• Journal of Fashion Business
• /
• v.2 no.1
• /
• pp.71-75
• /
• 1998

The Miaos who is the minority people mainly living in the southwestern part of China, expressed their indicator and solidarity through the costume in order to maintain their racial character while experiencing numerous adversities over thousands of years, where the costume has served as a source of cohesion as well as a primitive religious thought, and also showed their faith, desire, longing and aspiration. This study examined the Miao's traditional costume by classifying it into the following; hair style, headdress, upper and lower garments, and other costume. And the silver ornaments used for attire and their symbolic meaning were examined. The result of the study is summarized as follows. 1. The reason that types of the costume has been diversified is because there was promise of ancestors who intended to differently express the type of a kind as symbol of the racial branch that is the Miao's special type of society. Thus, the costume type could tell where a tribe live. Another reason is because only marriage between families with different surname but the same type of costume was accepted. 2. As women made and wore the costume themselves, it also served as a means of being proud of their skill or wealth, they tried to make it more beautiful and it was also used as a token of marriage or love between relatively enlightened men and women. 3. The design used on the costume was expressed as a symbolic meaning of indicator to strengthen the racial solidarity because it connoted worship to ancestors who had experienced lots of adversities. 4. The hair style was expressed in various styles by using Kache such as Chukye, Byunbal and Kokye. It is likely that ornaments used on the head of women in the form of cow's horn or silver crown were used as one of the methods to stress the valuableness of the cattle that were essential to agricultural life. In addition, various styles of turbans were used to indicate the respective regions. 5. Cock's feather ornaments or silver ornaments in the form of pheasant's feather on the edge of women's skirts, peasant's feathers that men wore on their head, or Baekjoui and men wore resulted from the Miaos' thought of adoration for birds, which implied a primitive religious meaning. 6. As the region where the Miaos live yields much silver, the silver ornaments were mostly used to be proud of wealth, which symbolized light and pureness.

• Journal of the Korean Society of Costume
• /
• v.35
• /
• pp.17-44
• /
• 1997

Medieval European practical art and style of costume is studied through referring to the literatures. The type of clothing that was seen on tapestries arts and crafts paintings and wall paintings and appeared in the architecture such as church. There were symbolic aspects of color motifs at this period and some restraints for clothing according to the social class, It was a period that draped garments due to the War of Crusades is appeared. Be-cause the medieval taste and decorative character is not only 'formative art' but also the taste beyoud 'mode' and atomsphere of that times it could be seen the strong reflec-tion of customs in the clothing of that times which is shown in works of art. 1) The purpose of Christian art which was found in mosaics stained glasses wall pain-tings and statues of architecture was not just the revival of natural phenomena but visuali-zation of sacred and invisible things. It was valuable to understandin of the spiritual through the sense organ It was a monumental art that was combined with decorative func-tion and role of the Bible. It revealed what was about the religious spiritual miracle, 2) In the medieval European painting characteristic and beautiful creativity was the basis of an argument. Both "Worship of East-ern" that is painted ion a parchment and "Cor-onation of Charles VI" were described decor-ation motifs on the edge of buildings geo-metric patterns and others with outstanding skill. there were precise technologic skill of architect and glassmen and lots of patience of craftsmen. " The Labour of the Months" and the scene of"A Trial at the Court" is also de-scribed elaborately. 3) Tapestry was developed in France Ger-many Swiss at the 14th century. Religionary and historical themes unicorn lady bird flowering plants and others were major motifs. It was very important as decorative wall coverings and as practical door arch and bed hangings. It was made through patient hard work with simple technique and it was con-sidered as an art for practical use. Tapestry was what everyone wish to have. It is reckoned for the item of the best gift. The royalty and nobility ordered and used custom-made tapestries. Sometimes the subject of motifs consisted of series which were deeply related to living 4) Decorative arts and crafts was the art that used materials such as precious metals jewels and others and that accorded with the luxurious and gorgeous taste of the royalty and nobility. Christian considered splendid and beautiful color of light as a symbol of glory. They used also for church appliances, There were metal crafts wood crafts textile crafts and others, As was stated above the costume appeared on the arts and crafts for living revealed the process of changes saw how the politic econ-omic and social organizations were developed.and social organizations were developed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.397-397
• /
• 2013

