• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 신호처리소사이어티 추계학술대회 논문집
• /
• pp.409-412
• /
• 2003

In this paper, the encoder architecture of 3-D wavelet transform based on lifting scheme is designed. Architecture, here, 3 level wavelet transform for spatial decomposition and 2 level wavelet transform for temporal decomposition is adopted with efficient computation.

• 산업경영시스템학회지
• /
• 제37권4호
• /
• pp.72-81
• /
• 2014

Even though two-hands lifting/lowering activity of manual materials handling tasks are prevalent at the industrial site, many manual materials handling tasks which require the worker to perform one-hand lifting/lowering are also very common at the industrial site, forestry, farming, and daily life. The objective of this study was to compare one-hand lowering activity to lifting activity in terms of biomechanical stress for the range of lowering heights from knuckle height to 10cm above floor level with two workload 7.5kg and 15.0kg. Eight male subjects with LMM were asked to perform lifting/lowering tasks using both a one-handed (left-hand and right-hand) as well as a two-handed technique. Spinal loading was estimated through an EMG-assisted free-dynamic biomechanical model. The biomechanical stress of one-hand lowering activity was shown to be 43% lower than that of one-hand lifting activity. It was claimed that the biomechanical stress for one-hand lifting/lowering activity is almost twice (194%) of the one for two-hands lifting/lowering activity. It was also found that biomechanical stress by one-hand lowering/lifting activity with the half workload of two-hands lowering/lifting activity was greater than that of the two-hands lowering/lifting activity. Therefore, it might be a risk to consider the RWL of one-hand lowering/lifting activity to simply be a half of the RWL of two-hands lowering/lifting activity recommended by NIOSH.

• 대한산업공학회지
• /
• 제33권1호
• /
• pp.44-51
• /
• 2007

The purpose of this study was to identify the relationship between the cumulative fatigue of trunk muscles andthe period of recovery time during repetitive lifting and lowering tasks with symmetric and asymmetric postures.Ten subjects participated in the experiment. Subjects had 1, 2, 3, 4 and 5 minutes recovery time respectivelywhile they were performing the lifting and lowering task repeatedly for 3 minutes with the weight equivalent to25% level of MVC. EMG signals from ten trunk muscles were collected and the fatigue level was analyzedquantitatively. In results, the local muscle fatigue was no longer accumulated when 5 minutes recovery time wasgiven in symmetric position. For asymmetric position, it took longer minutes to prevent the fatigue accumul-ation. Different trunk muscles indicated slightly different recovery patterns in terms of MPF (Mean Powerfrequency) value.This result would help ergonomist design the length of recovery time to control the cumulative fatigue of trunkmuscles in industry with repetitive lifting and lowering task.

• 대한인간공학회지
• /
• 제20권2호
• /
• pp.71-82
• /
• 2001

Twisting posture in lifting tasks has been identified as a risk factor of low back pain. However, it has been usually estimated in terms of compressive stress or muscular activity. Thus, this study was conducted to predict the influence on muscular fatigue during lifting simulation. Fifteen young and healthy subjects were recruited and performed isometric trunk exertions during upright standing, two-level flexions and five-level asymmetric twisting conditions. EMG signals from five primary trunk muscles in right part of body were collected during 20sec for 45 different lifting conditions. RMS(root mean square) and MPF(mean power frequency) parameters were used to analyze the EMG signals. Twisting postures were significant in right erector spinae(ERSR), right latissimus dorsi(LATR), right internal oblique(INOR) for muscular activities. Especially, when trunk was $30^{\circ}$ CCW twisting posture. ERSR and INOR activities increased respectively by 11% and 3%. Regarding the trunk muscle fatigue, we found that MPF shifts in twisting posture increased 2.3 and 2.6 times for ERSR and INOR muscles respectively. Therefore, It is probable for workers to suffer from low back disorders when they were exposed to a extreme twisting posture during prolonged lifting. This study suggests NIOSH(National Institute for Occupational Safety and Health) lifting equation needs the time-duration multiplier in addition to asymmetric multiplier.

• 대한물리의학회지
• /
• 제16권4호
• /
• pp.95-102
• /
• 2021

PURPOSE: This study examined the muscle activity of the abdominal muscle when lifting with abdominal hollowing with visual feedback and lifting with a pelvic compression belt. This study suggests how to lift an object safely in the workplace for people who bend their backs repeatedly. METHODS: The study was conducted on healthy men in their 20s and 30s. When lifting a 7kg object, lifting with abdominal hollowing with visual feedback, and lifting an object with a pelvic compression belt were performed three times in random order. The muscle activities were measured rectus abdominis (RA), external oblique (EO), internal oblique/transverse abdominis (IO/TrA) muscles, and abdominal hollowing exercises, and box lifting exercises were carried out in advance before the experiment. One-way ANOVA was used to compare muscle activities, and a Tukey HSD was used for post-analysis. The level of significance was set to .05. RESULTS: According to the study, there was no significant difference in muscle activity of the RA muscle depending on the lifting method (p > .05). There were significant differences between the EO and IO/TrA muscle (p < .05). The IO/TrA muscle activity showed the largest increase in lifting an abdominal hollowing with visual feedback (p < .05). The EO muscle activity increased in pelvic compression belt lifting (p < .05). The muscle activity was increased in RA, but there was no significant difference (p < .05). CONCLUSION: Abdominal hollowing lifting with visual feedback increases the muscle activity of the IO/TrA muscle, which is higher than normal, and affects the core stability of the body.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2003년도 학술대회지
• /
• pp.622-625
• /
• 2003

본 연구의 목적은 초고층 복합건물 공사에서 마감자재 양중횟수를 산정하는 약산식을 제안하는 것이다. 그것은 양중계획 시 효율적인 데이터로 활용될 것으로 기대된다. 마감자재 양중계획은 건물이 고층화 될 수록 더욱 더 중요해 진다. 양중횟수는 "패키기"라는 방식을 통하여 기존의 방식보다 더욱더 정확하게 산정할 수 일다. "패키지"는 마감자재별 특성을 고려하여 한번에 양중할 수 있는 마감자재별 양중형식을 고려한다는 것을 의미한다. 도출된 약산식은 기준층 바닥면적과 단위면적당 실갯수라는 두 요소를 변수로 하여 도출하였다.

