• 한국산학기술학회논문지
• /
• 제11권3호
• /
• pp.926-930
• /
• 2010

본 논문은 컴포넌트 기반의 보안 시스템 개발을 위해 요구되는 개발 프레임워크에 관한 것이다. 정보시스템의 개발방법론 적용과 함께, 정보보호 제품의 개발방법론 적용이 현시점에 요구되고 있다. 본 논문에서는 개발방법의 NIST 요구규격, SDLC 단계별 요구기준, 위험평가 주요 보안 가이드 라인을 살펴보았다. 또한 SDLC 주요 보안 요소를 살펴보았고, 컴포넌트 기반 보안 프레임워크 수립에 대한 이해를 돕기 위해, 위협트리 STRIDE 기반의 외부 엔티티에 대한 스푸핑 측면에서 보안설계와 DFD 관계를 분석 제시하였다.

• Journal of Mechanical Science and Technology
• /
• 제19권7호
• /
• pp.1432-1440
• /
• 2005

High-temperature rupture behavior of 5083-Al alloy was tested for failure at 548K under multiaxial stress conditions: uniaxial tension using smooth bar specimens, biaxial shearing using double shear bar specimens, and triaxial tension using notched bar specimens. Rupture times were compared for uniaxial, biaxial, and triaxial stress conditions with respect to the maximum principal stress, the von Mises effective stress, and the principal facet stress. The results indicate that the von Mises effective and principal facet stresses give good correlation for the material investigated, and these parameters can predict creep life data under the multiaxial stress states with the rupture data obtained from specimens under the uniaxial stress. The results suggest that the creep rupture of this alloy under the testing condition is controlled by cavitation coupled with highly localized deformation process, such as grain boundary sliding. It is also conceivable that strain softening controls the highly localized deformation modes which result in cavitation damage in controlling rupture time of this alloy.

• 대한금속재료학회지
• /
• 제49권9호
• /
• pp.671-677
• /
• 2011

Steel columns used in steel buildings are inclined to lose their strength when exposed to severe fire conditions, so fire resistance is required in most countries to protect against loss of life and building collapses. In Korea, the fire resistance of columns can be obtained by the fire test defined in KS F 2257-1, 7. The fire resistance of a steel column should be evaluated in terms of the column's conditions, such as various section types (H-section, hollow-section), the column's length and boundary conditions, and whether it is fixed or hinged. However, fire testing of steel columns is usually conducted on one standard-sized H-section over 3,000 mm, and the result is used as the column's fire resistance. This is not a reasonable way to ensure that a building can withstand fire conditions. In this study, to evaluate the possibility of calculating the fire resistance of steel columns with material properties of high tensile strength of SS 400, both load-bearing fire tests and calculation of steel temperatures were carried out. The results of temperature calculation were very similar to those obtained by fire test.

• Safety and Health at Work
• /
• 제12권4호
• /
• pp.505-510
• /
• 2021

Background: Factors related to root causes can cause commonly occurring accidents such as falls, slips, and jammed injuries. An important means of reducing the frequency of occupational accidents in small- to medium-sized enterprises (SMSEs) of South Korea is to perform intensity analysis of the root cause factors for accident prevention in the cause and effect model like decision models, epidemiological models, system models, human factors models, LCU (life change unit) models, and the domino theory. Especially intensity analysis in a robot system and smart technology as Industry 4.0 is very important in order to minimize the occupational accidents and fatal accident because of the complexity of accident factors. Methods: We have developed the modern cause and effect model that includes factors of root cause through statistical testing to minimize commonly occurring accidents and fatal accidents in SMSEs of South Korea and systematically proposed educational policies for accident prevention. Results: As a result, the consciousness factors among factors of root cause such as unconsciousness, disregard, ignorance, recklessness, and misjudgment had strong relationships with occupational accidents in South Korean SMSEs. Conclusion: We conclude that the educational policies necessary for minimizing these consciousness factors include continuous training procedures followed by periodic hands-on experience, along with perceptual and cognitive education related to occupational health and safety.

• Journal of Interdisciplinary Genomics
• /
• 제3권2호
• /
• pp.41-46
• /
• 2021

Inherited platelet function disorders (IPFDs) are a disease group of heterogeneous bleeding disorders associated with congenital defects of platelet functions. Normal platelets essential role for primary hemostasis by adhesion, activation, secretion of granules, aggregation, and procoagulant activity of platelets. The accurate diagnosis of IPFDs is challenging due to unavailability of important testing methods, including light transmission aggregometry and flow cytometry, in several medical centers in Korea. Among several IPFDs, Glanzmann thrombasthenia (GT) is a most representative IPFD and is relatively frequently found compare to the other types of rarer IPFDs. GT is an autosomal recessive disorder caused by mutations of ITGA2B or ITGB3. There are quantitative or qualitative defects of the GPIIb/IIIa complex in platelet, which is the binding receptor for fibrinogen, von Willbrand factor, and fibronectin in GT patients. Therefore, patients with GT have normal platelet count and normal platelet morphology, but they have severely decreased platelet aggregation. Thus, GT patients have a very severe hemorrhagic phenotypes that begins at a very early age and persists throughout life. In this article, the general contents about platelet functions and respective IPFDs, the overall contents of GT, and the current status of genetic diagnosis of GT in Korea will be reviewed.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권5호
• /
• pp.951-959
• /
• 2021