The electrical, electronic, optical properties and the local structure of Nickel Oxide (NiO) thin film have been investigated by X-ray photoelectron spectroscopy (XPS), Reflection Electron Energy Loss Spectroscopy (REELS), UV-spectrometer,Hall Effect measurement and X-ray absorption spectroscopy (XAS). The XPS results show that the Ni 2p spectra for all films consist of $Ni2p_{3/2}$ at around 854.5 eV which indicate the presence of Ni-O bond from NiO phase and for the annealed film at temperature above $200^{\circ}C$ shows the coexist Ni oxide and Ni metal phase. The REELS spectra showed that the band gaps of the NiO thin films were abruptly decreased with increasing temperature. The values of the band gaps are consistent with the optical band gaps estimated by UV-Spectrometer. The optical transmittance spectra shows that the transparency of NiO thin films in the visible light region was deteriorated with higher temperature due to existence of $Ni^0$. Hall Effect measurement suggest that the NiO thin films prepared at relatively low temperatures (RT and $100^{\circ}C$) are suitable for fabricating p-type semiconductor which showed that the best properties was achieved at $100^{\circ}C$, such as a low resistivity of $7.49{\Omega}.cm$. It can be concluded that the annealing process plays a crucial role in converting from p type to n type semiconductor which leads to reducing electrical resistivity of NiO thin films. Furthermore, the extended X-ray absorption fine structure (EXAFS) spectrum at the Ni K-edge was used to address the local structure of NiO thin films. It was found that the thermal treatments increase the order in the vicinity of Ni atom and lead the NiO thin films to bunsenite crystal structure. Moreover, EXAFS spectra show in increasing of coordination number for the first Ni-O shell and the bond distance of Ni-O with the increase of substrate temperature.

• Journal of the Korean Institute of Gas
• /
• v.18 no.6
• /
• pp.27-31
• /
• 2014

This paper presents a study on the strength safety of the weak parts at Part 1, Part 2 and Part 3 in the valve structure for LPG cylinder by using the finite element method. The maximum Von Mises stress of 27.5MPa was occurred at the corner edge of a valve Part 1 for the valve thickness of 1.5mm and LPG pressure of 3.5MPa. And the maximum Von Mises stresses for the valve thickness of 1.5mm and LPG pressure of 3.5MPa were 41.5MPa at Part 2 and 46.5MPa at Part 3. The FEM computed results show that the maximum Von Mises stresses at Part 1, Part 2 and Part 3 are very low value of 9.2~15.5% compared with the yield strength of a copper alloy, C3604. This means that the valve thickness for LPG cylinder is so over designed for the conventional valve. Thus, this paper recommends that the thickness at Part 1 and Part 2 is reduced for a light weight of a copper valve. But, the thickness at Part 3 may be better for a thick valve as a conventional valve for high torque strength.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.4
• /
• pp.274-279
• /
• 2009

