• The Korean Journal of Pain
• /
• v.13 no.1
• /
• pp.84-88
• /
• 2000

Background: An increase in the maximum level of sensory blockade (MLSB) following an epidural top-up in combined spinal epidural anesthesia (CSE) may be achieved by a volume effect as the volume of local anesthetic compresses the dural sac, by a local anesthetic effect, or by a combination of both effects. This study was conducted to investigate the contribution of each of these effects. Methods: Sixty patients scheduled for lower limb surgery under CSE were randomly allocated to one of three groups of twenty patients each. Using the needle-through needle technique, all patients received a subarachnoid dose of 10 mg hyperbaric 0.5% bupivacaine. At 30 min after subarachnoid injection, an epidural top-up with saline 10 ml (group II) or 0.5% bupivacaine 10 ml (group III) was administered; patients in group I received no epidural top-up. The level of sensory blockade was assessed at 5, 10, 15, 20, 25, 30 min after subarachnoid injection and at 5, 10, 15, 20, 25, 30 min after epidural top-up. Results: There was no significant difference in the MLSB and the onset time of MLSB among group I-III. Conclusions: We concluded that the epidural top-up with saline 10 ml or 0.5% bupivacaine 10 ml which injected at 30 min after subarachnoid injection did not significantly increase the level of subarachnoid block in lower extremity surgical patients.

• Journal of Industrial Convergence
• /
• v.22 no.2
• /
• pp.135-141
• /
• 2024

This study aimed to analyze the characteristics of health check-up recipients in their 20s and 30s in Korea and identify factors influencing the participation rate in order to enhance the rate of health check-ups. The study population and methods utilized data from the 8th year of the Korea National Health and Nutrition Examination Survey, specifically the 2nd year (2020), and targeted 1,453 Korean residents aged between 20 and 30. The factors affecting health check-up participation were divided into sociodemographic factors, health behavior factors, mental health factors, and medical utilization factors, and both simple logistic regression analysis and multiple logistic regression analysis were conducted. The analysis results showed that educational level, marital status, type of health insurance, employment status, and subjective level of health were the factors influencing health check-up participation among Korean individuals in their 20s and 30s. These research findings can serve as foundational data for improving the health check-up participation rate among individuals in their 20s and 30s.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.12
• /
• pp.198-208
• /
• 1995

BiCMOS circuit consist of CMOS part which constructs logic function, and bipolar part which drives output load. Test to detect stuck-open faults in BiCMOS circuit is important, since these faults do sequential behavior and are represented as transition faults. In this paper, proposes a method for efficiently detecting transistor stuck-open faults in BiCMOS circuit by transforming them into slow-to=rise transition and slow-to-fall transition. In proposed method, BiCMOS circuit is transformed into equivalent gate-level circuit by dividing it into pull-up part which make output 1, and pull-down part which make output 0. Stuck-open faults in transistor are modelled as transition fault in input line of gate level circuit which is transformed from given circuit. Faults are detceted by using pull-up part gate level circuit when expected value is '01', or using pull-down part gate level circuit when expected value is '10'. By this method, transistor stuck-open faults in BiCMOS circuit are easily detected using conventional gate level test generation algorithm for transition fault.

• Journal of Information Display
• /
• v.2 no.2
• /
• pp.32-38
• /
• 2001

PDP(plasma display panel) represents the gray levels by the pulse number modulation technique that results in undesirable dynamic false contours on moving images. This paper proposes a LUT(Look-up table) based error diffusion algorithm for reduction of the dynamic false contours. A quantitative measure of the dynamic false contours is defined first. The measure of the dynamic false contours is calculated through simulation of every gray level combination of two consecutive frames. Based on the calculated measures, a modified gray level for a pair of gray levels of two consecutive frames is chosen to reduce the dynamic false contours. The chosen gray levels serve as contents of a gray level conversion LUT. Given a pair of gray levels of two consecutive frames, the gray level of current frame is modified based on the gray level conversion LUT. The new gray level is displayed on PDP. An error diffusion algorithm is, then, applied to compensate for the differences in the gray levels.

