• Journal of the Korean Wood Science and Technology
• /
• 제46권2호
• /
• pp.125-131
• /
• 2018

This study was conducted to understand and to compare the qualitative aspects of anatomical characteristics in compression wood (CW), lateral wood (LW), and opposite wood (OW) in a stem of Ginkgo biloba. The qualitative analysis was examined by optical microscopy and scanning electron microscopy. CW in Ginkgo biloba disks were dark brown in color, and the OW and LW were light brown in color. CW and OW showed abrupt transitions from earlywood to latewood, while LW showed a gradual transition. Cross sections of CW presented circular tracheids with angular outlines, many intercellular spaces, and varying sizes of lumens. Cross sections of LW and OW showed rectangular tracheids, fewer intercellular spaces, and varying sizes of lumens. In radial sections, CW showed an irregular arrangement of tracheids in earlywood, while LW and OW showed comparatively regular arrangements. Slit-like bordered pits on the tracheid cell wall, piceoid pits in the crossfield, and a few spiral checks were present in CW. LW and OW showed bordered pits with slightly oval-shaped apertures, as well as cuppresoid pits in the crossfields. Rays were primarily uniseriate, with few biseriate rays in the tangential sections of CW, LW, and OW. The tips of the tracheids were branched in CW but had a normal appearance in LW and OW.

• 한국광학회지
• /
• 제8권6호
• /
• pp.486-491
• /
• 1997

액정표시소자(LCD:Liquid Crystal Display Device)의 핵심부분인 액정셀의 광학적 동특성을 잴 수 있는 진폭분할방식의 측광식 편광계측기를 만들었다. 이 장치는 편광상태를 결정할 빛살을 비편광빛살분할기를 써서 밝기가 거의 같은 세 줄기의 빛살로 나누고, 나누어진 각각의 빛살을 편광빛살분할기 또는 사반파장판과 편광빛살분할기를 써서 직교하는 두 편광성분으로 나눈 다음, 각 성분의 밝기를 6개의 광다이오드를 써서 잰다. 이렇게 얻은 6개의 광신호의 비를 바탕으로 들어오는 빛살의 편광상태를 결정한다. 이 장치의 시간분해능은 80.mu.s, 정확도는 뽀앙카레 공(Poincare sphere)표현에서 나타낼 때 .+-.0.3.deg.이다. LCD에 쓰이는 전형적인 네마틱 액정의 반응시간은 수십 ms이므로 이 장치를 쓰면 액정셀의 광학적 동특성을 분석할 수 있다.

• 한국산림과학회지
• /
• 제71권1호
• /
• pp.55-58
• /
• 1985

현사시나무에 흔히 분포(分布)하는 부정아유래조직(不定芽由來組織)과 dimple 및 그 주변조직(周邊組織)의 특징(特徵)을 조사(調査)한 결과(結果)는 다음과 같다. 부정아유래조직(不定芽由來組織)은 도관(導管)이 거의 발달(發達)하지 않으며 구성세포(構成細胞)의 직경(直徑)이 작고 벽후(壁厚)가 두껍다. 주변조직(周邊組織)은 목섬유(木纖維)가 만곡(彎曲)하고 격벽세포(隔壁細胞)를 형성(形成)하는 경우가 많으며 방사방향(放射方向)으로 급격(急激)히 만곡(彎曲)하고 방사조직(放射組織)이 다열화(多列化)한다. 또 부정아유래조직(不定芽由來組織) 및 dimple에 인접(隣接)한 선상변색부(線狀變色部)의 도관(導管)에는 상해(傷害) 타일로시스가 발달(發達)한다.

