• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.2
• /
• pp.352-358
• /
• 2004

This paper is studied the improvement of performance for moving picture encoder using H.263. This is used the new motion vector search algorithm using a relation with neighborhood search point and is applied the integer DCT for the encoder. The integer DCT behaves DCT by the addition operation of the integer using WHT and a integer lifting than conventional DCT that needs the multiplication operation of a floating point number. Therefore, the integer Dn can reduce the operation amount than basis DCT with having an equal PSNR. The new motion vector search algorithm is showed almost similar PSNR as reducing the operation amount than the conventional motion vector search algorithm. To experiment a compatibility of the integer DCT and the conventional DCT, according to result compare case that uses a method only and case that uses the alternate two methods of the integer DCT or the conventional DCT to H.263 encoder and decoder, case that uses the alternate two methods is showed doing not deteriorate PSNR-and being each other compatible visually than case that uses an equal method only.

• Journal of Korean Association for Spatial Structures
• /
• v.8 no.3
• /
• pp.45-51
• /
• 2008

A single layer-latticed dome is advantageous for large span structures because it is very stiff despite the light weight of the structure itself. However, this structure becomes easily unstable during erection due to its large size. The Block method is popular with the large span structures. A partial block of the dome is fabricated on the ground and lifted by crane to a designated location of structures. The lifting point selection is very important to create a stable erection and to avoid buckling of members during the erection. The purpose of this study is to analyze the structural behaviors and buckling characteristics according to the lifting point of single-layer latticed domes with triangle network in order to take materials about the safe and economic erection. The conclusions are obtained as follow. 1) The buckling strength of the block part varies with the location of lifting points when it is erected. In case, the height of the dome is lower, the effort of buckling strength of the structure is higher. 2) In buckling strength, the effect of the lifting rope length is smaller than it of the lifting points change.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.7 no.2
• /
• pp.289-297
• /
• 1997

Work-related low back pain(below LBP) is one of the major cause of morbidity, disability, limitation of activity and economic loss. Therefore the work-related LBP is one of the major issue in the field of industrial safety and health. This study was performed for detecting the risk factors and proposing the effective control programs of work-related LBP. The subjects were male workers employed at the welding and metal factory. The data was collected by self-reported questionnaire, interview and checking abdomen muscular and grasping power for two days on October, 1993. The contents of questionnaire were as follow: the experience of LBP, general characteristics, physical characteristics, employment status, type of work and working environment. The number of cases was 104 with a history of work-related LBP, so the prevalence of work-related LBP was 35.0%, and the number of controls was 140 without any history of LBP. As a result, marital status, educational level, abdomen muscular power, tenure, category of job, satisfaction of job, working posture, satisfaction for table and chair and lifting materials showed a statistical significance between the case and control groups. 284 Lifting jobs were quantified by NIOSH lifting equation method and ergonomic computer modelling methods. There were no significant differences in the action limit and disc compression force between group with LBP and without LBP. But in the lifting frequency and cumulative disc compression force there were significant differences. Therefore work-related LBP should be prevented by the ergonomic and environmental control.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.24 no.2
• /
• pp.29-36
• /
• 2018

Background: The purpose of this study was to investigate the effect of leg lift difference on serratus and upper trapezius when exercising in a scapula in a prone position, a typical waist stabilization exercise for subjects with a winged scapula. Method: Twenty normal adults and 20 subjects with winged scapula participated in the experiment. The surface EMG recordings were obtained from external oblique muscle and internal oblique muscle during scapula protraction exercise. The presence or absence of winging of the shoulder bone was measured using an electronic digital caliper for the distance the medial border of the scapula is lifted to the rear. In prostrate pier movement posture in both groups, both legs supporting, dominant leg lifting, and non-dominant leg lifting including the scapula protraction were conducted respectively. Results: In the results of comparison between the two groups, the dominant external oblique muscle and the non-dominant internal oblique muscle tended to increase according to the difference of the leg lifting of normal people. In the winged scapula group, internal oblique muscle showed increased muscle activity more than external oblique muscle. Conclusion: It was most effective to exercise with lifting the same position leg for strengthening the same external oblique muscle, and the opposite internal oblique muscle. Also, it is effective to exercise in prone pier movement posture for trunk stability. In addition, internal oblique muscle shows increased muscle activity in subjects with winged scapula. Therefore, appropriate adjustment of external oblique muscle and internal oblique muscle may have a positive effect on scapula dysfunction for trunk stability.

