• Bulletin of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.167-173
• /
• 2013

A series of highly efficient red phosphorescent heteroleptic iridium(III) complexes 1-6 containing two cyclometalating 2-(2,4-substitued phenyl)quinoxaline ligands and one chromophoric ancillary ligand were synthesized: (pqx)$_2Ir$(mprz) (1), (dmpqx)$_2Ir$(mprz) (2), (dfpqx)$_2Ir$(mprz) (3), (pqx)$_2Ir$(prz) (4), (dmpqx)$_2Ir$(prz) (5), (dfpqx)$_2Ir$(prz) (6), where pqx = 2-phenylquinoxaline, dfpqx = 2-(2,4-diflourophenyl)quinoxaline, dmpqx = 2-(2,4-dimethoxyphenyl)quinoxaline, prz = 2-pyrazinecarboxylate and mprz = 5-methyl-2-pyrazinecarboxylate. The absorption, emission, electrochemical and thermal properties of the complexes were evaluated for potential applications to organic light-emitting diodes (OLEDs). The structure of complex 2 was also determined by single-crystal X-ray diffraction analysis. Complex 2 exhibited distorted octahedral geometry around the iridium metal ion, for which 2-(2,4-dimethoxyphenyl)quinoxaline N atoms and C atoms of orthometalated phenyl groups are located at the mutual trans and cis-positions, respectively. The emission spectra of the complexes are governed largely by the nature of the cyclometalating ligand, and the phosphorescent peak wavelengths can be tuned from 588 to 630 nm with high quantum efficiencies of 0.64 to 0.86. Cyclic voltammetry revealed irreversible metal-centered oxidation with potentials in the range of 1.16 to 1.89 V as well as two quasi-reversible reduction waves with potentials ranging from -0.94 to -1.54 V due to the sequential addition of two electrons to the more electron-accepting heterocyclic portion of two distinctive cyclometalated C^N ligands.

• Fibers and Polymers
• /
• v.5 no.4
• /
• pp.303-308
• /
• 2004

A natural colorant was extracted from Cassia tara L. using buffer solutions (pH: 2-11) as extractants. The dyeing solution (Cassia tara L. extract) extracted using pH 9 buffer solution was found to give the highest K/S values of dyed fabrics. Cotton and silk fabrics were dyed with Cassia tara L. extract at $60^{\circ}C$ for 60 min with pre-treatment of various metal salts as mordants. It was found that Cassia tara L. extract was polygenetic dyestuffs and its major components were anthraquinones. Studies have been made on the effects of the kind of mordant on dyeing properties and colour fastnesses of cotton and silk fabrics. The K/S of cotton fabrics increased in the order of the dyeing using $FeSO_4 >CuSO_4> ZnSO_4> MnSO_4\cong Al_2(SO_4)_3 > NiSo_4 > none$, however, the K/S of silk fabrics increased in the order of the dyeing using $FeSO_4 > CuSO_4 > ZnSO_4\cong Al_2(SO_4)_3 > MnSO_4\cong NiSO_4 > none$. It was found that the K/S values of dyed fabrics were largely affected by the colour difference $(\DeltaE)$ between mordanted fabric and control fabric. However, they were not depended on the content of mordanted metal ion of the fabrics. Mordants $FeSO_4$ and CuSO_4$ for cotton fabric, $FeSO_4,\; CuSO_4,\; and\; Al_2(S0_4)_3$ for silk fabric were found to give good light fastness (rating 4).

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.2
• /
• pp.111-117
• /
• 2010

Sonoluminescence (SL) is the light emitting phenomenon accompanied with ultrasonic cavitation in liquid. It attracts many interests because physics behind it remains uncertain and few applications have appeared. It has been known that the color of SL changes in solutions which include metallic ions. In the present work, colors of SL in alkali metallic and alkaline earth metallic ions were considered. RGB component was used to analyze the color of SL. By using RGB component, it was found that color of SL in metallic solution can be resolved into color of SL in pure water and flame color of metal which is different from high intensity color of line spectrum of alkaline earth metal. From this result, influence of metallic ion on SL and the temperature on violent collapsing of cavitation bubble was discussed.

