• Ocean Systems Engineering
• /
• 제5권3호
• /
• pp.181-198
• /
• 2015

An OSV (Offshore Support Vessel) is being used to install a structure which is laid on its deck or an adjacent transport barge by lifting off the structure with its own crane, lifting in the air, crossing splash zone, deeply submerging, and lastly landing it. There are some major considerations during these operations. Especially, when lifting off the structure, if operating conditions such as ocean environmental loads and lifting off velocity are not suitable, the collision can be occurred due to the relative motion between the structure and the OSV or the transport barge. To solve this problem, this study performs the physics-based simulation of the lifting off step while the OSV installs the structure. The simulation includes the calculation of dynamic responses of the OSV and the structure, including the collision detection between the transport barge and the structure. To check the applicability of the physics-based simulation, it is applied to a problem of the lifting off step by varying the ocean environmental loads and the lifting off velocity. As a result, it is confirmed that the operability of the lifting off step are affected by the conditions.

• 대한토목학회논문집
• /
• 제31권6D호
• /
• pp.811-818
• /
• 2011

굴삭기는 삽날(shovel)을 이용해서 토공작업을 하는 장비로 분류되어 있으나, 실질적으로는 굴착을 한 후 물체를 인양하여 옮기는 작업에 이용되고 있다. 이러한 관점에서 인양력은 굴삭기의 주요성능으로 분류될 필요가 있으며, 정확한 성능을 제공할 필요가 있다. 하지만 국내 현실은 아직 이러한 요구를 충족시켜 주지 못하고 있다. 본 연구에서는 1) 외국의 굴삭기 인양력에 대한 조사를 실시하여 국내 도입을 위한 기초자료로 활용하고자 하였다. 2) 인양력에 대한 정보 없이 국내에서 사용중인 굴삭기에 적용할 수 있는 인양력 산정방법을 제안하고 이를 검증해 보았다. 3) 인양 가능한 구간을 인양안전구간과 인양주의구간으로 나누어 제공할 것을 제안하였다. 본 연구에서 제시한 굴삭기의 인양력 정보와 인양구간에 관한 정보는 작업계획 및 안전관리업무에 객관적이고 실질적인 기저정보로서 활용될 수 있을 것이다.

• Ocean Systems Engineering
• /
• 제6권4호
• /
• pp.377-400
• /
• 2016

Dropped objects are among the top ten causes of fatalities and serious injuries in the oil and gas industry (DORIS, 2016). Objects may accidentally fall down from platforms or vessels during lifting or any other offshore operation. Proper planning of lifting operations requires the knowledge of the risk-free zone on the sea bed to protect underwater structures and equipment. To this end a three-dimensional (3D) theory of dynamic motion of dropped cylindrical object is expanded to also consider ocean currents. The expanded theory is integrated into the authors' Dropped Objects Simulator (DROBS). DROBS is utilized to simulate the trajectories of dropped cylinders falling through uniform currents originating from different directions (incoming angle at $0^{\circ}$, $90^{\circ}$, $180^{\circ}$, and $270^{\circ}$). It is found that trajectories and landing points of dropped cylinders are greatly influenced by the direction of current. The initial conditions after the cylinders have fallen into the water are treated as random variables. It is assumed that the corresponding parameters orientation angle, translational velocity, and rotational velocity follow normal distributions. The paper presents results of DROBS simulations for the case of a dropped cylinder with initial drop angle at $60^{\circ}$ through air-water columns without current. Then the Monte Carlo simulations are used for predicting the landing point distributions of dropped cylinders with varying drop angles under current. The resulting landing point distribution plots may be used to identify risk free zones for offshore lifting operations.

• 한국건설관리학회논문집
• /
• 제18권2호
• /
• pp.58-70
• /
• 2017

초고층 건축공사에서 리프트카를 이용한 자재 양중 관리는 핵심적인 관리분야 중 하나이다. 기존 연구들은 양중계획의 기본 단위인 양중 사이클타임이나 리프트카의 운행효율은 기존 사례를 참고하여 적용하거나 관리목표로 설정하고 개략적으로 산정하는 한계가 있었다. 따라서 본 연구에서는 양중 사이클타임을 단축하고 가동율을 향상시키기 위하여 자재 양중작업 프로세스를 최적화하는 방법론 제안을 목표로 하였다. CYCLONE 모델을 변형하여 작업시간과 작업위치를 반영할 수 있도록 개선하고, 세부 작업을 조정하여 프로세스를 최적화 하는 방법론을 제안하였다. 이 방법론에 따라 양중작업 프로세스를 개선하고 민감도 분석과 현장 적용성 평가를 실시하였으며 초고층 현장에 적용하였다. 기존 작업 프로세스와 개선된 작업 프로세스를 양중 높이별로 시뮬레이션하고 이를 현장 적용 결과 데이터와 비교하여 양중작업 시간 단축과 가동율 향상 정도를 비교 분석하여 최적화 방법론의 효용성을 검증하였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2007년도 제34회 KOSCO SYMPOSIUM 논문집
• /
• pp.69-75
• /
• 2007

In this study, the difference of flame stability zone for natural gases from producing districts was studied experimentally using a new type of flame stability diagram. The similarity of stable flame zone between a domestic appliance and an interchangeability test(IT) burner is also examined. As a result, the stable flame zones expressed by limits curves of flame lifting and yellow tipping show the similar results in a domestic gas range and IT burner. Furthermore, IT burner can reproduce the flash back phenomena and show the distinct difference of fuel type as the burner diameter is increased. To suggest the new type of flame stability diagram in the respect of fuel interchangeability, the air flowrate and Wobbe fuel flowrate were adopted as axis coordinates. It can be identified that the new diagram can provide the useful information on the difference of flame stability zone, heat input rate and air-fuel ratio when a fuel is altered to other fuels under the identical operating conditions. Finally, the stable flame zones for natural gas of 6 type are compared, and the detailed information to use as the interchangeability fuels of standard natural gas is provided using the new type of flame stability diagram.

