• International Journal of Highway Engineering
• /
• v.17 no.6
• /
• pp.105-115
• /
• 2015

PURPOSES : This study aimed to evaluate the appropriateness of safety with the standard for threshold zone luminance as specified in the Recommendation for Lighting of Traffic Tunnel, which has been widely adopted worldwide. METHODS : A driving test of the subject in a full-scale road tunnel was conducted. The adaptation luminance and threshold zone luminance, which should be known for the driver to perceive an object within stopping sight distance, were obtained. These values were compared with the adaptation luminance and threshold zone luminance obtained by the existing reduced model test and tunnel lighting standard that has served as a guideline for the current threshold zone luminance standard. RESULTS : According to this study, threshold zone luminance should be increased to at least 1.8 times the value proposed in the existing studies and to twice the domestic tunnel lighting standard (KS C 3703: 2014). CONCLUSIONS : The threshold zone luminance proposed in this study differs largely from that obtained from indoor tests and from the current tunnel lighting standard used worldwide; this difference may be attributed to the fact that the indoor tests did not incorporate driving workload, non-uniformity of luminance distribution in terms of sight, and factors that reduce the visibility of the driver, such as the light reflected into the driver's eyes. Hence, it is necessary to further review the factors that reduce the visibility of drivers approaching tunnels in order to determine the rational tunnel threshold zone luminance.

• Korean Journal of Adult Nursing
• /
• v.28 no.1
• /
• pp.71-82
• /
• 2016

Purpose: The purpose of this study was to investigate the effect of Family Resilience Reinforcement Program (FRRP) for family caregivers of the elderly with dementia on the family resilience, caregiver burden, family adaptation, perceived health status and depression. Methods: FRRP was implemented for 60 minutes each time, once a week, for 8 weeks. According to 3 factors of Walsh's Family resilience theory, FRRP was organized and specified as redefining 'belief system' in 1 to 2 sessions, figuring out one's own 'organizational pattern' in 3 to 5 sessions, enhancing 'communication process' in 6 to 8 sessions. A total of 46 family caregivers were assigned into either the experimental group with FRRP or the control group. Data were collected from February 18 to April 12, 2013 at the dementia support centers, and the data of 36 participants were finally analyzed. Results: The experimental group reported statistically significant differences in family resilience (p=.002), caregiver burden (p=.012), family adaptation (p<.001), and perceived health status (p=.002) compared to those in the control group. No significant difference was found between the two groups in depression. Conclusion: In the light of these results, FRRP is considered to decrease caregiver burden and to influence family resilience, family adaptation and perceived health status positively. The developed FRRP is considered to be an efficient nursing intervention for strengthening family resilience of the given population. It warrants future research expanding the range of target population to those caregivers of the patients with other chronic conditions.

• Animal Bioscience
• /
• v.37 no.4
• /
• pp.576-590
• /
• 2024

Objective: The objective of this study was to identify genes associated with 305-day milk yield (MY) and fat yield (FY) that also influence the adaptability of the Thai multibreed dairy cattle population to tropical conditions. Methods: A total of 75,776 imputed and actual single nucleotide polymorphisms (SNPs) from 2,661 animals were used to identify genomic regions associated with MY and FY using the single-step genomic best linear unbiased predictions. Fixed effects included herd-year-season, breed regression, heterosis regression and calving age regression effects. Random effects were animal additive genetic and residual. Individual SNPs with a p-value smaller than 0.05 were selected for gene mapping, function analysis, and quantitative trait loci (QTL) annotation analysis. Results: A substantial number of QTLs associated with MY (9,334) and FY (8,977) were identified by integrating SNP genotypes and QTL annotations. Notably, we discovered 17 annotated QTLs within the health and exterior QTL classes, corresponding to nine unique genes. Among these genes, Rho GTPase activating protein 15 (ARHGAP15) and catenin alpha 2 (CTNNA2) have previously been linked to physiological traits associated with tropical adaptation in various cattle breeds. Interestingly, these two genes also showed signs of positive selection, indicating their potential role in conferring tolerance to trypanosomiasis, a prevalent tropical disease. Conclusion: Our findings provide valuable insights into the genetic basis of MY and FY in the Thai multibreed dairy cattle population, shedding light on the underlying mechanisms of tropical adaptation. The identified genes represent promising targets for future breeding strategies aimed at improving milk and fat production while ensuring resilience to tropical challenges. This study significantly contributes to our understanding of the genetic factors influencing milk production and adaptability in dairy cattle, facilitating the development of sustainable genetic selection strategies and breeding programs in tropical environments.

