• Journal of Photoscience
• /
• 제9권2호
• /
• pp.475-478
• /
• 2002

In zoological research, penetration of light has been reported of the frontal bones of fish, birds, and reptiles, suggesting the existence of physiologically direct photic routes to frontal lobes and/or deep parts of the brain. We studied the influences of frontal exposure to photodiode light on frontal alpha wave and peripheral NK cells. Repetitive exposure of the subject's forehead to a red light diode (660nm) significantly increased the effective amplitude of the frontal alpha waves (using a mean frequency with a range of +1.0 Hz), peripheral NK activity, and the level of CD57-CD16+. Frontal alpha wave activity and the level of CD57-CD16+ increased, suggesting the possibility of a non-invasive procedure for the activation of the frontal lobe and the increase of NK cells. This light is considered to penetrate the frontal bones of humans directly, and to act on the frontal lobe and/or other immunological regulatory centers in the brain, resulting in some neuro-immunological changes.

• 한국잡초학회지
• /
• 제9권3호
• /
• pp.230-237
• /
• 1989

Bleaching herbicides(oxyfluorfen, oxadiazon, paraquat)의 작용발현에 영향을 미치는 온도 및 광의 효과를 조사한 결과 oxyfluorfen 과 oxadiazon의 제초활성은 $10-35^{\circ}C$에서 온도가 증가될수록 높았으며 온도의 효과는 제초작용 발현단계(photooxidation) 보다는 그 이전 단계에서 더욱 큰 영향이었다. 처리약제 모두 광도가 높을수록 활성이 강하였으며 paraquat 는 광질간의 활성차이가 없었으나 oxyfluorfen 및 oxadiazon 은 챙색광에서 높은 활성을 보였고 이들 두 약제에 대한 광의 효과는 광합성 및 호흡의 전자전달계나 carotenoid 생합성 보다는 chlorophyll 생합성 과정과 일정한 관련이 있다.

• 한국분무공학회지
• /
• 제23권1호
• /
• pp.22-29
• /
• 2018

The purpose of this study is to investigate the macroscopic spray characteristics and spray pattern of a gasoline direct injection (GDI) injector according to the increase of injection pressure. The macroscopic spray characteristics, such as a spray tip penetration and spray angle, were measured and analyzed from the frozen spray images, which are obtained from the spray visualization system including the high-speed camera, light-source, long-distance microscope (LDM). The spray pattern was analyzed through the deviation of the center of the spray plum and images were acquired using Nd: YAG Laser and ICCD(Intensified charge coupled device) camera. From the experiment and analysis, it revealed that the injection pressure have a significant influence on the spray tip penetration and spray pattern. However, the injection pressure have little influence on the spray angle. The increase of injection pressure induced the reduction of a closing delay. In addition, the deviation of spray center increase with the increase of injection pressure and the distance from a nozzle tip.

• 한국자동차공학회논문집
• /
• 제10권2호
• /
• pp.40-47
• /
• 2002

Because UV wavelength lights can activate photocatalysts, plasma is used as a light source of a photocatalytic reactor. Even though plasma has good intensity for photo reaction, substrate of catalyst coating was limited by the geometry of plasma generator. Usually bead type substrate was used for a pack bed type reactor. Honeycomb monolith type substrate was used with UV lamps instead plasma, due to the light penetration the honeycomb monolith length was too short to show good activity In this study a photocatalytic reactor, which is using a honeycomb monolith substrate, was investigated with plasma as an activation light source. As a parametric study the effects of 1311owing factors on plasma generation and power consumption are examined; supply voltage, substrate length, environment condition, catalyst loading and ratio. Using the test results, the practicability test was done with simulated synthetic gases representing bad smells and automotive exhaust gases.

• Medical Lasers
• /
• 제9권1호
• /
• pp.6-11
• /
• 2020

Hydrogels have been developed and used in tissue engineering and regenerative medicine to deliver therapeutics to injured or diseased tissue because of their versatility and properties that can be tailored to match the natural extracellular matrix. Hydrogels can be made with a variety of physical and chemical properties combined with light responsiveness ideal for applications in different fields of medicine that require the spatiotemporal control of therapeutics. Light, as a stimulus, is relatively inexpensive, contact-free, noninvasive with high spatial resolution and temporal control, convenient and easy to use, and allows deep tissue penetration that is relatively harmless. Photoresponsive hydrogels are ideal candidates for on-demand drug delivery systems that are capable of sustained and controlled drug release, minimizing the side effects, and ensuring the activity and efficient delivery of drugs to the target tissue.

