with beauty and function at the same time. This study is the example how to draw the lighting design concept in specific city and district based on the citizen-minded survey. The citizen-minded survey makes a new chance taking the goodness and characteristics from local city specially and select the site for applying the specific opinion and requirement in the city. The expression of design concept on night landscape design gives the fresh image to the city during the night time. Because people feel the free and dynamic mood in the night landscape lighting, it is very important to set and express the design concept on night landscape design. The result of this study was applied in the Daegu city. In particular, the distribution complex's night landscape lighting in the Daegu was designed with specific concept expression from the citizen-minded survey. Making and expressing the design concept on night landscape design is basic for unity and diversity in the city.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.791-793
• /
• 2006

In the satellite camera, the incoming light source is converted to electronic analog signals by the electronic component for example CCD (Charge Coupled Device) detectors. The analog signals are amplified, biased and converted into digital signals (pixel data stream) in the video processor (A/Ds). The outputs of the A/Ds are digitally multiplexed and driven out using differential line drivers (two pairs of wires) for cross strap requirement. The MSC (Multi-Spectral Camera) in the KOMPSAT-2 which is a LEO spacecraft will be used to generate observation imagery data in two main channels. The MSC is to obtain data for high-resolution images by converting incoming light from the earth into digital stream of pixel data. The video data outputs are then MUXd, converted to 8 bit bytes, serialized and transmitted to the NUC (Non-Uniformity Correction) module by the Hotlink data transmitter. In this paper, the video data streams, the video data format, and the image data processing routine for satellite camera are described in terms of satellite camera control hardware. The advanced satellite with very high resolution requires faster and more complex image data chain than this algorithm. So, the effective change of the used image data chain and the fast video data transmission method are discussed in this paper

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.8 s.251
• /
• pp.957-964
• /
• 2006

As the requirement of LCD products which are large screen and have high brightness increases, the role of light guide panel (LGP) of which micro-features diffuse the light uniformly on surface is getting important. In general, there are many errors in machining like machine tool errors process error, setup error and etc. The amount of setup error in general machining is not so big in comparison with the others, so it is mostly neglected. But, especially in v-groove micromachining, setup error has a significant effect on micro-features. Low quality product and high cost are resulted from setup error. In v-groove micromachining, to confirm the effect of setup error, it is identified and then setup error synthesis model is derived from analysis of tool and workpiece setup. In addition, to predict the micro-features affected by setup error and enhance the production efficiency, the setup condition satisfying the tolerance of micro-features is geometrically analyzed and presented.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.4
• /
• pp.32-38
• /
• 2018

In this study, the one-piece propeller shaft composed of carbon/epoxy was designed and manufactured for 4 wheel drive automobiles that can bear the target torsional torque performance of 3.5kN.m. For the CFRP tube, braiding machine was used to weaving carbon fiber and it was formed the braided yarns with the braid angle ${\pm}45^{\circ}$ and axial yarns to improve strength of the lengthwise direction. The final CFRP tube of propeller shaft was evaluated through the torsional torque test. The CFRP propeller shaft satisfied requirement of the target torsional maximum torque of 3.5kN.m. Also, it was found that the one-piece composite propeller shaft with CFRP tube had 30% weight saving effect compared with a two-piece steel propeller shaft.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.3
• /
• pp.630-636
• /
• 2010

A survey of the endangered orchid Orchis militaris populations was carried out in north-eastern Italy. The occurrence of fungal root endophytes was investigated by light and electron microscopies and molecular techniques. Two main sites of presence were individuated in the Euganean Hills, differing as to the percentage of flowering individuals and of capsules completing maturity. Fluorescence microscopy revealed an intracellular cortical colonization by hyphal pelotons. Two ITS PCR products co-amplified. Sequencing revealed for the former an identity and a high similarity (99%) with a Tulasnellaceae (Basidiomycota) fungus found within tissues of the same host in independent studies in Hungary and Estonia, suggesting an interesting case of tight specificity throughout the Eurosiberian home range. The second amplicon had 99% similarity with Tetracladium species (Ascomycota) recently demonstrated as potential endophytes. TEM revealed two different hyphal structures. Double fungal colonization appears to occur in Orchis militaris and the possible requirement of a specific fungal partner throws light on the causes of this plant's rarity and threatened status.

• Current Optics and Photonics
• /
• v.2 no.4
• /
• pp.348-355
• /
• 2018

How to measure the creepage distance of an insulator quickly and accurately is a problem for the power industry at present, and the noticeable concern is that the high voltage insulation equipment cannot be measured online in the charged state. In view of this situation, we develop an on-line measurement system of creepage distance for high voltage insulators based on binocular stereo vision. We have proposed a method of generating linear structured light using a conical off-axis mirror. The feasibility and effect of two ways to solve the interference problem of strong sunlight have been discussed, one way is to use bandpass filters to enhance the contrast ratio of linear structured light in the images, and the other way is to process the images with adaptive threshold segmentation and feature point extraction. After the system is calibrated, we tested the measurement error of the on-line measurement system with a composite insulator sample. Experimental results show that the maximum relative error is 1.45% and the average relative error is 0.69%, which satisfies the task requirement of not more than 5% of the maximum relative error.