• 조명전기설비학회논문지
• /
• 제25권2호
• /
• pp.126-130
• /
• 2011

Transparent conductive oxide (TCO) is an important part in the construction of dye-sensitized solar cells (DSCs) because of its low sheet resistance, sufficient light transparent ability and high photoelectrical response as a porous photo-electrode material of DSCs. However, the use of TCO for the two DSC electrodes can result in significant cost increase for the less effective DSCs compared to Si based solar cell. Therefore, the replacement of TCO is required for the commercial production of DSCs. In this study, TCO electrodes are replaced by stainless steel mesh. The 3.44[%] efficiency of the prepared TCO-less DSCs sample was obtained.

• 전기학회논문지
• /
• 제60권8호
• /
• pp.1479-1484
• /
• 2011

The existing leg-rest for transmission line construction was established on the ground as a structure. As a result of that, it caused some problems such as, a tremendous forest damage, excessive construction costs and the long time of construction period. In order to solve these problems, we suggest the protective net for an air installation. It is a new method of construction which has a dielectric strength with a light-weight and high-strength. And it's not influenced by a geographical feature. This excellent method doesn't affect a forest and can reduce tremendously the construction cost and period.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 춘계학술대회
• /
• pp.845-848
• /
• 2013

오늘날 국내외적으로 심각한 기후변화로 인하여 안정적인 식량 확보를 위한 수단으로써, 1년 내내 계획적 식물재배가 가능한 공장형 식물공장의 필요성이 크게 증대 되고 있다. 또한, 도시 내 빌딩에서도 설치 운영 가능한 식물공장은 단위 면적당 생산성을 크게 향상 시키며, 유통 비용 절감과 제품신선도를 유지할 수 있는 장점을 갖는다. 이런 빌딩형태의 식물공장에는 태양광을 대신하는 인공조명이 필수적이다. 식물 공장용 인공광원으로 요즘, 에너지 효율이 높고 재배 식물에 적합한 최적의 파장을 선택적으로 공급 할 수 있는 LED(Light Emitting Diode) 조명이 각광 받고 있다. 본 논문에서는 유비쿼터스 센서 네트워크를 기반으로 원격에서 재배 식물에 최적인 환경을 제공하기 위한 시스템에 대해 기술하였다. LED 조명과 $CO_2$, $O_2$, 온도, 습도, 조도센서, 색상센서들은 설치 및 유지 보수가 쉽도록 지그비(ZigBee) 네트워크로 구성하였으며, 이더넷 게이트웨이를 통해 인터넷에 연결되도록 하였다. 또한 식물 공장은 특성상 좁은 실내 환경에 많은 수의 LED 조명들이 밀집되어 설치 운영된다. 이런 운영 환경을 감안하여 LED 제어를 위한 데이터의 송수신에는 유선과 무선 네트워크를 혼용함으로써 무선 노드들의 데이터 전송 트래픽 부담을 줄일 수 있도록 하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.2050-2055
• /
• 2009

This paper describes the proceeding experimental results to replace the 32 [W] fluorescent lamp installed in subway train to a LED module. We fabricated 25 [W] LED modules to meet the illuminance 300 [lx] specified in the standard for subway train. After the installation of LED modules, comparative analysis with conventional fluorescent lamps was carried out. From the experimental results, illuminances on the height of 0.85 [m] and 1 [m] above floor were 323 [lx] and 360 [lx], respectively. These illuminances satisfied the requirement 300 [lx]. By the application of 25 [W] LED module as a light source in subway train, energy saving about 22 [%] compared with 32 [W] fluorescent is acquired. Also, low cost of maintenance is expected due to 8 times longer lifetime 50,000 hours of LED than that 6,000 hours of fluorescent lamp.

• International journal of advanced smart convergence
• /
• 제12권4호
• /
• pp.458-463
• /
• 2023

This study presents a paper on the implementation of a Raspberry Pi-based educational smart farm system. It confirms that in a real smart farm environment, the control of temperature, humidity, soil moisture, and light intensity can be smoothly managed. It also includes remote monitoring and control of sensor information through a web service. Additionally, information about intruders collected by the Pi camera is transmitted to the administrator. Although the cost of existing smart farms varies depending on the location, material, and type of installation, it costs 400 million won for polytunnel and 1.5 billion won for glass greenhouses when constructing 0.5ha (1,500 pyeong) on average. Nevertheless, among the problems of smart farms, there are lax locks, malfunctions to automation, and errors in smart farm sensors (power problems, etc.). We believe that this study can protect crops at low cost if it is complementarily used to improve the security and reliability of expensive smart farms. The cost of using this study is about 100,000 won, so it can be used inexpensively even when applied to the area. In addition, in the case of plant cultivators, cultivators with remote control functions are sold for more than 1 million won, so they can be used as low-cost plant cultivators.

