• Convergence Security Journal
• /
• v.22 no.5
• /
• pp.49-59
• /
• 2022

Cyber security in the automobile sector is a key factor in the life cycle of automobiles, and cyber security evaluation standards are being strengthened worldwide. In addition, not only manufacturers who design and produce automobiles, but also due to the nature of automobiles consisting of complex components and various parts, the safety of cybersecurity can be secured only when the implementation level of the cybersecurity management system of companies participating in the entire supply chain is evaluated and managed. In this study, I analyzed the requirements of ISO/SAE 21434 and TISAX, which are representative standards for evaluating automotive cybersecurity. Through a survey conducted on domestic/overseas company security officers and related experts, suitability and feasibility were reviewed according to priorities and industries, so 6 areas and 45 evaluation criteria were derived and presented as final evaluation items. This study is meaningful as a study in that it presented a model that allows companies participating in the automotive supply chain to evaluate the current cybersecurity management level of the company by first applying ISO/SAE 21434 and TISAX overall control processes before uniformly introducing them.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.3
• /
• pp.301-308
• /
• 2018

Anthropogenic radioactive noble gases formed by nuclear fission are significant indicators used to monitor the nuclear activity of neighboring countries. In particular, radioactive xenon, owing to its abundant generation and short half-life, can be used to detect nuclear testing, and radioactive krypton has been used as a tracer to monitor the reprocessing of nuclear fuels. Released radioactive noble gases are in the atmosphere at infinitesimal amounts due to their dilution in the air and their short half-life decay. Therefore, to obtain reliable and significant data when performing measurement of noble gases in the atmosphere, the minimum detectable activity (MDA) for noble gases should be defined as low as possible. In this study, the MDA values for radioactive xenon and krypton were theoretically obtained based on the BfS-IAR system by collecting both noble gases simultaneously. In addition, various MDA methods, confidence level and analysis conditions were suggested to reduce and optimize MDA with an assessment of the factors affecting MDA. The current investigation indicated that maximizing the pretreatment efficiency and performance maintenance of the counter were the most important aspects for Xe. In the case of Kr, since sample activities are much higher than those of Xe, it is possible to change the target MDA or to simplification of the analysis system.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.6
• /
• pp.460-466
• /
• 2009

Carbon fixation and density of crops are important to estimate carbon uptake or emission by agricultural production activities and to establish life cycle inventory of crops for assessment of climate change impact. In this study, regional carbon fixation and density in each part of 14 crops, harvest index, and ratio of aboveground to underground were investigated to estimate biomass of 14 crops in Korea by using agricultural statistics data. Biomass yield of potato was $16.5ton\;ha^{-1}$, which was the highest, and those of rice, sweet potato, and garlic were $10.5ton\;ha^{-1}$, $8.7ton\;ha^{-1}$, and $7.5ton\;ha^{-1}$ respectively. Biomass yield of Green onion was the lowest as $2.8ton\;ha^{-1}$. Carbon density of 14 crops were in the order of potato ($6.4ton\;ha^{-1}$), rice ($4.2ton\;ha^{-1}$), sweet potato ($3.4ton\;ha^{-1}$), rape ($2.9ton\;ha^{-1}$) and garlic ($2.8ton\;ha^{-1}$). Regional distribution of carbon contents for each crop mapped revealed that carbon fixation of rice, soybean, sesame, garlic, and green onion were the highest in Jeonnam province, barley, red pepper, and watermelon in Gyeongnam, perilla in Chungnam, peanut in Gyeongbuk, rape and carrot in Jeju, sweet potato in Gyeonggi, potato in Gangwon. The results can be applied for assessing life cycle inventory of crops and crop productivity using remotely sensed data.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.20 no.1
• /
• pp.26-36
• /
• 2017

