• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.780-783
• /
• 2004

The two-dimensional modeling of the non-stationary thermal state and voltage responsivity of the sensitive elements usually used in solid-state pyroelectric focal plane arrays are presented. Temperature distributions under periodical thermal excitation and the response of the thermal imaging device, which is composed of the pyroelectric sensitive elements mounted on a single silicon substrate, are numerically calculated. The sensitive element consists of a covering metal layer, infrared polymer absorber, front metal contact, sensitive pyroelectric element, the interconnecting column and the bulk silicon readout. The results of the numerical modeling show that the thermal crosstalk between sensitive elements to be critical especially at low frequency (f < 10Hz) of periodically modulated light. It is also shown that the use of our models gives the possibility to improve the design, operating regimes and sensitivity of the device.

• KIEAE Journal
• /
• v.2 no.4
• /
• pp.11-20
• /
• 2002

The purpose of this study is to suggest environment-friendly assessment elements for the apartment unit plan. For this, the organizing environments of a unit are classified through literature review. Those were five categories of environment: environment of solar system, light, water, green and indoor air Quality. Then, the assessment elements for each categorized environment to evaluate the environment-friendly performance were grasped definitely by examining the applicability of architectural methods or equipment technology. It is expected to suggest not only an assessment tool for evaluation but also a checklist for design in order to develope environment-friendly apartment unit plans.

• Analytical Science and Technology
• /
• v.36 no.6
• /
• pp.259-266
• /
• 2023

The demand for rare-earth elements (REEs) is increasing owing to their significance as prominent materials in electronics, high-tech industries, geological research, nuclear forensics, and environmental monitoring. In general, the utilization of REEs in various applications requires the use of chromatographic techniques to separate individual elements. However, REEs have similar physicochemical properties, which makes them difficult to separate. Recently, several studies have examined the separation of REEs using LN resin as the stationary phase and aqueous nitric acid and hydrochloric acid solutions as eluents. Using this method, light REEs have been separated using dilute acid solutions as the eluent, whereas heavy REEs are separated using solutions with high acid concentrations. To increase the separation resolution between different REEs, either the column length or resin size is changed. In addition, the suggested methods are implemented to decrease the analysis time. This review presents technical information on the chromatographic separation of REEs using the LN resin and discusses the optimal experimental conditions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.744-747
• /
• 2005

The exploitable efficiency of UHP is very important in a projection system. We always use lens array for light shaping and energy distribution transformation in conventional projection system. Because of the limitation of arc gap and F/# of elements, the utilize efficiency is always dismal. In this paper we try to bring out a new method to reduce the sparkle formed on the PS converter and enhance the system efficiency.

• The International Journal of Costume Culture
• /
• v.3 no.3
• /
• pp.212-222
• /
• 2000

This study intends to observe how the essential elements of art have changed Human's sense of beauty extending over the whole lives as well as fashion through the investigation of Light and Rays which have played a important role in giving birthe to the new trend of art within the upheaval age of various cultures. The peculiarities of which Futurism of Italy and Rayonism of Russia including Impressionism have a great role in giving birth to a new trend of art by means of the development of science technology are like these. Impressionists looked for the origin of the subtle harmony in nature within changes of sun-rays. The special feature of Impressionism paintings was to express the line of vision diversely according to changes of light rather than to focus on the line of vision with clear outlines. Henceforth, Neo-Impressionism which developed Impressionism more systematically leaded changes of Light and Rays more systematically and scientifically and maintained Divisionnisme techniques which extends to lead towards color and light through dividing and juxtaposing color. In the early 20th century Futurists tried to express dynamism through the interpenetration of light and revive color and light through the division techniques of color and persist an artificial light like eletricity rather than a natural light. Rayonism of Russia which was ifluenced from Impressionism and Futurism maintained intersection of reflecting rays which emerges from an object of things more deeply. This pursuit of light and rays also light and rays also appears as it is in modern fashion. First, it is the fashion which applied sun-rays persisted by Impressionists and expressed colors which show differently according to direction of light. Second, it is the fashion design which re-analyzed what Futurists expressed artificial light and rays. Third, it is the design which expressed Divisionnisme theory persisted by Impressionists and Futurists into fashion as it is and was made of being divided the form of glittering light into small dots. Fourth, it is the fashion design which applied Rayonists'work which applied intersection of reflected rays. Like this, it is aproved that the pursuit of light and rays expresses as it is in modern fashion of the 21st.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.3 no.5
• /
• pp.423-443
• /
• 2009