• 한국생활과학회지
• /
• 제18권3호
• /
• pp.793-798
• /
• 2009

Hair cut is one of the best useful technical tool for hair styling. In this study using the rule of the layers of hair design, balanced for visual art, perceptual ability and form created by the principles of analysis and offer hair cuts and hair design of the representation of regions and even hair design as the basis of a student of Hair Beauty and all the people working in the field can create a variety of hair design puts the purpose to establish a basis. The result of this study can be outline as follows: First, the step line and the movement of the relationship between the law of the layers above and below the length of the same layer techniques, the same consists of a vertical cross-section of the overall round shape of the cut same layer is created and the appropriate volume and movement, the movement of low-layer round a little bit more feeling and expression is used when you want. High-layer used to want to move a lot of light and could see that. Second, the layer of the Law and over direction, lifting, section, the line control. weight control and analyzed by principle and the principle of the process of forming the written form was unknown. Third, hair design, the expansion of the expressive power of the law of the layers, and the section of the over direction depends on the presence of line control to express the length of the outline I had to, lifting the weight to adjust form controls, and the expression of Hair Design will be expanding the width. A hair designer, a layer style to create a zone he thought the law of the first layer formative area To further the reach will be a lot of research, leading up formative aspects of this research thesis do not have missing parts, or as a result of the Beauty of Hair Design and the width of a hair design education in the field can perform to help feed the reference materials that will be.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.480-488
• /
• 2010

The CGS method is non-discharge replacement method improving ground stiffness by the effect of static compaction with injecting very low slump mortar into ground, and is applied for increasing bearing capacity and filling ground cavity by lifting or restoring differential settled structures and preventing differential settlement. This paper suggests design of ground improvement and construction case history for civil engineering structures by CGS method. This method can be used for reinforcing soft ground and liquefaction of loose sandy soil. This method was used in SongDo area in Incheon Economic Free Zone due to its low vibration of ground while it can improve the soft soil where underground structures(subway and box culvert) are already existed.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 추계 학술논문 발표대회
• /
• pp.71-72
• /
• 2016

Most of studies on PC method aim at the structural analysis and development of PC members, and studies on the construction management aspect are insufficient. Therefore, this study tries to investigate 'hallow PC column composite method(HPC composite method)' from the viewpoint of construction management and analyze the construction cost of the composite method. On the assumption that each comparative method was applied to the zone, the difference in construction cost between the two methods was analyzed. As a result, HPC composite method increased the initial investment cost because of its factor technology, but reduced transport cost, lifting cost, and installation cost through lightweight columns. This study analyzed only the difference in construction cost of HPC composite method so that it has the limitation in evaluating its economy. Therefore, to evaluate the economy of HPC composite method, it is considered to research more the construction cost of HPC composite method.

• 한국산학기술학회논문지
• /
• 제11권11호
• /
• pp.4100-4107
• /
• 2010

사고 현장에서 사고 차량을 옮기거나 주차위반 차량을 견인사업소로 이동시키기 위해 주로 이용되고 있는 리프트식 견인차는 피견인차의 구동방식에 따라 차량의 전부 또는 후부을 들어 올려 구동 바퀴로 이동할 수 있도록 하는 특수차량이다. 각 차량은 CATIA를 이용하여 모델링하고 이를 상용 유한요소해석 프로그램인 ANSYS를 통하여 피견인차의 후부를 주행 차량이 들이 받는 추돌을 시뮬레이션한다. 본 논문에서는 견인중인 견인차와 이송중인 전륜 피견인차 및 일반 주행 중인 차량 사이에서 일어날 수 있는 3중 추돌사고를 일반적인 3중 추돌사고와 비교하여 견인중에 발생하는 추돌사고가 얼마나 위험한지를 직접 확인한다. 또한 견인차가 피견인차를 들어 올려 발생되는 피견인차의 각도에 따른 추돌의 영향을 해석한다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제25권3호
• /
• pp.43-51
• /
• 2020

About 90% of groundwater wells in Jeju Island are reported to be under the threat of contamination by infiltration of the surface pollutants. Most of those wells have improperly grouted annulus which is an empty space between the well and the inner casing. As a remedy to this problem, some of the wells were re-grouted by filling the annulus with cement without lifting an inner casing. In order to evaluate whether this method is appropriate for the geological structure of Jeju Island, two wells (W1 and W2) were selected and this method was applied. The water holding capacity did not decrease while the nitrate levels decreased from 16.8 and 20.2 to 6.8 and 13.8 mg/L in W1 and W2, respectively. The higher nitrate level in W2 is deemed to be influenced by the livestock farms located in the upper area of the well. In addition, transmissivity of the vedose zone was higher in W2 than W1, potentially facilitating the transport of nitrate to the groundwater. The overall result of this study suggests re-grouting of wells for the purpose of protecting water quality of goundwater should take into account geological structure of vadose zone as well as appropriate source control of the contaminants.