• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.5
• /
• pp.276-283
• /
• 2017

A polysilicon-based metal-semiconductor-metal (MSM) photodetector was fabricated by means of our new methods. Its photoresponse characteristics were analyzed to see if it could be applied to a sensor system. The processes on which this study focused were an alloy-annealing process to form metal-polysilicon contacts, a post-annealing process for better light absorption of as-deposited polysilicon, and a passivation process for lowering defect density in polysilicon. When the alloy annealing was achieved at about $400^{\circ}C$, metal-polysilicon Schottky contacts sustained a stable potential barrier, decreasing the dark current. For better surface morphology of polysilicon, rapid thermal annealing (RTA) or furnace annealing at around $900^{\circ}C$ was suitable as a post-annealing process, because it supplied polysilicon layers with a smoother surface and a proper grain size for photon absorption. For the passivation of defects in polysilicon, hydrogen-ion implantation was chosen, because it is easy to implant hydrogen into the polysilicon. MSM photodetectors based on the suggested processes showed a higher sensitivity for photocurrent detection and a stable Schottky contact barrier to lower the dark current and are therefore applicable to sensor systems.

• The Korean Journal of Mycology
• /
• v.21 no.3
• /
• pp.165-171
• /
• 1993

The effects of the iron ions for the light-induced mitochondrial $F_0F_1-ATPase$ of Lentinus edodes was studied. The enzyme activity was stimulated up to 202% by 0.1 mM $Fe^{2-}$ ion, but was inhibited by $Fe^{3+}\;and\;Mg^{2+}$. In the presence of 0.5 mM $Mg^{2+}$, the activity also increased 32% by 0.1 mM $Fe^{2+}$ ion, and decreased to a similar extent by $Fe^{3+}$ ion than by only $Fe^{3+}$ ion. Also, the activity was inhibited 53% by 5.0 mM $Fe^{2-}$ ion in the presence of 0.5 mM $Mg^{2+}$ ion and various concentration of $Fe^{3+}$ ion(mM). These results showed that $Fe^{2+}$ strongly stimulated the enzyme activity and its role for the enzyme was independent of $Mg^{2+}$ ion, but was dependent of $Fe^{3+}$ ion. From inactivation of the enzyme by addition of metal chelating agent, EDTA, it is suggested that the enzyme is to be metalloenzyme. The optimal pH and temperature of the enzyme in the presence of 0.1 mM $Fe^{2+}$ was 7.6 and $63^{\circ}C$, respectively.

• Korean Journal of Soil Science and Fertilizer
• /
• v.28 no.2
• /
• pp.114-122
• /
• 1995

Complexation experiment between humic acid and heavy metal cations was conducted to clear information on heavy metal adsorption by soil organic constituent. The absorbance of UV-visible light of humic acid-metal complexes increased with increasing wavelength, and the order of their absorbance was in the order of Zn->Cd->Cu- saturated humic acid. Carboxyl and phenolic OH groups participated in the complex formation between heavy metal cations and functional groups of humic acid, and the amounts complex was in the order of $Cu^{+{+}}$ > $Zn^{+{+}}$ $\geq$ $Cd^{+{+}}$. The stability constants of humic acid-metal complexes increased with increasing pH, and the order of first stability constants was $Zn^{+{+}}$ > $Cd^{+{+}}$ > $Cu^{+{+}}$, and those of second and overall stability constants were $Cu^{+{+}}$ > $Zn^{+{+}}$ > $Cd^{+{+}}$. With increasing pH, the average binding numbers betwen heavy metal cations and functional groups of humic acid increased the order of $Cu^{+{+}}$ > $Zn^{+{+}}$ > $Cd^{+{+}}$. It was postulated that two types of complexations between heavy metal cations and functional groups of humic acid. One was the reactions in which only carboxyl groups participated to form complexes, and the other was those in which both carboxyl and phenolic OH groups simultaneously participated.

• Archives of Pharmacal Research
• /
• v.9 no.4
• /
• pp.211-214
• /
• 1986

A simultaneous determination method of alkaline earth metals was attempted with the conventional high performance liquid chromatographic system. Four cations, namely, magnesium, calcium, strontium and barium ion, were injected directly as aqueous solution into an eluent containing copper chloride solution and and were successfully separated and determined on a separating column (Zipax SCX, 4.6 mm i.d. ${\times}25$ cm length, Du Pont, USA) by using a variable wavelength UV detector. The linear calibration curves were obtianed in the range from $1.0{\times}10^{-4}M$ to $5.0{\times}10^{-4}M$ and the correlation coefficient of the calibration curve for each metal of magnesium and calcium in tap water. Alkaline earth metals were determined with the conventional high performance liquid chromatographic system.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.1
• /
• pp.101-105
• /
• 2004

The laser ablation/ionization time-of-flight mass spectrometry is applied to the isotopic analysis of solid samples using a home-made instrument. The technique is convenient for solid sample analysis due to the onestep process of vaporization and ionization of the samples. The analyzed samples were lead, cadmium, molybdenum, and ytterbium. To optimize the analytical conditions of the technique, several parameters, such as laser energy, laser wavelength, size of the laser beam on the samples surface, and high voltages applied on the ion source electrodes were varied. Low energy of laser light was necessary to obtain the optimal mass resolution of spectra. The 532 nm light generated mass spectra with the higher signal-to-noise ratio compared with the 355 nm light. The best mass resolution obtained in the present study is ~1,500 for the ytterbium.

