• 한국공간정보시스템학회:학술대회논문집
• /
• 2005.05a
• /
• pp.355-361
• /
• 2005

3차원 자료의 필요에 발맞추어 3차원 좌표를 직접적으로 획득할 수 있는 LIDAR 시스템이 등장하게 되었다 항공 LIDAR 시스템은 항공기, GPS, INS, Laser Scanner가 통합된 시스템으로 항공기에서 발사된 Laser의 반사파를 이용하여 거리와 그 때의 항공기의 자세, 위치를 통합하여 직접적인 3차원 포인트 자료를 획득할 수 있다. LiDAR 데이터는 지형, 건물, 식생 등의 지면위에 있는 모든 객체에 대한 3차원 자료와 영상자료를 함께 제공하고 있다. 이러한 LIDAR 자료로부터 DEM, DTM 등의 지형 정보와 식목, 건물 등 지물정보를 추출하는 연구가 활발하게 이루어지고 있다. 본 연구에서는 지형을 추출하는데 사용할 수 있는 몇 가지 필터링기법을 선정하여 국내의 다양한 지모, 지물에 적용하고 그 정확도를 평가해 보았다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.501-504
• /
• 2009

In order to investigate of possibility for developing urban wind power, wind profile and wind power density are estimated using Sodar and Lidar based on surface. Since poor performance of Sodar and Lidar are often shown in a paticular meteorological condition, inter-comparison and validation with radio-sonde for each of instruments are performed. As a result, Lidar shows a good performance and wind data from Lidar are used to analyze wind profile and wind power density. It can be found that a wind power system mounted tall building in urban area is very attractive.

• New & Renewable Energy
• /
• v.7 no.2
• /
• pp.43-50
• /
• 2011

The only practical way to measure wind resource at high-altitude over 100 m above ground for a feasibility study on a high-rise building integrated wind turbine might be ground-based remote sensing. The remote-sensing campaign was performed at a 145 m-building roof in Jamsil where is a center of metropolitan city Seoul. The campaign aimed uncertainty assessment of Leosphere WindCube LIDAR and Scintec MPAS SODAR through a mutual comparison. Compared with LIDAR, the data availability of SODAR was about 2/3 at 550 m altitude while both showed over 90% under 400 m, and it is shown that the data availability decrease may bring a distortion of statistical analysis. The wind speed measurement of SODAR was fitted to a slope of 0.92 and $R^2$ of 0.90 to the LIDAR measurement. The relative standard deviation of wind speed difference and standard deviation of wind direction difference were evaluated to be 30% and 20 degrees, respectively over the whole measurement heights.

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.3 s.37
• /
• pp.13-22
• /
• 2006

Realistic 3D building construction in urban area has become an important issue because of increasing demand of 3D geo-spatial information in many application. Contrary to the conventional 3D building model construction approach using aerial images and high-resolution satellite imagery, it has been researched widely in building reconstruction using high-accuracy aerial LIDAR data in the latest. This paper presents a method for 3D building construction through building outlines extraction by LoG operator's Zero-crossing and line generation and refinement by Douglas-Peucker algorithm.

• Journal of Korea Multimedia Society
• /
• v.24 no.11
• /
• pp.1518-1525
• /
• 2021

Due to the growth of VR industry and rise of digital twin industry, the importance of implementing 3D data same as real space is increasing. However, the fact that it requires expertise personnel and huge amount of time is a problem. In this paper, we propose a system that generates point cloud data with same shape and color as a real space, just by scanning the space. The proposed system integrates 3D geometric information from lidar and color information from stereo camera into one point cloud. Since the number of 3D points generated by lidar is not enough to express a real space with good quality, some of the pixels of 2D image generated by camera are mapped to the correct 3D coordinate to increase the number of points. Additionally, to minimize the capacity, overlapping points are filtered out so that only one point exists in the same 3D coordinates. Finally, 6DoF pose information generated from lidar point cloud is replaced with the one generated from camera image to position the points to a more accurate place. Experimental results show that the proposed system easily and quickly generates point clouds very similar to the scanned space.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.4
• /
• pp.28-39
• /
• 2014