Korea is preparing an offshore carbon capture, transport and storage (CCS) demonstration project which is recognized as one of important $CO_2$ reduction technologies to mitigate climate change. The offshore CCS project aims to transport, inject and store large amount of $CO_2$ into offshore geologic formation, and has a potential risk of leakage which might cause disastrous damage to human health, environment and property. Therefore, in order to ensure the safety of the offshore CCS project, a strict HSE (health, safety and environment) management plan and its implementation are required throughout the project life cycle. However, there are no HSE domestic laws or regulations applicable to CCS projects, and the related research is insufficient in Korea. For the derivation of the essential and urgent requirement in HSE management framework applicable to the offshore CCS project in Korea, we analysed the HSE management methodologies and foreign CCS HSE management guidelines and cases. First, this paper has analyzed ISO 31000, a generalized risk management principles. Second, we have investigated the HSE management practices of CCS projects in Norway and UK. Based on the analyses, we suggested the necessity of developing the HSE Philosophy and the HSE management process through the whole life cycle. Application of HSE management in early phase of an offshore CCS project will promote systematic and successful project implementation in a cost-effective and safe way.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.13 no.2
• /
• pp.163-169
• /
• 2015

In many nuclear power plant sites in Korea, high density storage racks were installed in the spent fuel pool to expand the spent fuel storage capacity. Nevertheless, the capability of the Hanbit nuclear site will be saturated by 2024. Also, 10 NPPs will reach their design life expiration date by 2029. In the case of the US, SFPI (Spent Fuel Pool Island) operated temporarily as a spent fuel storage option before spent nuclear fuels were transported to an interim storage facility or a final disposal facility. As a spent fuel storage option after shutdown during decommissioning, the SFPI concept can be expected to have the following effects: reduced occupational exposure, lower cost of operation, strengthened safety, and so on. This paper presents a case study associated with the regulations, operating experiences, and systems of SFPI in the US. In conclusion, the following steps are recommended for applying SFPI during decommissioning in Korea: confirmation of design change scope of SFPI and expected final cost, the submission of a decommissioning plan which is reflected in SFPI improvement plans, safety assessment using PSR, application of an operating license change for design change, regulatory body review and approval, design change, inspection by the regulatory body, education and commissioning for SFPI, SFPI operation and periodic inspection, and dismantling of SFPI.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.3
• /
• pp.247-255
• /
• 2011

Currently, there is database for per unit requirements of major construction materials in terms of energy consumption and $CO_2$ emission based on the input-output table published by the Bank of Korea in 2000, but no database for per unit requirements based on input-output tables was published in 2005 and 2007. The purpose of this study was to calculate the unit requirement values of major construction materials in terms of energy consumption and $CO_2$ emission generated by using the input-output tables published in 2005 and 2007. To estimate the unit requirement values, a database building method with the input-output tables was adopted by selecting 16 types of construction materials in wide use on construction sites. When the study results were compared with existing unit requirement values based on the input-output table of 2000, there were small discrepancies, from which it can be interpreted that the method used in the study is reasonable. Unit requirement values estimated based on input-output tables of 2005 and 2007 tended to decrease, and the highest value of energy consumption and $CO_2$ emission were found in the materials using cement and rebar.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.11 no.4
• /
• pp.281-291
• /
• 2013

A hypothetical repository was assumed to be located at the KURT (KAERI Underground Research Tunnel) site, and the travel times of radionuclides released from three source positions were calculated. The groundwater flow around the KURT site was simulated and the groundwater pathways from the hypothetical source positions to the shallow groundwater were identified. Of the pathways, three pathways were selected because they had highly water-conductive features. The transport travel times of the radionuclides were calculated by a TDRW (Time-Domain Random Walk) method. Diffusion and sorption mechanisms in a host rock matrix as well as advection-dispersion mechanisms under the KURT field condition were considered. To reflect the radioactive decay, four decay chains with the radionuclides included in the high-level radioactive wastes were selected. From the simulation results, the half-life and distribution coefficient in the rock matrix, as well as multiple pathways, had an influence on the mass flux of the radionuclides. For enhancing the reliability of safety assessment, this reveals that identifying the history of the radionuclides contained in the high-level wastes and investigating the sorption processes between the radionuclides and the rock matrix in the field condition are preferentially necessary.

• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.332-340
• /
• 2017

This study aims to propose a new optimization-based approach for design and analysis of the stand-alone hybrid energy supply system using renewable energy sources (RES). In the energy supply system, we include multiple energy production technologies such as Photovoltaics (PV), Wind turbine, and fossil-fuel-based AC generator along with different types of energy storage and conversion technologies such as battery and inverter. We then select six different regions of Korea to represent various characteristics of different RES potentials and demand profiles. We finally designed and analyzed the optimal RES stand-alone energy supply system in the selected regions using multiobjective optimization (MOOP) technique, which includes two objective functions: the minimum cost and the minimum $CO_2$ emission. In addition, we discussed the feasibility and expecting benefits of the systems by comparing to conventional systems of Korea. As a result, the region of the highest RES potential showed the possibility to remarkably reduce $CO_2$ emissions compared to the conventional system. Besides, the levelized cost of electricity (LCOE) of the RES-based energy system is identified to be slightly higher than conventional energy system: 0.35 and 0.46 $/kWh, respectively. However, the total life-cycle emission of $CO_2$ ($LCE_{CO2}$) can be reduced up to 470 g$CO_2$/kWh from 490 g$CO_2$/kWh of the conventional systems.

• Korean Journal of Clinical Pharmacy
• /
• v.22 no.4
• /
• pp.356-366
• /
• 2012

Background: Chemotherapy-induced peripheral neuropathy (CIPN) involving sensory and motor nerve damage or dysfunction is a common and serious clinical problem that affects many patients receiving cancer treatment. This condition may pose challenges for the clinician to diagnose and manage, particularly in patients with coexisting conditions or disorders that involve the peripheral nervous system. Many chemotherapeutic agents used today are associated with the development of serious and dose-limiting CIPN that can adversely affect the administration of planned therapy and can impair quality of life by interference with the patients' activities of daily living. The most important clinical objective in the evaluation of patients with CIPN is to determine their level of functional impairment involving activities of daily living. These findings are used to make medical decisions to continue, modify, delay, or stop treatment. The most commonly reported drugs to cause CIPN include taxanes, platinum agents, vinca alkaloids, thalidomide, and bortezomib. We aimed to determine PN incidence during cisplatin, carboplatin and oxaliplatin administration. Methods: We collected data from 125 patients who received at least one cycle of cisplatin, carboplatin or oxaliplatin. They completed a self-reported questionnaire and items related to their disease and peripheral neuropathy. The investigators filled in part of items about disease and treatment. Patient Neurotoxicity Qeustionnaire developed by Bionumerik company were applied for PN assessment. Results: The incidences of sensory neurotoxicities of cisplatin, carboplatin and oxaliplatin were respectively 23%, 56% and 50%. The incidences of motor neurotoxicities of cisplatin, carboplatin and oxaliplatin were respectively 18%, 42% and 19%. The incidences of severe neurotoxicities of cisplatin, carboplatin and oxaliplatin were respectively 13%, 28% and 14%. The incidences of PN were associated with cumulative dose but not age, gender and concurrent illness. 19.2% of the patients (24/125) were prescribed with gabapentin, nortriptyline or gabapentin plus nortriptyline to reduce these peripheral symptoms and 75% of the patients answered the drug were effective. Conclusion: Incidence of PN after cisplatin or oxaliplatin administration is cumulative dose-related. Physician-based assessments under-reported the incidence and severity of CIPN. To overcome this limitation, diagnostic tools specifically designed to assess peripheral neuropathy severity associated with chemotherapy must be developed.

• Journal of Technology Innovation
• /
• v.22 no.2
• /
• pp.221-245
• /
• 2014

In the era of fierce global competition and short product life cycle, firms have been interested in the technology valuation to improve their competitiveness. As the technology valuation may become a key issue for countries and industries, the development of technology valuation method has become increasingly important. Thus, this study aims to suggest a novel method to assess technology value by applying conjoint analysis to bibilographic information of patent. For this purpose, we firstly identified nine patent indexes categorized in three attributes - technological superiority, marketability and legal rights. Then, we collected actual data on patent transactions including their patent attributes and market prices. Based on the data, we could obtain the patent index values. Finally, we applied conjoint analysis to the prices and patent index values as a basis for technology valuation. The suggested method is expected to be an effective tool for technology valuation by using real transaction data rather than relying heavily on experts assessment.