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.2
• /
• pp.265-268
• /
• 2008

Among the efforts to increase the efficiency of organic light-emitting device (OLED), there is a way: doping phosphorescent materials. As a phosphorescent material, complexes of heavy transition metal, platinum, were synthesized. $Cl^-$ ion and phenyl group were used as ancillary ligands with 2-(2-pyridyl)benzimidazole (pbi) as a chromophore. The complexes were analysed by FAB-mass spectrometer and absorption and emission spectra were obtained. A phenyl group was able to shift the emission band of the complex even if it's not a chromorphore.

• Journal of the Korean institute of surface engineering
• /
• v.52 no.6
• /
• pp.334-341
• /
• 2019

Organometal halide perovskite materials have attracted much attention in the photovoltaic and light emitting devices due to the compositional flexibility with AMX₃ formula (A is an organic amine cation; M is a metal ion; X is a halogen atom). The addition of homovalent or heterovalent metal cations to the bulk organohalide perovskites has been performed to modify their energy band structure and the relevant optoelectronic properties by ligand-assisted ball milling. Here, we report CH₃NH₃Pb_1-xM_xBr₃ nanocrystals substituted by metallic cations (M is Sn²⁺, In³⁺, Bi³⁺; x = 0, 0.01, 0.02, 0.05, 0.1, 0.2). Photoluminescence and quantum yield was significantly reduced with increasing metallic cations content. These quenching effect could be resulted from the metal cations that behave as a non-radiative recombination center.

• The Korean Journal of Mycology
• /
• v.15 no.4
• /
• pp.224-230
• /
• 1987

Effects Of organic compound, photosensitizer and $K^+$ ion influx. On the light-induced ATPase of mitochondria in L. edodes purified by linear sucrose density gradient centrifugation were studied. The mitochondrial ATPase activity was investigated by various wavelength illumination at dark state. The mitochondrial ATPase was activated 139% and 128% by 10m mol dithiothreitol and 0.1m mol quinacrine, respectively. This enzyme also was activated 36% by 0.1m mol phenazine methosulfate as photosensitizer. But, 100 mg oligomycin and 1m mol phlorizin inhibited activity of enzyme to 48% and 45%, respectively. Its optimum wavelength was 690 nm on the effect of $K^+$ ion influx, its optimum pH and temperature were found to be 7.2 and $55^{\circ}C$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.567-567
• /
• 2013

Surface plasmon resonance is the enhancement of electromagnetic wave caused by oscillation on the metal and dielectric interfaces. Surface plasmons with nanohole arrays provides an enhancedresonance for the specific wavelengths of interests. Asymmetric array of nanoscale structures can enable orientation dependent shift of resonance wavelengths when combined with the control of polarization for incident visible light, thus providing color tunability. Appropriate lattice constants along the direction of polarization in rectangular nanohole arrays can determine the resonance condition generating red (R), green (G), and blue (B) colors and potentially be applied to display applications. In ourprevious report, we have optimized the ion beam nanomachining conditions to fabricate the nanostructures on the metal film. We apply the fabrication conditions to make nanoscale hole arrays using 100 nm thick gold layer on the glass substrate with the optimal design of periodicities along x, y, and diagonal directions of a=440 nm, b=520 nm, c=682 nm, and the hole diameter of d=200 nm. Using the reflective light in dark field mode of optical microscope, we can observe different colors. When the polarizer is paralleled along a, b, or c direction, the represented color is changed to R, G, and B, respectively. We further map the color using i1 to correlate the conditions of the nanohole arrays with their characteristic color.

• Korean journal of food and cookery science
• /
• v.32 no.3
• /
• pp.325-332
• /
• 2016

Purpose: The purpose of this study was to investigate the stability of anthocyanin pigment extract from Yangha (Zingiber mioga ROSC). Methods: Yangha extract was investigated for the effects of metal ion, temperature, light, heating time, sugars, and organic acids on the stability of anthocyanin pigments. Results: Yangha pigment was more stable than other anthocyanin pigments at unstable temperatures. The stability of anthocyanin pigment significantly decreased one day after exposure to light. All tested sugars decreased the abundance of Yangha pigments, with highest levels in the presence of sucrose, and progressive decrease in the presence of maltose, fructose, glucose and galactose, in order. Among the organic acids tested, citric acid and malic acid were the most effective in stabilizing the Yangha pigment, followed by acetic acid and formic acid. Most metal ions except $Fe^{2+}$ were effective in stabilizing the pigment. Conclusion: These results provide useful reference data for the use of pigments from Yangha in processed foods.