• 마이크로전자및패키징학회지
• /
• 제18권2호
• /
• pp.35-41
• /
• 2011

Recently, board level solder joint reliability performance of IC packages during drop impact becomes a great concern to semiconductor and electronic product manufacturers. The handheld electronic products are prone to being dropped during their useful service life because of their size and weight. The IC packages are susceptible to solder joint failures, induced by a combination of printed circuit board (PCB) bending and mechanical shock during impact. The board level drop testing is an effective method to characterize the solder joint reliability performance of miniature handheld products. In this paper, applying the JEDEC (JESD22-B111) standard present a finite element modeling of the FBGA. The simulation results revealed that maximum stress was located at the outermost solder ball in the PCB or IC package side, which consisted well with the location of crack initiation observed in the failure analysis after drop reliability tests.

• Corrosion Science and Technology
• /
• 제8권3호
• /
• pp.116-118
• /
• 2009

Korea Institute of Construction Materials founded Seosan Outdoor Exposure Test Site 2005 at Korea, which is a part of Worldwide Exposure Network (WEN). To evaluate the test site along with other exposure test sites, three different types of paints have been under real time weathering conditions at three major weathering test facilities around the world. Using these test specimens several spectroscopic experiments along with physical tests have been performed. Also acceleration tests have been performed using the same paints. The correlation of weathered paints among three different test facilities and accelerated test results has been compared. From the results the reliability of Seosan Weathering Test Facility and reasonable life time prediction tests are discussed.

• 설비공학논문집
• /
• 제27권6호
• /
• pp.307-312
• /
• 2015

The sandwich panel is commonly used domestically because it's less costly and easier to handle. But fires have frequently occurred in buildings employing sandwich panels, such as the fires in Eecheon cold storage and in Gwangju Pyungdong industrial zone. Sandwich panels with steel plates on their surface prevent fire water from penetrating to the fire source, which makes it difficult to extinguish a fire in a timely manner. Toxic gas generated from some insulation material leads to serious loss of life and property. This study is intended to develop an extinguishing system for sandwich panels, thereby reducing the fire risk. Fire water and volume were determined in the wake of the study on the structure of a sandwich panel extinguishing system, and improvement and testing of the fire characteristics of the sandwich panel. Based on such study and test, a fire model test was conducted. Consequently, the sandwich panel with extinguishing system was proven to have a reduced fire risk, compared to traditional or fire retardant panels.

• Journal of Information Technology Applications and Management
• /
• 제23권4호
• /
• pp.117-125
• /
• 2016

Software reliability in the software development process is an important issue. In infinite failure non-homogeneous Poisson process software reliability models, the failure occurrence rates per fault. can be presented constant, monotonic increasing or monotonic decreasing pattern. In this paper, the reliability software cost model considering decreasing intensity function was studied in the software product testing process. The decreasing intensity function that can be widely used in the field of reliability using power law process, log-linear processes and Musal-Okumoto process were studied and the parameter estimation method was used for maximum likelihood estimation. In this paper, from the software model analysis, we was compared by applying a software failure interval failure data considering the decreasing intensity function The decreasing intensity function model is also efficient in terms of reliability in the arena of the conservative model can be used as an alternating model can be established. From this paper, the software developers have to consider life distribution by preceding information of the software to classify failure modes which can be gifted to support.

• 한국인터넷방송통신학회논문지
• /
• 제8권4호
• /
• pp.9-14
• /
• 2008

실내 위치인식 기술은 유비쿼터스 구현의 기반이 되는 중요기술요소 중 하나이다. 특히 병원의 환자 관리, 실버타운의 노인관리, 스마트 홈의 구현을 위해서는 실외의 광역범위보다는 실내에서의 사용자 위치인식에 대한 기술이 필요하다. 본 논문에서는 무선랜기기 및 통신기술을 이용한 실내 위치 인식 시스템의 설계 구현에 관해 기술한다. 사용자 위치인식을 위한 기반기술로 무선랜의 전파신호강도(Received Signal Strength Indication, RSSI)를 이용한 삼변측량 기법을 이용하였다. 구현될 시스템은 무선랜기기와 지형 맵핑서버, Access Point(AP)로 구성되며, 시스템의 개발 및 실제 환경에서의 테스트를 통하여 실생활 응용에 대한 가능성을 확인할 수 있었다.