The study investigated the effect of food safety knowledge, food safety trust and the factors influencing organic food purchase intention in the 'new normal' of the COVID-19 pandemic. The study employed non-contrived and cross-sectional methods. The data was collected in Malaysia using convenience sampling. A total of 330 valid questionnaires were analyzed using Structural Equation Modelling (SEM) and PROCESS for hypothesis testing. The study revealed a significant relationship involving food safety knowledge on personal attitude, perceived social pressure, and perceived autonomy. Moreover, organic food purchase intention was found to be influenced by personal attitude, perceived social pressure, and perceived autonomy. Interestingly, trust in organic food safety moderated the relationship between perceived autonomy and organic food purchase intention. The study proved valuable for stakeholders and organic food producers to understand the 'new normal' COVID-19 market scenario for a sound understanding of the market and the sustainability of the organic food industry. A new research framework is proposed and validated, related to individual purchase decision in global health issues which is limited in current literature. Hence, the study contributed to a better comprehension of green consumerism mainly in the Asian market.

• Clinical and Experimental Reproductive Medicine
• /
• 제48권4호
• /
• pp.283-294
• /
• 2021

A genetic etiology of male infertility is identified in fewer than 25% of infertile men, while 30% of infertile men lack a clear etiology, resulting in a diagnosis of idiopathic male infertility. Advances in reproductive genetics have provided insights into the mechanisms of male infertility, and a characterization of the genetic basis of male infertility may have broad implications for understanding the causes of infertility and determining the prognosis, optimal treatment, and management of couples. In a substantial proportion of patients with azoospermia, known genetic factors contribute to male infertility. Additionally, the number of identified genetic anomalies in other etiologies of male infertility is growing through advances in whole-genome amplification and next-generation sequencing. In this review, we present an up-to-date overview of the indications for appropriate genetic tests, summarize the characteristics of chromosomal and genetic diseases, and discuss the treatment of couples with genetic infertility by microdissection-testicular sperm extraction, personalized hormone therapy, and in vitro fertilization with pre-implantation genetic testing.

• 산업융합연구
• /
• 제2권2호
• /
• pp.47-68
• /
• 2004

The term "social marketing" was first introduced in 1971 to describe the use of marketing principles and techniques to advance a social cause, idea, or behavior. Social Marketing is a strategy for changing behavior. It utilizes concepts of market segmentation, consumer research, product concept development and testing, directed communication, facilitation, incentives, and exchange theory to maximize the target adopters' response. Social marketing requires knowledge of each target-adopter group, including its 1. social demographic characteristics, 2. psychological profile and 3. behavioral characteristics. To know the target adopters in these three related ways enables social marketer to make more accurate predictions. In addition to differentiating among and selecting target adopter groups, the social marketer will identify influence-holding groups, or influentials, who can affect a program's success. Great changes and opportunities exist to produce changes in the ways that individuals and groups think and behave and in meeting human needs. The balance of the scales of social change, we hope, will shift away from the use of force and violence to the use of persuasion and voluntary action. I trust that this dissertation will be useful highlighting the strategies and means of peaceful, planned social change designed to elevate the quality of life.

• Design & Manufacturing
• /
• 제12권3호
• /
• pp.36-41
• /
• 2018

Metal 3D printing is very useful for making the injection molds containing complex conformal cooling channels. The most important issue of the 3D printed molds is cost and life cycle. However, powder bed fusion (PBF) methods are vulnerable to fatigue loading because of the presence of pores and rough surfaces. In the present study, the fatigue test was performed to obtain fatigue analysis input data for predicting the durability of a 3D printed injection mold core. The metal 3D printer used to manufacture the specimen was OPM250L from Sodick, and the metal powder material was maraging steel. The ultrasonic fatigue testing method was adopted for the fatigue test. A key advantage of the ultrasonic fatigue method is that $10^8{\sim}10^9$ long cycle test data or more could be obtained within a relatively short period. Based on the results of the experiment, the effect of heat treatment was negligible. However, there was an apparent difference in durability depending on the presence or absence of the surface treatment.

• 한국멀티미디어학회논문지
• /
• 제22권2호
• /
• pp.194-202
• /
• 2019

In the information society represented by the Fourth Industrial Revolution, various types of data and information that are difficult to see are produced, processed, and processed and circulated to enhance the value of existing goods. The IoT(Internet of Things) paradigm will change the appearance of individual life, industry, disaster, safety and public service fields. In order to implement the IoT paradigm, several elements of technology are required. It is necessary that these various elements are efficiently connected to constitute one system as a whole. It is also necessary to collect, provide, transmit, store and analyze IoT data for implementation of IoT platform. We designed and implemented a big data processing IoT platform for IoT service implementation. Proposed platform system is consist of IoT sensing/control device, IoT message protocol, unstructured data server and big data analysis components. For platform testing, fixed IoT devices were implemented as solar power generation modules and mobile IoT devices as modules for table tennis stroke data measurement. The transmission part uses the HTTP and the CoAP, which are based on the Internet. The data server is composed of Hadoop and the big data is analyzed using R. Through the emprical test using fixed and mobile IoT devices we confirmed that proposed IoT platform system normally process and operate big data.