We present the design and implementation of a unique sensing and actuation application -- the Illuminator: a sensor network-based intelligent light control system for entertainment and media production. Unlike most sensor network applications, which focus on sensing alone, a distinctive aspect of the Illuminator is that it closes the loop from light sensing to lighting control. We describe the Illuminator's design requirements, system architecture, algorithms, implementation and experimental results. The system uses the Illumimote, a multi-modal and high fidelity light sensor module well-suited for wireless sensor networks, to satisfy the high-performance light sensing requirements of entertainment and media production applications. The Illuminator system is a toolset to characterize the illumination profile of a deployed set of fixed position lights, generate desired lighting effects for moving targets (actors, scenic elements, etc.) based on user constraints expressed in a formal language, and to assist in the set up of lights to achieve the same illumination profile in multiple venues. After characterizing deployed lights, the Illuminator computes optimal light settings at run-time to achieve a user-specified actuation profile, using an optimization framework based on a genetic algorithm. Uniquely, it can use deployed sensors to incorporate changing ambient lighting conditions and moving targets into actuation. Experimental results demonstrate that the Illuminator handles various high-level user requirements and generates an optimal light actuation profile. These results suggest that the Illuminator system supports entertainment and media production applications.

• Journal of Astronomy and Space Sciences
• /
• v.13 no.1
• /
• pp.72-78
• /
• 1996

We evaluated the orbital elements of BV light curves of a short period RS CVn type eclipsing binary system UV Picsium that shows complication light variation, by analyzing with the Winson-Devinney's differential correction method. Because the analyzed light curves shows large light variation at outside eclipse region, we assumed spotted region of the primary component and calculated its position and size. The results show the UV Psc is a detached binary system of nearly the same radii and the primary component has high mass with high temperature. However this result is not consistant with customary stellar models, thus requires more observational data to confirm this problem.

• Nuclear Engineering and Technology
• /
• v.38 no.5
• /
• pp.443-448
• /
• 2006

The OPAL (Open Pool Australian Light-water) reactor is currently being constructed to replace HIFAR (HI-Flux Australian Reactor, commissioned in 1958) in mid-2006. HIFAR will be shutdown for decommissioning after several months of simultaneous operation with OPAL for smooth transition of operating systems and business. OPAL is a 20 MW multipurpose research reactor for radioisotope production, irradiation services and neutron beam research. The OPAL reactor uses low enriched uranium fuel in a compact core, cooled by light water and moderated by heavy water, yielding maximum thermal flux not less than $4{\times}10^{14}ncm^{-2}s^{-1}$. The reactor containment building is constructed of reinforced concrete and has been designed to protect the reactor from all external events such as seismic occurrences and impact from a hypothetical light aircraft crash. This paper describes the main elements of the reactor design and its applications.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2017.10a
• /
• pp.63-66
• /
• 2017

All passenger ships aboard more than 36 passengers are to be able to easily find escape routes when the escape way by fire with flame spread were onboard vessel (incl. Ferry, Passenger, Ro-pax, Inland Ferry) It should be impossible by ordinary emergency lights. The international Maritime Organization (IMO) gives special requirement for luminescent evaluation onboard test procedure and applicable location of low location lighting. In order to maintain the residual light source for a certain time in the low location lighting with a strip-shaped light source, the light source material must be sufficiently exposed to the light due to the proper placement of the escape route. The lighting arrangement influence how maintain low location lighting strip luminescent which measured onboard in connection with what elements are mainly sustain luminescent.

• Current Optics and Photonics
• /
• v.5 no.5
• /
• pp.506-513
• /
• 2021

An arrayed diffractive optical element design for the beam-shaping of a multi-array light source is proposed. This is an essential device for recent optical security and face recognition applications. In practice, we devise a DC noise reduction technique featuring high fabrication error tolerance regarding the multi-array light source diffractive optical elements, as a necessary part of the proposed design method. The spherical diverging illumination leads to DC-conjugate noise spreading. The main idea is tested experimentally, and the multi-array light source diffraction pattern is investigated numerically.