• Journal of the Korean Chemical Society
• /
• v.38 no.1
• /
• pp.50-54
• /
• 1994

Spectrophotometric determination of some light lanthanide ions by flow injection method is described. Chromeazurol S forms water soluble complex with lanthanide ions in the presence of DTAB. The absorption maximum of the complexes are from 650 nm to 655 nm and the molar absorptivities were ca. $1.8{\times}10^5\;L mol^{-1}cm^{-1}$ on Tris buffer (pH 10.5). The calibration curves for Nd(III), Eu(III) and Sm(III) obtained by FIA are over the range of 0.1 to 0.6 ppm and the correlation coefficient were ca. 0.9993. The detection limits (S/N) were from 10 ppb for Nd(III) and Eu(III) to 20 ppb for Sm(III). The relative standard deviations was ${\pm}$.2% for 0.4 ppm sample. The samples throughput was ca. $50\;cm^{-1}$.

• Applied Biological Chemistry
• /
• v.42 no.2
• /
• pp.134-139
• /
• 1999

The characteristics of anthocyanin pigments extracted from cherry(Prunus serrulata L. var. spontanea Max. Wils.) were investigated at the various conditions, such as light, temperature, organic acid, metal ion and pH. The pigments were fairly stable under the sunlight during the 20 days storage period at room temperature. The pigments covered with the Al-foil, as well as red, blue, green and yellow films, were very stable at pH 2.5. The high thermal stability (over the 64% at $115^{\circ}C$, 30 min) of the pigments in the dark at pH 2.5 was also found. In the presence of organic acid, the hyperchromic effect of red color was greatly increased in the dark at $25^{\circ}C$. Addition of metal ion, such as $Na^+,\;K^+,\;Mg^{2+},\;Ca^{2+}\;and\;Mn^{2+}$, was contributed on the stability in color at pH 2.5 throughout 20 days storage period in the dark at $25^{\circ}C$. However, $Cu^{2+}\;and\;Fe^{3+}$ caused the rapidly degradation of pigments, and $Al^{3+}$ converted red color to blueish violet. The hyperchromic effect of the red color increased, as pH decreased. Therefore, these results indicated that cherry anthocyanin pigments might be used as the potential sources of natural red colorant for foods.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.292-292
• /
• 2016

Transition metal dichalcogenides (TMDs) with a two-dimensional layered structure have been considered highly promising materials for next-generation flexible, wearable, stretchable and transparent devices due to their unique physical, electrical and optical properties. Recent studies on TMD devices have focused on developing a suitable doping technique because precise control of the threshold voltage ($V_{TH}$) and the number of tightly-bound trions are required to achieve high performance electronic and optoelectronic devices, respectively. In particular, it is critical to develop an ultra-low level doping technique for the proper design and optimization of TMD-based devices because high level doping (about $10^{12}cm^{-2}$) causes TMD to act as a near-metallic layer. However, it is difficult to apply an ion implantation technique to TMD materials due to crystal damage that occurs during the implantation process. Although safe doping techniques have recently been developed, most of the previous TMD doping techniques presented very high doping levels of ${\sim}10^{12}cm^{-2}$. Recently, low-level n- and p-doping of TMD materials was achieved using cesium carbonate ($Cs_2CO_3$), octadecyltrichlorosilane (OTS), and M-DNA, but further studies are needed to reduce the doping level down to an intrinsic level. Here, we propose a novel DNA-based doping method on $MoS_2$ and $WSe_2$ films, which enables ultra-low n- and p-doping control and allows for proper adjustments in device performance. This is achieved by selecting and/or combining different types of divalent metal and trivalent lanthanide (Ln) ions on DNA nanostructures. The available n-doping range (${\Delta}n$) on the $MoS_2$ by Ln-DNA (DNA functionalized by trivalent Ln ions) is between $6{\times}10^9cm^{-2}$ and $2.6{\times}10^{10}cm^{-2}$, which is even lower than that provided by pristine DNA (${\sim}6.4{\times}10^{10}cm^{-2}$). The p-doping change (${\Delta}p$) on $WSe_2$ by Ln-DNA is adjusted between $-1.0{\times}10^{10}cm^{-2}$ and $-2.4{\times}10^{10}cm^{-2}$. In the case of Co-DNA (DNA functionalized by both divalent metal and trivalent Ln ions) doping where $Eu^{3+}$ or $Gd^{3+}$ ions were incorporated, a light p-doping phenomenon is observed on $MoS_2$ and $WSe_2$ (respectively, negative ${\Delta}n$ below $-9{\times}10^9cm^{-2}$ and positive ${\Delta}p$ above $1.4{\times}10^{10}cm^{-2}$) because the added $Cu^{2+}$ ions probably reduce the strength of negative charges in Ln-DNA. However, a light n-doping phenomenon (positive ${\Delta}n$ above $10^{10}cm^{-2}$ and negative ${\Delta}p$ below $-1.1{\times}10^{10}cm^{-2}$) occurs in the TMD devices doped by Co-DNA with $Tb^{3+}$ or $Er^{3+}$ ions. A significant (factor of ~5) increase in field-effect mobility is also observed on the $MoS_2$ and $WSe_2$ devices, which are, respectively, doped by $Tb^{3+}$-based Co-DNA (n-doping) and $Gd^{3+}$-based Co-DNA (p-doping), due to the reduction of effective electron and hole barrier heights after the doping. In terms of optoelectronic device performance (photoresponsivity and detectivity), the $Tb^{3+}$ or $Er^{3+}$-Co-DNA (n-doping) and the $Eu^{3+}$ or $Gd^{3+}$-Co-DNA (p-doping) improve the $MoS_2$ and $WSe_2$ photodetectors, respectively.