Several studies have been performed globally on the construction of integrated systems that are available for the integrated use of 3D geographic information on terrain and oceans. Research on 3D geographic modeling is also facilitated by the application of Lidar surveying, which enables the highly accurate realization of 3D geographic information for a wide area of land. In addition, a few marine research organizations have been conducting investigations and surveying diverse ocean information for building and applying MGIS(Marine Geographic Information System). However, the construction of integrated geographic information systems for both terrain and oceans has certain limitations resulting from the inconsistency in reference systems and datum levels between two data. Therefore, in this investigation, integrated geospatial information has been realized by using a combined topographical map, after matching the reference systems and datum levels by integration of airborne Lidar data and multi-beam echo sounder data. To verify the accuracy of the integrated geospatial information data, ten randomly selected samples from study areas were selected and analyzed. The results show that the 10 analyzed data samples have an RMSE of 0.46m, which meets the IHO standard(0.5m) for depth accuracy of hydrographic surveys.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.28-34
• /
• 2020

This paper proposes an approach to the fusion of two heterogeneous sensors with two different fields-of-view (FOV): LIDAR and an RGB camera. Registration between data captured by LIDAR and an RGB camera provided the fusion results. Registration was completed once a depthmap corresponding to a 2-dimensional RGB image was generated. For this fusion, RPLIDAR-A3 (manufactured by Slamtec) and a general digital camera were used to acquire depth and image data, respectively. LIDAR sensor provided distance information between the sensor and objects in a scene nearby the sensor, and an RGB camera provided a 2-dimensional image with color information. Fusion of 2D image and depth information enabled us to achieve better performance with applications of object detection and tracking. For instance, automatic driver assistance systems, robotics or other systems that require visual information processing might find the work in this paper useful. Since the LIDAR only provides depth value, processing and generation of a depthmap that corresponds to an RGB image is recommended. To validate the proposed approach, experimental results are provided.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.1
• /
• pp.55-62
• /
• 2011

Amidst the raising of climate change in relation to the earth's environment as an international issue, there is a growing interest in forest resources. In particular, Korea faces a period in which we need to control carbon release pursuant to the Convention on Climate Change and the enforcement of the Kyoto Protocol; therefore, the importance of forests is becoming greater. Recently, there has been a focus on light detection and ranging (Lidar) which is a means of acquiring in a short time various necessary pieces of information for forest management as three dimensional geospatial information. In this study, the carbon absorption of a forest was measured by using the Lidar data obtained from the Lidar. Carbon absorption release was calculated on the basis of three criteria involving the minimum height of a tree, the density of the forest, and the minimum area of the forest, which are items proposed by the Forest resources surveyor. Through this study, a method of extracting the carbon absorption of a forest area using the Lidar data quantitatively was confirmed.

• Journal of IKEEE
• /
• v.23 no.4
• /
• pp.1302-1308
• /
• 2019

This paper presents an approach for classifying image made by acquired position data from a 2D Lidar sensor with a convolutional neural network (CNN). Lidar sensor has been widely used for unmanned devices owing to advantages in term of data accuracy, robustness against geometry distortion and light variations. A CNN algorithm consists of one or more convolutional and pooling layers and has shown a satisfactory performance for image classification. In this paper, different types of CNN architectures based on training methods, Gradient Descent(GD) and Levenberg-arquardt(LM), are implemented. The LM method has two types based on the frequency of approximating Hessian matrix, one of the factors to update training parameters. Simulation results of the LM algorithms show better classification performance of the image data than that of the GD algorithm. In addition, the LM algorithm with more frequent Hessian matrix approximation shows a smaller error than the other type of LM algorithm.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.4
• /
• pp.341-350
• /
• 2008

Change detection has been recognized as one of the most important steps to update city models. In this study, we thus propose a method to detect urban changes from two sets of LIDAR data acquired at different times. The main processes in the proposed method are (1) detecting change areas through subtraction between two DSMs generated from the LIDAR sets, (2) organizing the LIDAR points within the detected areas into surface patches, (3) classifying the class of each patch such as ground, vegetation, and building, and (4) determining the kinds of changes based on the properties and classes of the patches. The results which were obtained from the application of the proposed method to real data were verified as appropriate using the reference data manually acquired from the visual inspection of the orthoimages of the same area. The probability of success in change detection is assessed to 97% on an average. In conclusion, the proposed method is evaluated as a reliable, and efficient approach to change detection and thus the update of city model.