Browse > Article
http://dx.doi.org/10.3795/KSME-A.2006.30.8.957

Analysis of Tool and Workpiece Setup in v-Groove Micromachining  

Cho Jung-Woo (한국과학기술원 대학원 기계공학과)
Yang Min-Yang (한국과학기술원 기계공학과)
Publication Information
Transactions of the Korean Society of Mechanical Engineers A / v.30, no.8, 2006 , pp. 957-964 More about this Journal
Abstract
As the requirement of LCD products which are large screen and have high brightness increases, the role of light guide panel (LGP) of which micro-features diffuse the light uniformly on surface is getting important. In general, there are many errors in machining like machine tool errors process error, setup error and etc. The amount of setup error in general machining is not so big in comparison with the others, so it is mostly neglected. But, especially in v-groove micromachining, setup error has a significant effect on micro-features. Low quality product and high cost are resulted from setup error. In v-groove micromachining, to confirm the effect of setup error, it is identified and then setup error synthesis model is derived from analysis of tool and workpiece setup. In addition, to predict the micro-features affected by setup error and enhance the production efficiency, the setup condition satisfying the tolerance of micro-features is geometrically analyzed and presented.
Keywords
V-groove Micromachining; Tool Setup Error; Workpiece Setup Error; Setup Error Condition;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Shreyes N.Melkote, 2005, 'Modeling of Workpiece Location Error Due to Fixture Geometric Error and Fixture-Workpiece Compliance,' Journal of Manufacturing Science and Engineering, Vol. 127   DOI   ScienceOn
2 Raksiri, C. and Parnichkun, M., 'Geometric and Force Errors Compensation in a 3-Axis CNC Milling Machine,' International Journal of Machine Tools & Manufacturing, Vol. 44, No. 12/13, pp. 1283-1291
3 Mir, Y.A., Mayer, J.R.R. and Fortin, C., 2002, 'Tool Path Error Prediction of a Five-Axis Machine Tool with Geometric Errors,' Proceedings of the Institution of Mechanical Engineers. Part B, Journal of engineering manufacture, Vol. 216, No. 5, pp. 697-712   DOI   ScienceOn
4 Srivastava, A.K., Veldhuis, S.C. and Elbestawit, M.A., 1995, 'Modeling Geometric and Thermal Errors in a Five-Axis CNC Machine Tool' International Journal of Machine Tools & Manufacturing, Vol. 35, No. 9, pp. 1321-1337   DOI   ScienceOn
5 Ramesh, R., Mannan, M.A. and Poo, AN., 2000, 'Error Compensation in Machine Tools-a Review Part I: Geometric, Cutting-Force Induced and Fixture-Dependent Errors,' International Journal of Machine Tools & Manufacturing, Vol. 40, No. 9, pp. 1235-1256   DOI   ScienceOn
6 Ramesh, R., Mannan, M.A. and Poo, A.N., 2000, 'Error Compensation in Machine Tools -a Review Part II: Thermal Errors,' International Journal of Machine Tools & Manufacturing, Vol. 40, No. 9, pp. 1257-1284   DOI   ScienceOn
7 Park, K. T., Shin, Y,J. and Kang, B.S., 2004, 'Tool-Setup Measurement Technology of High Speed Precision Machining Tool,' Journal of Korean Society of Precision Engineering, Vol.2004, pp. 1066-1069   과학기술학회마을
8 Okafor, A.C. and Ertekin, Yalcin M., 2000, ''Derivation of Machine Tool Error Models and Error Compensation Procedure for Three Axes Vertical Machining Center Using Rigid Body Kinematics,' International Journal of Machine Tools & Manufacturing, Vol. 40, No. 8, pp. 1199-1213   DOI   ScienceOn