• Restorative Dentistry and Endodontics
• /
• 제21권1호
• /
• pp.19-34
• /
• 1996

It has been demonstrated that intracoronal bleaching of pulpless teeth may result in cervical root resorption. Several authors postulated that bleaching agents such as hydrogen peroxide penetrated through the dentinal tubules to damage the surrounding tissues that cause cervical root resorption. The purpose of this study was to suggest on in vitro model for direct determination of hydrogen peroxide penetration through CEJ during nonvital bleaching. In addition, this model permit the quantification of the amount of hydrogen peroxide penetrated during the procedure. Freshly extracted intact premolars, removed for orthodontic reasons were used. Root canal treatment was performed in each tooth. And then the outer surface and crown portion of the teeth was sealed with wax leaving the CEJ. The prepared teeth mounted on the wax laminates were placed in plastic assay tubes containing 1.5ml bidistilled water with their entire root, including the CEJ, submerged in the solution. The teeth were dividied into four groups. Thermo group : thermocatalytic bleaching with superoxol Walk group: walking bleaching with sodium perborate & superoxol Combi group : combination of thermocatalytic & walking bleaching Dw group : walking bleaching with sodium perborate & water The bleaching procedure was performed three times. The bleaching intervals were at 3 days. The hydrogen peroxide present in the assay system was added to ferrous ammonium sulfate resulting in ferric ion release. Upon the addition of potassium thiocyanate a ferrithiocyanate complex results, which absorbs light at the wavelength of 467nm. The radicular penetration of hydrogen peroxide in the four groups was assessed directly using spectrophotometer. The amount of hydrogen peroxide in the samples tested is determined by comparing them with a standard curve generated by known amounts of hydrogen peroxide. The results were obtained as follows : 1. In all experimental groups except the Dw group showed lower penetration amount in day 4 than day 1, there was statistical importance in the difference (P<0.05). 2. After 3rd treatment, Thermo group showed slightly increased value and narrow distribution. Walk group showed much more penetration amount and widely dispersed value. Value of Combi group showed wide distribution without regard to treatment time, but value of Dw group evenly distributed. 3. Thermo group, Walk group and Dw group showed a tendency of increasing penetration amount with increasing treatment times(P<0.01), but Combi group revealed no statistically important differences. 4. Combi group showed the highest degree of penetration. Walk group showed lower penetration than Combi group. Thermo group & Dw group showed lower than Walk group. 5. Cervical root permeability to hydrogen peroxide varied from 0 to 35 %.

• 한국약용작물학회지
• /
• 제8권4호
• /
• pp.327-333
• /
• 2000

삽주의 재배와 효과적인 보존을 위한 기초자료를 얻고자 자생지의 환경 및 생육특성을 조사한 결과는 다음과 같다. 1. 자생지 토양특성은 유기물 함량이 높고 인산과 마그네슘 함량이 적었으며 약산성의 사양토이었다. 2. 수집지역별 생육은 남부지역 자생종이 중부지역 자생종에 비하여 초장, 엽수, 엽장, 엽폭 등의 지상부 생육이 좋았으나 수량성은 경기, 강원지역이 오히려 높았다. 3. 광투과율이 20% 이상에서 분포하고 있었으며 분포 빈도수가 $60{\sim}80%$에 가장 높았으며, 광투과율이 높을수록 생근중은 높아지는 경향이었다. 4. 삽주의 분포 빈도는 표고 $200{\sim}400m$에서 가장 높았다. 5. 임상에 따른 생육은 침엽수림에서 빈도수가 높았으나 생근중은 활엽수림과 관목림에서 높은 경향이었다. 6. 생육특성간의 상관은 초장과 염수 엽장 엽폭간에는 정의 상관이 있었으나 지상부생육과 생근경중 간에는 상관을 나타나지 않았다.

• 한국분무공학회지
• /
• 제1권2호
• /
• pp.66-73
• /
• 1996

The present study investigates experimentally the characteristics of liquid jet, which is, the spray flow in the normal direction of the air stream under the flow conditions of air velocity $110\sim125m/s$. The present study adopts with the flow visualization technique using a short duration light bulb and the image processing analyse with CCD camera. Two types of injector were used: one is a flat plate type, and the other is backward facing step type, which height are 5, 8, 10mm. Dispersion of liquid jet can be represented by gray level of CCD camera. In the upstream of liquid jet, the backward facing step shows better liquid jet penetration. However, in the downstream. mean droplet size for backward facing step injector is smaller than that for flat plate injector

• 대한치과의사협회지
• /
• 제49권1호
• /
• pp.22-32
• /
• 2011

This paper reviewed the following subheadings and a few selected references in each section were discussed: ${\cdot}$ Sealant placed over caries; is it possible? Initial caries which is not sticky during proving is possible to be placed with sealants. ${\cdot}$ Prophylaxis of fissure; which method is most effective? Mechanical preparation with fissurotomy or resin polishing bur is one of the most effective method to clean the pit and fissure. ${\cdot}$ Glassionomer cement as a sealant; GIC, wheather it released fluoride or not, cannot be as cost-effective as resin-based sealants. ${\cdot}$ Sealant products; Color(white vs opaque), fluoride(containing vs not), filler component(filled vs non-filled) do not influenced the quality and retention of sealants. ${\cdot}$ Use of intermediate bonding agent to improve retention; Intermediate bonding may increase the retention rate of sealants ${\cdot}$ Penetration method of sealants; Several methods including waiting before light curing are recommended.

• 한국생산제조학회지
• /
• 제21권5호
• /
• pp.814-823
• /
• 2012

Fluctuation of light intensity from the keyhole becomes more significant in full penetration welding than partial penetration welding, since the plasma produced in the keyhole can escape from the rear side of the keyhole. The plasma optical radiation emitted during Nd:YAG laser welding of S45C steel samples has been detected with a Photodiode and analyzed under different process conditions. As the results, the BOP was performed for welding, behavior of plasma, spatter or plume was monitored to determine the reference signal. Then, random combination was made for comparison with the reference signal, which aimed at verifying reliability of the welding monitoring system that this study intended to develop.