• Korean Journal of Poultry Science
• /
• v.36 no.4
• /
• pp.329-335
• /
• 2009

The aim of the present study was to investigate the behavior and performance of male and female broiler chickens reared under three different colors of light (white, blue and red) in a 23L:1D of lighting program. Day-old broiler chicks were obtained and assigned to six pens (16 males and 16 females per pen). Two pens each were located in three different rooms in an environmentally controlled shed and received the different light colors. All birds received same husbandry conditions. After a 3-day adaptation to the light color, behavior observations (pecking, resting, standing and walking) were made on six focal birds per pen, representing the sex ratio, by direct visual scans for 120 minutes daily for five days a week throughout the 5-week study. Body weights and feed intake were recorded at weekly intervals. On days 19 and 33, welfare indicators (tonic immobility reaction on the 19 and 33 days old; gait scores, foot pad and hock burns scores on 33 days old) were determined. Light color had no significant effect (P>0.05) on the weight gain and feed intake of broilers, but significantly (P<0.05) influenced the feed conversion ratio. Birds receiving the blue light were more (P<0.05) efficient than those receiving white and red lights. Resting was observed to be the major behavior pattern, irrespective of sex or light color. During early growth, resting behavior tended to be lower in birds receiving red light. However, standing and walking behaviors tended to be higher in birds receiving red light in 4 to 18 day-old age and all of experimental periods, respectively. These data indicate that light color can influence broiler performance and behavior.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.4 no.1
• /
• pp.52-56
• /
• 2001

Experiment was performed to investigate the effect of light intensity on growth and flowering status of Korean native Dianthus superbus var. longicalycinus, Sedum middendorifianum, Hemerocallis aurantiaca, Iris ensata var. spontanea and Aquilegia buergeriana var. oxysepola for effective landscaping. Number of floret and flower stalk per a plant were markedly increased under full sun(about 100,000lux), and decreased with decreasing light intensity in all tested plants. This result indicate that it will be cultivated in the open for promote landscaping values. However, leaf area and plant height were more increased under half sun(22,000lux) than open(100,000lux) or shade(7,700lux) in all plants except Sedum middendorifianum. Especially, Hemerocallis aurantiaca had same number of shoot and leaf size, even if planted under shade condition to show a wide adaptation to various light intensities.

• Korean Journal of Environmental Biology
• /
• v.27 no.1
• /
• pp.82-87
• /
• 2009

In order to characterize the ecological traits of Quercus acutissima, Q. variabilis and Q. mongolica, which dominated in Korean mountain, we treated the sapling of the three oak species under the major environment factors (light, soil moisture and nutrient) with four gradient levels, for 8 months in glass house. Then we measured and analyzed the growth difference among them. The growth of Q. acutissima and Q. variabilis were increased with higher light intensity, but there is no apparent trend in Q. mongolica for light gradients. Q. mongolica did not show high reduction of growth, even in the lowest light intensity. Q. variabilis and Q. mongolica had a constant growth state to soil moisture treatment, but only Q. acutissima grew well in higher soil moisture gradient condition. All the growth of three oak species decreased with higher nutrient gradient condition. The growth reduction was increased in order of Q. variabilis, Q. mongolica and Q. acutissima. with increased nutrient gradient level. These results means that Q. mongolica, Q. acutissima and Q. variabilis have adaptation ability to shade, high moisture and low nutrient condition, respectively.

• Restorative Dentistry and Endodontics
• /
• v.20 no.1
• /
• pp.303-315
• /
• 1995

An adequate and homogeneous cure of light-activated restroative material is very important for improvement of marginal adaptation and prevention of marginal leakage, secondary caries and pulpal irritation as well as expressing natural physical property of that material. The purpose of this study was to evaluate the change of surface hardness and cure uniformity of light-activated glass ionomer cements. Restorative(Fuji II LC, Vitremer) and lining(Baseline VLC, Vitrebond) light-activated glass ionomer cements were investigated for this study. The surface hardness of the top and bottom surfaces and cure uniformity of each 1mm, 1.5mm, 2mm, 2.5mm & 3mm in the thickness of specimen were measured immediately, at 1 hour, 24 hours and 1 week after light activation. The surface hardness change and cure uniformity of all the specimens were measured by Knoop hardness tester. The results were as follows. 1. The surface hardness of top and bottom surfaces in all groups increased with time(p<0.01). 2. Both top and bottom surfaces hardness of Vitrebond group measured immediately after light-activation were significantly lower than those of the other groups(p<0.01). 3. The surface hardness of top and bottom surfaces of restorative light -activated glass ionomer cements was higher than those of lining materials at 1 week(p<0.10). 4. Surface hardness of Vitremer group decreased as the specimen thickness increased, except top and bottom surfaces hardness of the specimen at 1 week(p<0.01). There was no significant difference in the surface hardness of Fuji II LC with changes in the thickness except bottom surface hardness of specimen at 24 hours and 1 week (p>0.05). 5. Surface hardness of Vitrebond group significantly decreased as the specimen thickness increased(p<0.01). There was no significant difference in the surface hardness of Baseline VLC group with changes in the thickness except bottom surface hardness of specimen measured immediately after light -activation(p>0.05). 6. The hardness ratio of top against bottom surface in all groups decreased with time(p<0.05). 7. There was no significant difference in the hardness ratio of top against bottom surface with changes of the thickness except Vitrebond group, 24 hours and 1 week of Vitremer group and 1 week of Baseline VLC group (p>0.05). These results suggest that surface hardness of restorative ligh-activated glass ionomer cements were highter than those of lining light-activated materials. In all groups, the surface hardness and cure uniformity continuously increased with time.