• 센서학회지
• /
• 제30권5호
• /
• pp.331-336
• /
• 2021

The Non-dispersive Infrared (NDIR) gas sensor has high selectivity, measurement reliability, and long lifespan. Thus, even though the NDIR gas sensor is expensive, it is still widely used for carbon dioxide (CO₂) detection. In this study, to reduce the cost of the NDIR CO₂ gas sensor, we proposed the new optical waveguide structure design based on ready-made gas pipes that can improve the sensitivity by increasing the initial light intensity. The new optical waveguide design is a structure in which a part of the optical waveguide filter is inclined to increase the transmittance of the filter, and a parabolic mirror is installed at the rear end of the filter to focus the infrared rays passing through the filter to the detector. In order to examine the output characteristics of the new optical waveguide structure design, optical simulation was performed for two types of IR-source. As a result, the new optical waveguide structure can improve the sensitivity of the NDIR CO₂ gas sensor by making the infrared rays perpendicular to the filter, increasing the filter transmittance.

• Safety and Health at Work
• /
• 제8권3호
• /
• pp.237-245
• /
• 2017

Background: Solar furnaces are used worldwide to conduct experiments to demonstrate the feasibility of solar-chemical processes with the aid of concentrated sunlight, or to qualify high temperature-resistant components. In recent years, high-flux solar simulators (HFSSs) based on short-arc xenon lamps are more frequently used. The emitted spectrum is very similar to natural sunlight but with dangerous portions of ultraviolet light as well. Due to special benefits of solar simulators the increase of construction activity for HFSS can be observed worldwide. Hence, it is quite important to protect employees against serious injuries caused by ultraviolet radiation (UVR) in a range of 100 nm to 400 nm. Methods: The UV measurements were made at the German Aerospace Center (DLR), Cologne and Paul-Scherrer-Institute (PSI), Switzerland, during normal operations of the HFSS, with a high-precision UV-A/B radiometer using different experiment setups at different power levels. Thus, the measurement results represent UV emissions which are typical when operating a HFSS. Therefore, the biological effects on people exposed to UVR was investigated systematically to identify the existing hazard potential. Results: It should be noted that the permissible workplace exposure limits for UV emissions significantly exceeded after a few seconds. One critical value was strongly exceeded by a factor of 770. Conclusion: The prevention of emissions must first and foremost be carried out by structural measures. Furthermore, unambiguous protocols have to be defined and compliance must be monitored. For short-term activities in the hazard area, measures for the protection of eyes and skin must be taken.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.423-423
• /
• 2009

Currently, lasers are one of the most popular light sources in use for medical treatment. Many studies on low power lasers are being done in cell culture or through animal tests and most report different findings, making it difficult to verify their true effects. There are shifts in trends of studies from laser and LED that are expensive and generate heat problem to LED that are economically effective and safe. Its near infrared rays can penetrate deep into skin or muscle, up to 23 cm, without causing thermal damage or impairing neighboring tissues. This study verified the performance and effectiveness of an LED irradiator that was designed to emit similar wavelengths to that of a laser and thus could be used instead of a low level laser therapy in experiments on animals. And then, each experiment was performed to irradiation group and non-irradiation group for NTacSam:SD tissue cells. MIT assay method was chosen to verify the cell increase of two groups and the effect of irradiation on cell proliferation was examined by measuring 590nm transmittance of ELISA reader. As a result, the cell increase of NTacSam:SD tissue cells was verified in irradiation group as compared to non-irradiation group. The fact that specific wavelength irradiation has an effect on cell vitality and proliferation is known through this study.

• 한국위성정보통신학회논문지
• /
• 제6권1호
• /
• pp.57-62
• /
• 2011

가시광 통신 시스템은 LED를 통해 방사되는 가시광을 이용한 차세대 통신 시스템으로, 유비쿼터스 네트워크 서비스 구축 시 에너지 절감 효과를 가져 올 수 있다. 또한 기존 인프라를 활용하여 고출력 전송이 가능하며 유지 보수 비용을 절감할 수 있다. 하지만 가시광 통신 시스템에서는 인접 송신기 간섭 신호의 영향으로 네트워크 경계에 위치한 수신기의 신호 검출 성능은 급격히 열화되고 전송 효율은 감소하게 된다. 본 논문에서는 광 빔포밍을 활용하는 경우, 송신기 간 간섭 완화 방안을 제시하고 그 수신 성능을 평가한다. 제안하는 광 빔포밍 방식은 사용하지 않는 기존 가시광 통신 시스템 대비 BER 측면에서 향상된 성능을 보이며, 평균 5~7dB 성능 개전을 가져온다.