• 한국전문물리치료학회지
• /
• 제16권3호
• /
• pp.16-23
• /
• 2009

The purpose of this study was to investigate the effects of a repetitive lifting task on the level of activation and median frequency of the paraspinal muscles, and to provide basic data of the maximal acceptable duration of the lifting task to avoid muscle fatigue. Ten healthy male subjects were recruited as participants and they repetitively (12 lifts/min) lifted a box ($46cm{\times}30cm{\times}30cm$, 15 kg) for 10 minutes. Electromyographic data (muscle activation and median frequency), heart rate, and Borg CR10 score were recorded at 1, 3, 5, 7, and 9 minutes after the lifting task. Electromyographic data was recorded from the elector spinalis, mutifidus, external oblique abdominis, and rectus abdominis for 1 minute. The results showed that as the repetitive lifting task progressed, the heart rate and Borg CR10 score significantly increased. In addition, activation of the muscles increased. The median frequency significantly decreased over time in the elector spinalis, mutifidus, and external oblique abdominis (right side), except for the external oblique abdominis (left side) and rectus abdominis. It is suggested that the median frequency recorded from a dynamic task is used to monitor muscle fatigue. Furthermore, the repetitive lifting task (15 kg, 12 lifts/min) should not continue for more than 3 minutes in order to avoid muscle fatigue.

• 대한정형도수물리치료학회지
• /
• 제25권1호
• /
• pp.29-36
• /
• 2019

Background: This study was conducted to investigate the effect of leg lift difference on the serratus anterior muscle and the upper trapezius muscle when a subject with winged scapula performs a scapula protraction exercise in a four-leg crawling posture. Method: Twenty normal adults and 20 subjects with winged scapula participated in the experiment. Surface EMG recordings were collected from serratus anterior muscle and back trapezius muscle during scapula protraction exercises. Scapular winging is measured with the lifting distance of scapula retraction to the back using an electronic digital caliper. In two groups of four-leg crawling posture, the two legs support, the dominant leg lifting, and the non-dominant leg lifting, including the scapula protraction, were performed. To examine the difference between groups in the variance analysis, the Bonferroni correction was used (significance level ${\alpha}=.017$). Statistical significance level ${\alpha}$ was .05. Results: There was a significant difference in serratus anterior muscle and upper trapezius muscle during push-up plus exercise in leg lifting in four-leg crawling posture, but there were no significant differences in muscle activity between serratus anterior muscle and upper trapezius muscle, and there was no significant difference according to the presence or absence of scapular winging. Conclusion: For the shoulder stability of the ipsilateral side with the serratus anterior muscle, the leg-lifting posture is effective in the four-leg crawling, and also when a subject with winged scapula chooses an exercise, lifting the ipsilateral side of leg with scapula protraction exercises at the same time may have a positive effect on scapula dysfunction.

• Safety and Health at Work
• /
• 제8권2호
• /
• pp.206-211
• /
• 2017

Background: Self-reported low back pain (LBP) has been evaluated in relation to material handling lifting tasks, but little research has focused on relating quantifiable stressors to LBP at the individual level. The National Institute for Occupational Safety and Health (NIOSH) Composite Lifting Index (CLI) has been used to quantify stressors for lifting tasks. A chemical exposure can be readily used as an exposure metric or stressor for chemical risk assessment (RA). Defining and quantifying lifting nonchemical stressors and related adverse responses is more difficult. Stressor-response models appropriate for CLI and LBP associations do not easily fit in common chemical RA modeling techniques (e.g., Benchmark Dose methods), so different approaches were tried. Methods: This work used prospective data from 138 manufacturing workers to consider the linkage of the occupational stressor of material lifting to LBP. The final model used a Bayesian random threshold approach to estimate the probability of an increase in LBP as a threshold step function. Results: Using maximal and mean CLI values, a significant increase in the probability of LBP for values above 1.5 was found. Conclusion: A risk of LBP associated with CLI values > 1.5 existed in this worker population. The relevance for other populations requires further study.

• 대한전자공학회논문지SD
• /
• 제41권11호
• /
• pp.97-104
• /
• 2004

본 논문은 JPEG2000의 손실 압축 또는 무손실 압축에 사용되어지는 9-7/5-3 리프팅 DWT필터에 대한 효율적인 VLSI 구조를 제안한다. 제안된 구조는 리프팅 DWT 연산을 위해 내부 라인 메모리만을 사용하며, 내부 처리 유닛은 1개의 곱셈기와 1개의 덧셈기의 임계경로를 갖는다. 특히 본 논문에서는 처리유닛의 수를 감소하기 위해 1레벨의 열방향을 담당하는 필터로 하여금 2레벨 이상의 행방향과 열방향 연산 모두를 처리하도록 하였다. 결과적으로 제안된 구조는 기존의 구조에 비해 작은 하드웨어 크기를 갖는다. 제안된 리프팅 DWT구조는 RTL 수준에서 VHDL로 모델링되었으며, 기능 검증 후 Altera APEX 20K FPGA로 구현되었다.