• Journal of the Korean Chemical Society
• /
• v.55 no.3
• /
• pp.478-485
• /
• 2011

Merocyanine derivatives transformed from spiropyran-containing compounds by irradiating the light of ultraviolet (UV) include zwitterion of phenolate anion and amine cation. Complexation of this phenolate anion on merocyaninemodified surface and Ni ion among metal ions led to a change of surface charge and it was measured with kelvin prove force microscopy (KFM). We found that the resultant surface potential decreased linearly as UV-exposed time increased, and finally were saturated. Also it was analyzed through XPS the immobilized amount of Ni ions was increased according to increase of UV-exposed time. It is considered that these properties could be applied for detection and a quantitative control of different metal ions. Further research is to aim construct specific scaffold/matrix which enable high selective, high sensitive and, especially, a quantitative immobilization of metal ions-binding biomaterials such as proteins and cells.

• Korean Journal of Microbiology
• /
• v.45 no.4
• /
• pp.419-424
• /
• 2009

To provide the basis of biosensor based on the lux genes from bioluminescent bacteria of Photobacterium leiognathi and Vibrio harveyi, we test the expression of lux genes in several strains of Escherichia coli. The expression of the recombinant plasmid of PlXba.pT7-3, containing all lux genes requiring for light emission without adding substrate, in E. coli 43R was so strong to see the blue-green light in single colony as well as in the alginate immobilized cell. In addition, the light intensity was decreased by adding heavy metal ion such as cadmium and zinc ions. These result raise the possibility that a biosensor can be developed using the lux genes system.

• Korean Journal of Food Science and Technology
• /
• v.26 no.1
• /
• pp.93-97
• /
• 1994

A study of physical and chemical characteristics of pigments from Rhodopseudomonas viridis DSM 133 was carried out for development of natural greenish colorant. Through visible absorption scanning, it showed three main absorption peaks at 378, 414 and 677 nm with three minor peaks at 510, 540 and 618nm, and it was shown to be greenish color. These pigments were more stabilized in alkaline solutions than in acid of between pH 6 and 9, and it was shown to be stabilized at the temperature below $40^{\circ}C$. In the presence of light and oxygen, the stability of pigments rapidly degraded, and it became unstable in the presence of metal ion such as $Fe^{3+}$ and $Al^{3+}$. But in the presence of $Cu^{2+}$ were very stable. On the result of TLC analysis, pigments were shown to be composed of four color fractions and main color fractions were F-4 and F-2.

• Journal of the Korean Chemical Society
• /
• v.17 no.3
• /
• pp.154-162
• /
• 1973

The rates and activation parameters for the halide $(Cl^{-}, Br^{-}, I^{-})$TeX> exchange reactions of substituted benzenesulfonyl-chloride, $XC_6H_4SO_2Cl$(X:p-MeO, H, p-Cl, p-Br, p-NO$_2l$) in dry acetone at two temperatures have been determined. It was found that the ion-pair of metal halide,$M^{+}X^{-}$, have negligible reactivity compared to free halide ions. It was also found that the nucleophilic order is $Cl^{-}>Br^{-}>I^{-}$for electron-donating substituent, and $Cl^{-}>I^{-}>Br^{-}$ for electron-withdrawing substituents. These results and convex nature of the Hammett plot are interpreted in the light of simple $S_N2$mechanism with the bond breaking becoming important for compounds with the electron withdra-wing substituents.