• 가정간호학회지
• /
• 제10권2호
• /
• pp.141-147
• /
• 2003

The purpose of this study was to develop and apply a Web-based Nursing Education & Instruction Program to help the clinical nurses improving their knowledge and skills of ostomy care. This program was developed in three different steps: analysis. design. and development. The results of the study were as follows: The analysis step was designed to select the study contents for effective and easy educationthrough the analyses of specialized books. This surveyed and analyzed study contents were categorized into five different sections. Introduction. ostomy classification. ostomy management. elimination management. and life style. After that each section describes necessary information of each category. In the design step. the image files used in this program were created using Adobe Photoshop 6.0. and HTML files were designed and developed using Namo Editor 5.0. In the development step. the developed program was published into Web using FTP (File Transfer Protocol) and then finalized after trial operation for testing of real users. In addition. this Web-based Nursing Education & Instruction Program will be used as excellentand effective tool for continuous and lifelong education in nursingfield. In this study. computer-aided education program was developed for ostomy management and managed at the Web-Server (http://hshong.knu.ac.kr/ostomy) in order to help nurses real-time education in clinical field by this program.

• 융합보안논문지
• /
• 제12권6호
• /
• pp.3-10
• /
• 2012

본 연구에서는 소프트웨어 제품을 개발하여 테스팅을 거친 후 사용자에게 인도하는 시기를 결정하는 방출문제에 대하여 연구 하였다. 소프트웨어의 결함을 제거하거나 수정 작업과정에서 학습요인을 고려한 유한고장수를 가진 비동질적인 포아송 과정에 기초하였다. 수명강도는 다양한 형상모수와 척도모수에 이용 할 수 있기 때문에 신뢰성 분야에서 많이 사용되는 로그 선형 모형을 이용한 방출시기에 관한 문제를 제시하였다. 소프트웨어 요구 신뢰도를 만족시키고 소프트웨어 개발 및 유지 총비용을 최소화 시키는 최적 소프트웨어 방출 정책에 대하여 논의 되었다. 본 논문의 수치적인 예에서는 고장 시간 자료를 적용하였으며 모수추정 방법은 최우추정법을 이용하고 최적 방출시기를 추정하였다.

• Carbon letters
• /
• 제7권3호
• /
• pp.196-200
• /
• 2006

Graphite has hexagonal closed packing structure with two bonding characteristics of van der Waals bonding between the carbon layers at c axis, and covalent bonding in the carbon layer at a and b axis. Graphite has high tolerant to the extreme conditions of high temperature and neutron irradiations rather than any other materials of metals and ceramics. However, carbon elements easily react with oxygen at as low as 400C. Considering the increasing production of today of hydrogen and electricity with a nuclear reactor, study of oxidation characteristics of graphite is very important, and essential for the life evaluation and design of the nuclear reactor. Since the oxidation behaviors of graphite are dependent on the shapes of testing specimen, critical care is required for evaluation of nuclear reactor graphite materials. In this work, oxidation rate and amounts of the isotropic graphite (IG-110, Toyo Carbon), currently being used for the Koran nuclear reactor, are investigated at various temperature. Oxidation process or principle of graphite was figured out by measuring the oxidation rate, and relation between oxidation rate and sample shape are understood. In the oxidation process, shape effect of volume, surface area, and surface to volume ratio are investigated at $600^{\circ}C$, based on the sample of ASTM C 1179-91.

• Journal of Information Technology Applications and Management
• /
• 제21권1호
• /
• pp.107-136
• /
• 2014

This study aims to suggest research implications that may contribute to preventing turnover of personnel in small and medium sized software companies. A research model is developed based on the Bergiel, et al. (2009) and Woo and Hwang (2010). This model describes how human resource management (HRM) practices (compensation, recognition, job autonomy, technical capability development, work-life conflict) affect turnover intention, through the mediating effects of job satisfaction and job embeddedness. 177 questionnaires are collected and analyzed. Validity and reliability of measures, and appropriateness of the structural model are verified. Results of the hypotheses testing are somewhat different from the expected ones: Only compensation and technical capability development are significant, but the remaining variables are not significant in affecting job satisfaction and job embeddedness. As for turnover intention, job embeddedness and job satisfaction are proved to be significant predictors. From the analyses of data, subsequent interview with several respondents and additional data analyses, more research implications are derived. The study has a limitation of not including more diverse variables that might affect job embeddedness and job satisfaction of so called road warriors.

• 한국전기전자재료학회논문지
• /
• 제29권11호
• /
• pp.729-735
• /
• 2016

It is highly important issue to use an energy efficiently for sustainable prosperity of mankind. From this point of view, using LED lighting can be a good alternative because it has a lot of advantages such as high efficiency, long life time and eco-friendly manufacturing process. That is the reason why using LED lighting has been encouraged worldwide. However, in situations that LED lighting is replacing traditional lighting quickly, the problem of the flicker of LED lighting has emerged as an important issue. Therefore, in foreign countries like US or Japan in order to ensure the reliability of LED lighting, study for flickering effects of the human body and test methods are have been actively conducted. But related research in domestic situation is an insufficient condition. In this study, a flicker characteristic was measured conventional lamps such as incandescent lamps or fluorescent lamp and 81 items of LED lightings which are distributed in domestic markets.