• 한국안광학회지
• /
• 제10권1호
• /
• pp.1-8
• /
• 2005

색각 이상자의 색지각은 색 이미지의 색 공간 변환을 사용하여 가능하다. 적록 색각이상자에게, G채널를 극대화(+100)한 경우, G채널를 최소화(-100)한 경우, R채널만 극대화(+100)한 경우, R 채널을 CIE $L^*a^*b^*$ 색 공간에서 $b^*$ 좌표의 (-)값인 황색(Y) 채널로 변환 시킨 경우, B채녈(청)과 G채널(록)로 만 분리하고 다시 명암차로 나타낸 경우, RGB 채널 변환 및 채도를 분리시킨 후 명암만으로 이미지를 얻는 경우 등에 의해 색지각이 가능하다.

• 패션비즈니스
• /
• 제9권5호
• /
• pp.136-144
• /
• 2005

Oxidative hair color is currently widely used because of its beautiful light color and good dyeability. In this study, hair color, oxidative agents, and dye intermediate were reacted. Modifier, which changes color with various hue, and alkaline agent, which opens the cuticle of hair fiber and enhances the dyeing reaction, were added. For gel formation, isocetyl alcohol was used as solvent in preparing three kinds of permanent oxidative hair color. Physiochemical study of prepared permanent oxidative hair color was done for basic information acquisition. Acid perspiration test, pH measurement both at room temperature and at high temperature, drop movement test, dyeability efficiency upon the amount of hydrogen peroxide added, and humidity fastness were studied. Shampoo fastness and light fastness of prepared permanent oxidative hair color dyed hair sample were also investigated. All three kinds of hair color prepared showed good properties overall, however, dyed hair sample became reddish upon shampoo fastness and lightfastness tests.

• 한국염색가공학회지
• /
• 제23권4호
• /
• pp.241-249
• /
• 2011

Cotton fabrics was treated with persimmon juice by padding and their dyeability and functionality were assessed including antibacterial activity and deodorization ratio. The merit of padding-based dyeing was easier color reproduction over traditional hand dyeing where various colors and color fastness to light and laundering are hard to obtain. With larger number of padding, the dyed fabrics showed deeper red-yellow colors, which had low brightness and high chromatic colors. The dyed cotton fabrics had a perspiration fastness of 4~5 rating, a rubbing fastness of 3~4 rating, and a washing fastness of 4 rating, As the number of padding and exposed time to sunlight or UV light increase, the values of K/S and ${\Delta}E$ increased and the colors became much deeper gradually. The color development had completed about 70 hours exposure to UV. Among the light sources, the dyed fabrics exposed to UV light showed deeper yellow-red color than those of exposed to sunlight. The cotton fabrics treated with premordants like Al, Cr, Cu, and Sn revealed strong yellow colors, especially the fabrics treated with Fe mordant showed greenish red-yellow colors. As the padding times of dyeing with persimmon juice increased, stiffness and water repellent property were enhanced in warp and weft directions, respectively. Also, the dyed fabrics have good antibacterial activity and deodorization.

• 제어로봇시스템학회논문지
• /
• 제21권12호
• /
• pp.1122-1129
• /
• 2015

This paper suggests a method of detecting traffic lights for vehicles by combining the HSV(hue saturation value) color model, morphometric characteristics, and location information appearing on consecutive images in daytime. In order to detect the traffic light, the color corresponding to the signal lights should be explored. It is difficult to detect traffic lights among colors of lights from buildings, taillight of cars, leaves, placards, etc. The proposed algorithm searches for the traffic lights from many candidates using morphometric characteristics and location information in consecutive images. The recognition process is divided into three steps. The first step is to detect candidates after converting RGB channel into HSV color model. The second step is to extract the boundaries between the housing of traffic lights and background by exploiting the assumption that the housing has lower brightness than the surrounding background. The last step is to recognize the signal light after eliminating the false candidates using morphometric characteristics and location information appearing on consecutive images. This paper demonstrates successful detection results of traffic lights from various images captured on the city roads.

• 한국생활과학회지
• /
• 제16권3호
• /
• pp.601-613
• /
• 2007

In this research, 128 stimuli of contrast coloration of lipstick and clothing were evaluated to the degree of harmony in the coordination of makeup and clothing color depending on the combination of eyeshadow color(brown, violet), lipstick color(red, orange, and purple), lipstick tone(vivid, light, dull, and dark), clothing style(formal, casual), and clothing tone(vivid, light, dull, and dark). Sets of stimulus and response scales were used as experimental materials. The subjects were 768 female undergraduates living in Gyeongsangnam-do. As to the brown eyeshadow, dull lipstick and light, dull clothing, vivid, dull, dark lipstick and dark clothing among the combinations of red lipstick and blue green clothing, dull lipstick and light, dull, dark clothing, dark lipstick and dull, dark clothing among the combinations of orange lipstick and purplish blue clothing were evaluated as harmonious coloration regardless of the clothing style. As to the violet eyeshadow, combinations of red lipstick and blue green clothing and combinations of red purple lipstick and yellow green clothing wide come out range of disharmony. Thus, the degree of harmony in the contrast coloration can be perceived to be different depending on how the color and tone of clothing and lipstick are coordinate.