• 한국위성정보통신학회논문지
• /
• 제7권3호
• /
• pp.63-68
• /
• 2012

가시광 통신 시스템은 LED를 통해 방사되는 가시광을 이용한 차세대 통신 시스템으로, 유비쿼터스 네트워크 서비스 구축 시 에너지 절감 효과를 가져 올 수 있다. 또한 기존 인프라를 활용하여 고출력 전송이 가능하며 유지 보수 비용을 절감할 수 있다. 하지만 가시광 통신 시스템에서는 인접 송신기 간섭 신호의 영향으로 네트워크 경계에 위치한 수신기의 신호 검출 성능은 급격히 열화되고 전송 효율은 감소하게 된다. 본 논문에서는 가시광 통신 시스템에서 다수의 Tx가 인접해 있을 때 발생하는 송신기간 간섭 문제를 광 릴레이와 광 빔포밍 기법 적용을 통하여 효율적으로 간섭을 완화하고 그 성능을 평가한다. 제안하는 시스템의 결과로 사용하지 않는 기존 가시광 통신 시스템 대비 BER 측면과 채널 용량에서 모의실험을 통하여 향상된 성능을 보인다.

• 한국재료학회지
• /
• 제23권8호
• /
• pp.447-452
• /
• 2013

Recently, products that a have 3-dimensional(3D) micro structure have been in wide use. To fabricate these 3D micro structures, several methods, such as stereo lithography, reflow process, and diffuser lithography, have been used. However, these methods are either very complicated, have limitations in terms of patterns dimensions or need expensive components. To overcome these limitations, we fabricated various 3D micro structures in one step using a pair of diffusers that diffract the incident beam of UV light at wide angles. In the experiment, we used positive photoresist to coat the Si substrate. A pair of diffusers(ground glass diffuser, opal glass diffuser) with Gaussian and Lambertian scattering was placed above the photomask in the passage of UV light in the photolithography equipment. The incident rays of UV light diffracted twice at wider angles while passing through the diffusers. After exposure, the photoresist was developed fabricating the desired 3D micro structure. These micro structures were analyzed using FE-SEM and 3D-profiler data. As a result, this dual diffuser lithography(DDL) technique enabled us to fabricate various microstructures with different dimensions by just changing the combination of diffusers, making this technology an efficient alternative to other complex techniques.

• 산업진흥연구
• /
• 제5권2호
• /
• pp.1-7
• /
• 2020

본 연구는 실내 또는 실외를 조명으로 밝게 비추는 조명등에 관한 기술로서, 보다 상세하게 설명하면 외관을 구성하는 케이스에 사방으로 투시창을 만들고, 사방 투시창에 얇은 패널(panel) 형태로 가공된 옥돌을 부착하여 조명등을 구성함으로써, 옥돌을 통해 은은한 불빛이 실내 또는 실외로 조사(照射)되므로, 사용자에게 아늑함과 따스함을 제공하고, 실내 또는 실외의 인테리어 효과를 높이는 한편 원적외선과 음이온을 발산하며, 은은한 꽃향기를 방출하는 옥돌을 이용한 조명등에 관한 기술이다. 본 연구개발의 제품의 특징은 외관을 구성하는 케이스에 사방으로 투시창이 형성되고, 사방 투시창에 얇은 패널(panel) 형태로 가공된 옥돌을 부착하여 조명등이 구성되며, 스피커를 통해 사용자에게 유익한 음악, 불경, 성경, 시조 등의 음향을 발생시키는 옥돌을 이용한 조명등을 연구했다는데 의미가 있다.