• Journal of Intelligence and Information Systems
• /
• v.17 no.3
• /
• pp.43-61
• /
• 2011

In this research, we propose a dynamic decision making using social context based on ontology. Dynamic adaptation is adopted for the high qualified decision making, which is defined as creation of proper information using contexts depending on decision maker's state of affairs in ubiquitous computing environment. Thereby, the context for the dynamic adaptation is classified as a static, dynamic and social context. Static context contains personal explicit information like demographic data. Dynamic context like weather or traffic information is provided by external information service provider. Finally, social context implies much more implicit knowledge such as social relationship than the other two-type context, but it is not easy to extract any implied tacit knowledge as well as generalized rules from the information. So, it was not easy for the social context to apply into dynamic adaptation. In this light, we tried the social context into the dynamic adaptation to generate context-appropriate personalized information. It is necessary to build modeling methodology to adopt dynamic adaptation using the context. The proposed context modeling used ontology and cases which are best to represent tacit and unstructured knowledge such as social context. Case-based reasoning and constraint satisfaction problem is applied into the dynamic decision making system for the dynamic adaption. Case-based reasoning is used case to represent the context including social, dynamic and static and to extract personalized knowledge from the personalized case-base. Constraint satisfaction problem is used when the selected case through the case-based reasoning needs dynamic adaptation, since it is usual to adapt the selected case because context can be changed timely according to environment status. The case-base reasoning adopts problem context for effective representation of static, dynamic and social context, which use a case structure with index and solution and problem ontology of decision maker. The case is stored in case-base as a repository of a decision maker's personal experience and knowledge. The constraint satisfaction problem use solution ontology which is extracted from collective intelligence which is generalized from solutions of decision makers. The solution ontology is retrieved to find proper solution depending on the decision maker's context when it is necessary. At the same time, dynamic adaptation is applied to adapt the selected case using solution ontology. The decision making process is comprised of following steps. First, whenever the system aware new context, the system converses the context into problem context ontology with case structure. Any context is defined by a case with a formal knowledge representation structure. Thereby, social context as implicit knowledge is also represented a formal form like a case. In addition, for the context modeling, ontology is also adopted. Second, we select a proper case as a decision making solution from decision maker's personal case-base. We convince that the selected case should be the best case depending on context related to decision maker's current status as well as decision maker's requirements. However, it is possible to change the environment and context around the decision maker and it is necessary to adapt the selected case. Third, if the selected case is not available or the decision maker doesn't satisfy according to the newly arrived context, then constraint satisfaction problem and solution ontology is applied to derive new solution for the decision maker. The constraint satisfaction problem uses to the previously selected case to adopt and solution ontology. The verification of the proposed methodology is processed by searching a meeting place according to the decision maker's requirements and context, the extracted solution shows the satisfaction depending on meeting purpose.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.5
• /
• pp.391-396
• /
• 2013

Recently, microcavity is studied to reduce the optical loss of BLU and OLED. In this paper, we suggest applying microcavity to photo-luminescent lamp with plasma discharge technology to meet the display applications for a BLU for LCD. The structure of photo-luminescent lamp consists of SUS foil and ITO glass with microcavity. The opto-electric characteristics of photo-luminescent lamp with microcavity was evaluated. The brightness of photo-luminescent device was increased over $111cd/m^2$ with the adaptation of patterned microcavity at $30{\mu}m$. The 3D optical simulation verified the enhanced light outcoupling when microcavity applied to the device.

• Journal of Korean Society of Steel Construction
• /
• v.14 no.5 s.60
• /
• pp.665-674
• /
• 2002

The back-to-back and box-shaped headers used in light gauge steel structures have some disadvantages, i.e., construction efficiency and cost competitiveness. As such, cold-formed steel L-shaped headers have been developed and are used actively in advanced nations. However, this system has not been used in Korea because of inadequate investigation and adaptation efforts and lack of application example. Thus, this research evaluated the structural performance of L-header using buckling analyses and bending tests. Test results were compared using the AISI design criteria. Test results showed that local buckling and distortional buckling governed buckling behavior in gravity loads and uplift loads, respectively. These results were consistent with the calculated nomial strengths using the AISI design criteria.