• Korean Journal of Applied Biomechanics
• /
• v.28 no.4
• /
• pp.199-205
• /
• 2018

Objective: The purpose of this study was to examine the effect of increase in barbell weight on closely related variable to the anterior cruciate ligament (ACL) injury which are knee joint kinematics, joint load, joint moment, and maximum load attainment point during snatch of the weight lifting. Method: The subjects of the study were 10 male Korean national weight lifting athletes (69 kg 5, 77 kg 5; age: $21.80{\pm}3.91yrs.$, height: $168.00{\pm}4.06cm$, weight: $75.00{\pm}4.02kg$, career: $7.8{\pm}3.99yrs.$, snatch records: $168{\pm}4.06kg$). The weight of the barbell during the snatch operation was set at 70%, 75% and 80% of the highest records for each subject studied. Results: The result obtained from the one-way repeated measure ANOVA are as follows: With increased barbell weight, the extension moment of the left knee joint was higher in the 80% condition than the 70% (p<.001). However, other variables were not statistically significant difference. According to the factor analysis of the variables related to maximum load attainment point of the ACL major injury variables, the first sub-factor was the internal shear force, the posterior shear force, the abduction moment, and the muscle activity of the VL. The second sub-factor was the extension moment of the knee joint, compressive force, adduction moment, and the third sub-factor was the muscle activity of BF. Conclusion: These results indicate that the possibility of ACL injury can be lowered when performing a stable snatch movement.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.8 s.179
• /
• pp.2100-2107
• /
• 2000

The wavelet theory is relatively a new development and now acquires popularity and much interest in many areas including mathematics and engineering. This work presents an adaptive wavelet method for a numerical solution of partial differential equations in a collocation sense. Due to the multi-resolution nature of wavelets, an adaptive strategy can be easily realized it is easy to add or delete the wavelet coefficients as resolution levels progress. Typical wavelet-collocation methods use interpolating wavelets having no vanishing moment, but we propose a new wavelet-collocation method on modified interpolating wavelets having 2 vanishing moments. The use of the modified interpolating wavelets obtained by the lifting scheme requires a smaller number of wavelet coefficients as well as a smaller condition number of system matrices. The latter property makes a preconditioned conjugate gradient solver more useful for efficient analysis.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.7
• /
• pp.344-351
• /
• 2006

The fatigue of back muscle in the repetitive lifting motion was studied using multiple parameters(FFT_MDF, RMS, 2C, NT) in this study. Recent developments in the time-frequency analysis procedures to compute the IMDF(instantaneous median frequency) were utilized to overcome the nonstationarity of EMG signal using Cohen-Posch distribution. But the above method has a lot of computation time because of its complexity. So, in this study, FFT_MDF(median frequency estimation based on FFT) algorithm was used for median frequency estimation of back muscle EMG signal during muscle work in uniform velocity portion of lumbar movement. The analysis period of EMG signal was determined by using the run test and lumbar movement angle in dynamic task, such as lifting. Results showed that FFT_MDF algorithm is well suited for the estimation of back muscle fatigue from the view point of computation time. The negative slope of a regression line fitted to the median frequency values of back muscle EMG signal was taken as an indication of muscle fatigue. The slope of muscle fatigueness with FFT_MDF method shows the similarity of 77.8% comparing with CP_MDF(median frequency estimation based on Cohen Posch distribution) method.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.4
• /
• pp.9-20
• /
• 1999

A higher order panel method based on B-spline representation for both the geometry and the velocity potential is developed for the solution of the flow around two-dimensional lifting bodies. The self-influence functions due to the normal dipole and the source are separated into the singular and nonsingular parts, and then the former is integrated analytically whereas the latter is integrated using Gaussian quadrature. A null pressure jump Kutta condition at the trailing edge is found to be effective in stabilizing the solution process and in predicting the correct solution. Numerical experiments indicate that the present method is robust and predicts the pressure distribution around lifting foils with much fewer panels than existing low order panel methods.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.3
• /
• pp.91-99
• /
• 2010

In order to strengthen RC structures, various strengthening methods have been used. Particularly, external tendon strengthening method is very popular method to strengthen damaged structures in terms of efficiency, ease, economics. In this study, improved anchorage elements using the lifting hole were proposed to strengthen PSC or RC girder without any damage. Two types of anchorage elements were proposed and these elements were applied on six RC beams. Also, three types of existing anchorage elements were applied on three RC beams. Otherwise, any anchorage element was not applied on one RC beam to used as a control beam. To analyse behavior of these elements, static load tests were carried out. Test variables were anchorage shapes, prestressing level on the steel bar and tendon profiles. Deflections, strains and modes of failure were recorded to examine the strengthening effects of the beams. Ductility index and tendon stress were analyzed by comparing cracking load, yielding load and ultimate load. As a result, proposed anchorage elements using lifting hole were superior to existing anchorage elements in terms of strengthening effect and furthermore, they showed ductile behavior based on energy method.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.5
• /
• pp.19-26
• /
• 2020

This paper proposes a framework for creating acrobatic scenes such as soccer ball lifting using various users' videos. The proposed method can generate a desired result within a few seconds using a general video of user recorded with a mobile phone. The framework of this paper is largely divided into three parts. The first is to analyze the posture by receiving the user's video. To do this, the user can calculate the pose of the user by analyzing the video using a deep learning technique, and track the movement of a selected body part. The second is to analyze the movement trajectory of the selected body part and calculate the location and time of hitting the object. Finally, the trajectory of the object is generated using the analyzed hitting information. Then, a natural object lifting scenes synchronized with the input user's video can be generated. Physical-based optimization was used to generate a realistic moving object. Using the method of this paper, we can produce various augmented reality applications.