• 시스템엔지니어링학술지
• /
• 제13권2호
• /
• pp.1-8
• /
• 2017

The Core in Weapon system R&D is to realize the user required capabilities in limited schedule and cost. Therefore, the design of weapon system focuses to functional design for realization of requirement capabilities. However, the weapon system should not only basically bring the confidence to friendly forces bring fear to enemy forces to maximize the operational effectiveness of weapon systems and we consider the exterior design as the important factor to compete with foreign systems in international defense market besides capabilities and cost. For that reason, we made study case about the visual design decision process applied to the LVT(light tactical vehicle) project which was recent successful deployment among the many R&D projects of auto industry. Based on this case, this study suggests the necessity of the exterior design decision process the maneuver weapon system is developed.

• 한국소음진동공학회논문집
• /
• 제21권9호
• /
• pp.850-857
• /
• 2011

Generally, sound-absorbing materials in vehicles are used for giving the comfort to passengers by reducing noise while driving. Materials of which targets are light weight, high performance, eco friendliness and recycling have been developed recently. In this study, sound-absorbing materials using PET(polyethylene terephthalate) hollow fibers to achieve the light weight and the high sound absorption performance are developed, and then evaluated to meet a requirement for the automotive components. The test results show that the acoustic performances of developed products having new fiber structure are better than those of the conventional product.

• 한국인쇄학회지
• /
• 제14권1호
• /
• pp.89-114
• /
• 1996

Liquid crystal-polymer composite(LCPC) films consisting of a continuous LC phase embedded in a three-dimensional network of polymer matrix are formed by photopolymerization-induced phase separ on. The LCPC films are switched from a light-scattering stats to a highly transparent stats on the application of electric fields. Since the alignment of LC molecular determines the electro-optical properties of films, the requirement for good contrast is to generate the nematic phase at high concentration. On the other hand, the concentration of UV-curable monomer must be increased above some critical value to from the flexible matrix of unbounded polymer. The mixing ratio of LC and UV-curable monomer affects the electro-optical and viscoelastic properties of LCPD films in two opposing ways. By controlling the phase separation process, at an LC fraction of 0.7, the maximum performance of LCPC films has been achieved, the response time of which is 2ms on the application of electric fields.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.178-181
• /
• 2001

The organic light-emitting devices (OLEDs) based on fluorescence have low efficiencies due to the requirement of spin-symmetry conservation. By using the phosphorescent material, the internal quantum efficiency can reach 100 %, compared to 25 % in the case of the fluorescent material. Thus, the phosphorescent OLEDs have recently been extensively studied and showed higher internal quantum efficiencies then the conventional OLEDs. In this study, we investigated the characteristics of the phosphorescent OLEDs, with the green emitting phosphor, Ir(ppy)$_3$ (tris(2-phenylpyridine)iridium). The devices with a structure of ITO/TPD/Ir(PPy)$_3$ doped in the host material/BCP/Alq$_3$/Li:Al/Al were fabricated, and its electrical and optical characteristics were studied. By changing the doping concentration of Ir(PPy)$_3$ and the host materials, we fabricated several devices and investigated the device characteristics.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권8호
• /
• pp.1000-1003
• /
• 2014

There are 70 vertical and 70 horizontal correctors for Pohang Light Source. Until mid of 2000, power supplies for these correctors were based on 1990's technology, so the global orbit feedback system was not possible with poor 12 bit resolution. A new task force team was assembled to develop new power supplies with BESSY type DAC cards. After the project, two vertical correctors in each lattice were connected with new power supplies, and the global orbit feedback was available within the accuracy of 5 microns. However, this replacement was not enough to satisfy the beam stability requirement of 2 microns for PLS. We have launched another power supply design based on all digital technology. This attempt was completed within a year, and 80 units were assembled in house. Currently, the global orbit feedback system is running successfully with new digital power supplies and the compensation of chamber motion due to the thermal load by using digital displacement transducers attached on each BPMs.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.2050-2055
• /
• 2009

This paper describes the proceeding experimental results to replace the 32 [W] fluorescent lamp installed in subway train to a LED module. We fabricated 25 [W] LED modules to meet the illuminance 300 [lx] specified in the standard for subway train. After the installation of LED modules, comparative analysis with conventional fluorescent lamps was carried out. From the experimental results, illuminances on the height of 0.85 [m] and 1 [m] above floor were 323 [lx] and 360 [lx], respectively. These illuminances satisfied the requirement 300 [lx]. By the application of 25 [W] LED module as a light source in subway train, energy saving about 22 [%] compared with 32 [W] fluorescent is acquired. Also, low cost of maintenance is expected due to 8 times longer lifetime 50,000 hours of LED than that 6,000 hours of fluorescent lamp.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.409-414
• /
• 2003

In this study we examined the method to select the size of the conductor rail for light rail system. Study results shows that using the conductor rail with lower resistivity requires fewer power substation, which results in lower construction cost. It also produces less copper loss. Therefore first choose the conductor rail with lowest resistivity and select the substation location, Next conduct computer simulation study to confirm it meets voltage requirement. if the minimum voltage is well above the required minimum voltage, substation number can probably be further reduced.