• 한국태양에너지학회 논문집
• /
• 제24권2호
• /
• pp.1-7
• /
• 2004

In this paper, the new improved method for photovoltaic system was studied available for a lighting load by measuring the state of charge of lead-acid batteries. Photovoltaic systems has been evaluated as one of the most new and renewable energy and especially, the Stand-Alone Photovoltaic system has been used to a street light, a road sign light, an air caution light, an emergency call. Many Stand-Alone PV system are installed by a group. Although the pre-installation cost of PV system is high and it has not been operated due to the absence of optimal management standards. In this paper, it is proposed a new operating method by the measurement of lead-acid battery's SOC with a Ah balancing.

• 드라이브 ㆍ 컨트롤
• /
• 제20권4호
• /
• pp.123-132
• /
• 2023

In disaster situations, to facilitate rapid drainage, electric underwater pumps are installed manually. This poses a high risk of electric shock accidents due to a short circuit, and a lot of time is required for hose connection and installation of electrical devices. To solve these problems, a Venturi pump using the venturi effect without external power is used. However, Venturi pumps that operate without external power make it difficult to install flow sensors such as electric devices; consequently, it is difficult to check the real-time flow rate. This paper proposes a flow estimation logic to replace the function of the flow sensor for the venturi pump . To develop the flow estimation logic, the flow characteristics of the venturi pump, according to the operating conditions, were checked. After that, the relationship with the flow rate of the venturi pump was defined using a pressure sensor corresponding to a low-cost sensor. Finally, an analysis of the estimation error was performed using the developed flow estimation logic.

• 한국컴퓨터정보학회논문지
• /
• 제29권5호
• /
• pp.85-91
• /
• 2024

본 논문은 레저스포츠 시장이 활성화되면서 총기를 활용한 활동이 늘어나고 있으며, 군대에서는 비용이 많이 드는 사격 훈련을 진행하고 있는 상황에서 저렴한 비용을 실외에서 훈련할수 있는 시스템을 연구했다. 이러한 고비용의 훈련을 저렴하게 대체하기 위해 가상 현실을 활용한 사이버 스크린이 연구되고 있다. 본 연구에서는 기존의 스크린 사격 훈련 시스템의 문제점인 어두운 공간과 높은 설치 비용을 최소화하기 위해 대형 디스플레이 장치에서도 사용할 수 있는 시스템을 제안한다. 이를 위해 전면에 IR 리시버를 부착하고 IR 건을 활용하여 훈련하는 시스템을 구축하고, 애플리케이션을 통해 사용성과 효율성을 확인했다. 또한, 영점 조절 기능을 추가하여 더 정확한 좌표를 인식할 수 있도록 했다. 이를 통해 낮은 비용으로도 사이버 라이트 건 시스템을 쉽게 활용할 수 있을 것으로 기대된다.

• 조명전기설비학회논문지
• /
• 제18권6호
• /
• pp.31-36
• /
• 2004

본 논문에서는 인체에 무해하며 고분해능의 단층영상과 저가격 및 소형으로 제작이 가능하여 전세계적으로 많은 연구가 진행중인 광영상 단층촬영기(Optical coherence tomography system : OCT)의 분해능 향상에 관한 것이다. 고분해능 단층영상을 얻기 위하여 펨토초 레이저를 이용한 OCT 시스템을 구성하였다. 펨토초레이저의 펄스폭을 측정하기 위하여 자체상관법(Autocorrelator function)를 이용하여 펄스폭을 측정하였으며, 이론식과 기준시편을 이용한 측정으로 실제 분해능을 측정하였다. 또한 SLD(superluminescent diode) 광원과의 비교분석을 통해 분해능이 약 1.5배 향상됨을 확인하였으며 단층영상 비교의 경우 보다 선명한 단층영상을 얻을 수 있을 것이다.

• 조명전기설비학회논문지
• /
• 제29권10호
• /
• pp.65-72
• /
• 2015

Recently, LED light has been increasingly adopted for vehicles in both domestic and foreign automotive markets, while a variety of LED lights have been developed to be used particularly for headlamps. In this paper, we propose an H-type resonant snubber circuit topology for high efficiency of vehicle LDM (LED Driver Module) and realized LDM functions for vehicle headlamp by designing high-efficiency convertors. In addition, this study reduced the financial burden by configuring the system to control the whole with micom except for the use of individual dedicated chips to drive LED for high and low beam. In order to verify the validity of the proposed H-type resonant snubber capable of soft switching, simulations were performed using PSIM. As a result, the validity was experimentally verified by creating a prototype. Moreover, in order to actually attach the headlamp, the performance of the proposed convertor was confirmed by designing LDM to the limited size. Communications between the headlamp and higher controller were realized using LIN(Local Interconnect Network).