To determine the critical level for optimum maturity of flue-cured tobacco leaves (KF118) at the stalk position from cutter to tips, the reflectance index using ground-based remote sensors and chlorophyll meter were investigated. The sensors estimated were Crop $Circle^{TM}$ (Holland Scientific), Green $Seeker^{TM}$ (Ntech Industries), Spectroradiometer (LICOR, LI-1800), Chlorophyll meter (SPAD502, Minolta), and Field $Scout^{TM}$ Chlorophyll meter (CM-1000, Spectrum). The L, a, b values and greenness for flue-cured leaf were measured and estimated for correlation with sensor's measurement of harvested leaf. On a reflectance curve of 340nm~1100 nm, the reflectance peaks on 550nm and 675 nm for the harvested leaf were lowered as change from light green to darker green. Darker green leaf harvested produced darker flue-cured leaf. The reflectance at 675 nm for flue-cured leaf decreased as greenness increased in the harvested leaf. This result means that the red edge band of 675 nm wavelength is related to the absorbance of chlorophyll for photosynthesis. The greenness of flue-cured leaf showed significantly positive correlation with the entire reflectance indexes for harvested leaf while the L value by colorimeter showed negative correlation with greenness of cured leaf. The critical level for optimum maturity of harvested leaf were less than 22, 135, and 0.43 for SPAD reading, CM-1000 reading, and gNDVI by Crop $Circle^{TM}$, respectively. Consequently, ground-based remote sensing providing a non-destructive real-time assessment of plant greenness could be a useful tool in the selection of optimum maturity of flue-cured tobacco leaves in relation to high quality of flue-cured tobacco.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.2
• /
• pp.211-220
• /
• 1998

The stochiometric composition of $AgGaS_2$polycrystal source materials for the single crystal thin films were prepared from horizontal furnace. From the extrapolation method of X-ray diffraction patterns, it was found that the polycrystal $AgGaS_2$has tetragonal structure of which lattice constant $a_0\;and \;c_0$ were 5.756 $\AA$ and 10.305 $\AA$, respectively. $AgGaS_2$single crystal thin film was deposited on throughly etched GaAs(100) substrate from mixed crystal $AgGaS_2$by the Hot Wall Epitaxy (HWE) system. The source and substrate temperature were $590^{\circ}C$ and $440^{\circ}C$ respectively, and the growth rate of the single crystal thin films was about 0.5 $mu \textrm{m}$/h. The crystallinity of the grown single crystal thin films was investigated by the DCRC (double crystal X-ray diffraction rocking curve). The optical energy gaps were found to be 2.61 eV for $AgGaS_2$single crystal thin films at room temperature. The temperature dependence of the photocurrent peak energy is well explained by the Varshni equation, then the constants in the Varshni equation are given by${\Alpha};=;8.695{\times}10^{-4};eV/K,and;{\beta};=;332;K$. from the photocurrent spectra by illumination of polarized light of the $AgGaS_2$single crystal thin film, we have found that crystal field splitting $\Delta$Cr was 0.28 eV at 20 K. From the PL spectra at 20 K, the peaks corresponding to free and bound excitons and a broad emission band due to D-A pairs are identified. The binding energy of the free excitons are determined to be 0.2676 eV and 0.2430 eV and the dissociation energy of the bound excitons to be 0.4695 eV.

• Korean Journal of Cleft Lip And Palate
• /
• v.4 no.1
• /
• pp.1-11
• /
• 2001

Disposable blade is widely used for palatal and oral mucosal incision in oral and maxillofadal surgery nowadays, But its design and durability need for improvement, Especially, there are so many hard tissues intraoral area, such as bone and tooth, therefor the sharpness of the surgical blade was easily destroyed, The purpose of this study was to make basic data for developing new design of surgical blade using in oral and maxillofacial area including for the patients who have cleft lip and palate deformities, Some questionnaires about the usefulness of currently used surgical blades were sent to 150 dentists, the 54 of them made a reply, Secondly, The used-once blade and fresh new blade were examined under the scanning electron microscope with the 4000-times magnification, Lastly, the tissue reaction following the surgical incision with a fresh-new and a used blade on rat buccal cheek mucosa and hard palate was evaluated with light microscope with hematoxilin-eosin staining, The time interval from the surgical trauma to taking a sample were 1 day, 3 days, 7 days, and 14 days, At each time schedule, 2 Sprague-Dawley rats were sacrificed, Many dentists were agreed to need for changing the design of the surgical blades and also demand to improve the durability of the blades, They were also eager to adopt the new design of blade if it was available, The blade used in surgical extraction procedure was heavily damaged in its sharpe edge of number 15 blade, The histological differences were not prominent, but the delayed healing was detected in buccal mucosal defects especially in the surgical group with used blade, There are slight different changes in hard palatal defects between a used and a new blade group, In this study, we could find that there are imperative demanding on improvement of surgical blade design and durability for oral and maxillofadal area, The blade currently using in surgical extraction was easily damaged, The animal model of this study was not perfect for the purpose of this study.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.1
• /
• pp.135-141
• /
• 2018