• 한국버섯학회지
• /
• 제8권4호
• /
• pp.137-141
• /
• 2010

1. 광 종류별 조도는 백색광은 2,270Lux로 가장 밝았으며, 황색광 1,750Lux, 청색광 460Lux, 적색광 400Lux의 순이었다. 2. 자실체 특성을 조사한 결과, CBM-1757이 느티만가닥버섯에 비하여 갓의 크기와 대직경이 양호한 경향이었으며, 광 종류간에는 황색광에서 다른 광에 비하여 다소 좋은 경향이었다. 3. 생육기간은 CBM-1757이 느티만가닥버섯에 비하여 균 배양일수는 2일, 초발이소요일수는 1일, 생육일수는 1일정도 단축되어 생육기간이 8일 정도 빠른 경향이었다. 광종류간에는 황색광에서 생육기간이 70일 소요되어 다른 광에 비하여 2~4일 정도 단축되는 경향이었다. 4. 유효경수 및 개체중은 품종간에 차이가 나지 않는 경향이었고, 병당 수량은 느티만가닥버섯 94.8g에 비하여 CBM-1757은 95.6g으로 약간 많았다. 광 종류간에는 백색광의 96.0g에 비하여 청색광 및 적색광에서는 2~9%가 감소되었으나, 황색광에서는 103.4g으로 8% 정도 증수되는 경향이었다. 5. 버섯의 색도는 CBM-1757이 느티만가닥버섯에 비하여 명도, 적색도 및 황색도가 높았으며, 광 종류간에는 황색광에서 다른 광에 비하여 다소 높은 경향이었다.

• 한국자원식물학회지
• /
• 제8권1호
• /
• pp.41-46
• /
• 1995

조경용(造景用) 및 분재용(栽用) 화목(花木)으로 개발가치가 매우 높은 참꽃나무의 종자발아특성(種子發芽特性)에 관하여 실험한 결과는 다음과 같다. 1. 항온조건(恒溫條件)에서의 발아적온(發芽適溫)은 $20^{\circ}C$이었고 $25^{\circ}C$ 이상의 온도에서는 발아가 심하게 억제되었다. 한편 $15^{\circ}C$에서는 초기발아노(初期發芽努)는 저조하였지만 최종발아율은 $20^{\circ}C$에서와 거의 비슷하였다. 2. 야간온도(夜間溫度)를 $15^{\circ}C$로 고정한 변온처리(變溫處理)를 통하여 $25^{\circ}C$와 $30^{\circ}C$의 고온처리구(高溫處理區)에서 항온처리에 비하여 발아율이 현저하게 높아겼다. 3. 황색(黃色) 및 적색광(赤色光) 처리구(處理區)에서는 대조구(對照區)에 비하여 유의성(有意性)있게 발아율이 증가하였고, 녹색광(綠色光) 처리구(處理區)에서는 발아율이 현저하게 억제되었다. 또한 암처리구(暗處理區)에서는 전혀 발아하지 못하여 참꽃나무 종자는 절대적(絶對的) 광발아성(光發芽性) 종자(種子)임이 확인되었다. 4. 암조건(暗條件)에서도 $50{\sim}100ppm$ 농도(濃度)의 GA처리에 의하여 발아(發芽)가 가능하여 GA의 광대체효과(光對替效果)가 확인되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.374-374
• /
• 2012

Nowadays, Active Matrix Organic Light-Emitting Diodes (AM-OLEDs) are the superior display device due to their vivid full color, perfect video capability, light weight, low driving power, and potential flexibility. One of the advantages of AM-OLED over Liquid Crystal Display (LCD) lies in its flexibility. The potential flexibility of AM-OLED is not fully explored due to its sensitivity to moisture and oxygen which are readily present in atmosphere, and there are no flexible encapsulation layers available to protect these. Therefore, we come up with a new concept of Inorganic-Organic hybrid thin film as the encapsulation layer. Our Inorganic layer is Al2O3 and Organic layer is F-Alucone. We deposited these layers in vacuum state using Atomic Layer Deposition (ALD) and Molecular Layer Deposition (MLD) techniques. We found the results are comparable to commercial requirement of 10-6 g/m2 day for Water Vapor Transmission Rate (WVTR). Using ALD and MLD, we can control the exact thin film thickness and fabricate more dense films than chemical or physical vapor deposition methods. Moreover, this hybrid encapsulation layer potentially has both the flexibility of organic layers and superior protection properties of inorganic layer.