• Journal of Information Display
• /
• 제11권3호
• /
• pp.123-127
• /
• 2010

Fluorescent white organic light-emitting diodes showing high color-rendering indices (CRIs) of up to 81 was demonstrated, with a silicon-cored anthracene derivative (PATSPA) doped with DPAVBi utilized as the deep-blue host and dye materials, and the commercial dyes rubrene and DCM2 utilized as the orange- and red-light-emitting dyes. The devices, consisting of three emissive layers, showed bright-white-light emission, but the ratio of the blue peak to the orange and red peaks changed with the current density and the thickness of the blue emissive layer. A high CRI was achieved with the use of a deep-blue emitter doped in a novel host and by optimizing the blue-layer thickness. The device with a blue-layer thickness of 10 nm showed the Commission Internationale de l'Eclairage (CIE) color coordinate of (0.33, 0.35), a high CRI of 81, and a moderate external quantum efficiency of 2% at a current density of $2.5\;mA/cm^2$.

• 한국가구학회지
• /
• 제28권3호
• /
• pp.224-232
• /
• 2017

Building energy saving have been put effort in a long time since buildings consume about 40.6% of total energy use, where heating, cooling and electrical lighting requirement results in energy consumption of building significantly. The window is an important part of building envelope, it usually brings a certain heat load from solar radiation while it allows light passing through, and properly leads to overheating in summer, hence the cooling load increase sand cause of thermal uncomfortable factor. The purpose of this study was to evaluate internal shade performance according to color and materials. There is growing interest in improving the sense of comfort among students who spend most of their time in the classroom. The study examined thermal environment and light environmental performance according to the color and materials of internal blinds to the school classroom. The results of this study were as follows; Among wooden blinds, aluminium blinds, and polyester blinds, the aluminium blinds were most excellent. In addition, among white blinds, light brown blinds, dark brown blinds, the light brown were most excellent.

• Restorative Dentistry and Endodontics
• /
• 제17권1호
• /
• pp.126-133
• /
• 1992

Tooth colored resin restorative materials are widely used in anterior teeth restorations. The color instability of resin was the main cause of failure in resin restorations. The purpose of this study was to investigate color stability and microhardness of serval visible light curing resins. Colorimetric measurements(Tokyo Denshoku Co., Japan) and microhardness tests(Matusuzawa, MXT 70, Japan) were made on six composite resins before and after controlled immersion treatments. The six composite resins were BIS - FILM(BISCO, USA), Durafill(Kulzer, Germany), Helioprogess(VIVADENT, Germany), Palfique(TOKUYAMA SODA, Japan), Silux(3M, USA), Photoclearfil(KURARAY, Japen). Six light curing resins showed significant color change after 2 weeks. Palfique exhibited the hightest $dE^*$ values and Helio progress presented the lowest $dE^*$ values. Photoclearfil showed the highest microhardness value. Durafill and Helio progress showed lower microhardness values. Microhardness values were decreased after 8 weeks in Bisfil, Palfique light, and Photoclearfil.

• 한국염색가공학회지
• /
• 제24권3호
• /
• pp.165-172
• /
• 2012

The stability of yellow and red dyes prepared from safflower (Carthamus tinctorius L.) in aqueous solution and in solid state was investigated. External factors such as light irradiation and temperature on the stability were examined during storage. Changes in absorbance of dye solutions and the color changes of fabrics dyed after long time storage were measured. Also, color reproducibility during storage was investigated by dyeing test on various fabrics. Red colorant in aqueous solution was very unstable to light, resulting that about 40% of absorbance were lost in 12hrs. The absorbance of yellow dye solutions was not decreased within 84hrs. In aqueous medium, yellow dye was much more stable than carthamin. Both dyes are relatively stable for long storage when they are stored in solid state compared to when in aqueous solution. Color changes are marginal in both dyes.

• 대한산업공학회지
• /
• 제31권1호
• /
• pp.68-78
• /
• 2005

A new emotion-based image retrieval method is proposed in this paper. The research was motivated by Soen's evaluation of human emotion on color patterns. Thirteen pairs of adjective words expressing emotion pairs such as like-dislike, beautiful-ugly, natural-unnatural, dynamic-static, warm-cold, gay-sober, cheerful-dismal, unstablestable, light-dark, strong-weak, gaudy-plain, hard-soft, heavy-light are modeled by 19-dimensional color array and $4{\times}3$ gray matrix in off-line. Once the query is presented in text format, emotion model-based query formulation produces the associated color array and gray matrix. Then, images related to the query are retrieved from the database based on the multiplication of color array and gray matrix, each of which is extracted from query and database image. Experiments over 450 images showed an average retrieval rate of 0.61 for the use of color array alone and an average retrieval rate of 0.47 for the use of gray matrix alone.