In this paper, we describe design and implementation of optimal smart home control system. Recent developments in technologies such as sensors and communication have enabled the Internet of Things to control a wide range of objects, such as light bulbs, socket-outlet, or clothing. Many businesses rely on the launch of collaborative services between them. However, traditional IoT systems often support a single protocol, although data is transmitted across multiple protocols for end-to-end devices. In addition, depending on the manufacturer of the Internet of things, there is a dedicated application and it has a high degree of complexity in registering and controlling different IoT devices for the internet of things. ARIoT system, special marking points and edge extraction techniques are used to detect objects, but there are relatively low deviations depending on the sampling data. The proposed system implements an IoT gateway of object based on OneM2M to compensate for existing problems. It supports diverse protocols of end to end devices and supported them with a single application. In addition, devices were learned by using deep learning in the artificial intelligence field and improved object recognition of existing systems by inference and detection, reducing the deviation of recognition rates.

• 한국해양학회지
• /
• v.5 no.1
• /
• pp.37-40
• /
• 1970

This work concerns age studies of the spanish mackerel by vertebrae. The spanish mackerel samples were obtained mainly from Yosoo and Inchon regions during July to December, 1969. A total of 292 fish was collected during the present study. Except the vertebrae, the incremental growth is found to be vague or complicated on the most bony parts in spanish mackerel. The spanish mackerel has 50 vertebrae, and the size of vertebra varies according to its position. After several studies, therefore, sample centrum was selected from the 23rd vertebra throughout the present study. Sample centrum was then stained with Alizarin Red S. and examined under binocular stereoscopic microscope illuminated by reflected light. The surface of the centrum shows many ring-marks running parallel to the edge. The ring-marks were counted and the measurements of centrum radius (R) and radii of the ring-marks (r$\_$i/) were made by eyepiece micrometer. From available data, the average of each ring-mark radius was found to be; r$\_$1/=2.05mm, r$\_$2/=3.11mm, r$\_$3/=4.05mm, r$\_$4/=4.89mm, r$\_$5/=5.70mm and r$\_$6/=6.47mm, respectively. The mean fork length at the time of ring-mark formation was calculated to be; l$\_$1/=297.6mm, l$\_$2/= 390.1mm, l$\_$3/=472.2mm, l$\_$4/=545.5mm, l$\_$5/=616.2mm, and l$\_$6/= 683.4mm, respectively.

• The Journal of the Korea Contents Association
• /
• v.13 no.11
• /
• pp.477-491
• /
• 2013

In order to live up to public expectations, universities dedicate their best efforts to cultivating all Essential Competencies for outstanding individuals, especially reorganizing and improving their general education curricula and methods of teaching and learning, in light of the fact that a cutting-edge technology in a specific field does not bear a long span in the modern society. Through a Grounded Theory approach, the aim of this research is to study undergraduates' Experience Process of Action Learning designed to foster their Essential Competencies. With broadly selected 15 students from the courses for Essential Competencies, the method of theoretical sampling was employed so as to secure the diversity of the subjects' characteristics and backgrounds. After in-depth interviews, the data from the subjects were analyzed on the basis of Grounded theory approach of Strauss and Corbin. The conclusions of this analysis are as follows; Firstly, a learning coach should play a different role depending on the levels of Action Learning. Secondly, some time for introspection should be taken for the effective operation of Action Learning. Thirdly, learners ought to solve the problems faced during the learning process on their own. Fourthly, the aims of courses for Essential Competencies are also needed to be focused.