• Environmental Engineering Research
• /
• v.19 no.4
• /
• pp.317-329
• /
• 2014

The diversity of cyanobacteria in Sri Lanka was studied in different water reservoirs, paddy fields, brackish water and tsunami affected areas using light microcopy, 16S rRNA sequences, followed by phylogenetic analysis. Based on light microscopy, 24 genera were identified from environmental samples belonging to the orders Chroococcales, Oscillatoriales, Pleurocapsales and Nostocales. In cultures, 33 genera were identified from all five cyanobacterial orders, including Stigonematales. Based on 16S rRNA gene sequences and their morphology, two isolates were identified up to species level, 72 to genus level, one isolate up to family and 11 up to order level. Twelve isolates couldn't be assigned to any taxonomic level. The results of 16S rRNA gene sequences along with the phylogenetic analysis indicated that some cyanobacterial isolates could be accommodated to genus or order level. The 16S rRNA sequence analysis data in this study confirmed that order Nostocales and order Pleurocapsales cyanobacteria are monophyletic while orders Chroococcales, Oscillatoriales and Stigonematales cyanobacteria are polyphyletic. Polyphasic approach including the combination of light microscopy, cultures and the analysis of 16S rRNA gene sequences provide a promising approach to ascertain the diversity of cyanobacteria in different habitats.

• The Journal of the Korean dental association
• /
• v.55 no.1
• /
• pp.22-29
• /
• 2017

Purpose : Preservation of the periodontal health of the treated patient requires supportive periodontal therapy for the elimination of periodontal disease. After Phase I therapy is completed, patients are placed on a schedule of periodic recall visits for maintenance care to prevent recurrence of the disease. The amount of tooth loss would be the most relevant criterion in an evaluation of the effect of periodontal treatment, but this would require studies with extremely long follow-up periods. Thus the most commonly used outcome criteria in clinical research have been clinical attachment level change, reduction of pocket depth and bleeding frequency. The purpose of this case study is to identify the effect of supportive periodontal therapy after periodontal flap surgery. Materials & Methods : Following routine hygienic phase of treatment, patients with chronic periodontitis received surgical periodontal treatment. Bleeding on probing, pocket depth and clinical attachment level were measured at baseline, pre-operation and 1 year follow up. All procedures were performed by one operator. Results : One year a total of 28 patients (58sites) to recheck remained, when conducted maintenance program after periodontal flap surgery was observed reduction of bleeding frequency, pocket depth and improvement of clinical attachment level. Conclusion : The results from this study indicate that supportive periodontal therapy after periodontal flap surgery is effective for reduction of bleeding frequency, pocket depth and gain of clinical attachment level.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.11 no.3
• /
• pp.175-181
• /
• 1991

The purpose of this experiment was to evaluate the effects of shade and levels of N fertilization on the dry matter yield and chemical compositions of orchardgrass grown under floor of chestnut tree. Shading conditions consist of $S_0$, (full light), $S_1$, (about 6OC4 shade) and $S_2$, (about 70% shade). And, nitrogen fertilizer was applied at 3 levels, O($N_0$), 12($N_1$), and 30($N_2$) kg per 10a, respectively. The results are may be summarized as follows: 1. Maximum total dry matter yield of $S_0$, was obtained about 1.28 ton/lOa at $N_2$, level. But, total dry matter yields of N levels in $S_1$, and $S_2$, were decreased about 42-45% compared with $S_0$. 2. The response of the dry matter yield to N fertilization were differences between shading and levels of N. Thus, the dry matter yield of $S_1$, increased almost linear up to about 30 kg/l0a level, while the dry matter yield of S, was increased slightly up to 30 kgIl0a. But. $S_2$, was increased up to 12 kg/lOa and then decreased slightly with N fertilization over the 12 kg/l0a. 3. Average increase in total dry matter yield to N fertilization were 23.85 kg, 7.97 kg and 5.08 kg DM for $S_0$, $S_1$, and $S_2$, respectively. 4. The level of 12 kg N/lOa is the limiting N level to obtain dry matter production under 60-709 shading conditions. 5. The contents of crude protein arid nitrate nitrogen were increased with shading and incremental N fertilization up to 30 kg/l0a. But, water soluble carbohydrate content was decreased greatly with high shading and high levels of N. 6. Nitrate nitrogen content indicated highly significant positive correlation with crude protein, but significant negative correlation with water soluble carbohydrate content. 7. At 30 kg N level with $S_1$, was necessary to exceed the potentially toxic nitrate nitrogen level of 0.20%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.3858-3869
• /
• 2015

In industrial society, the conversation topic of this period is mainly business start up, and revitalization of business start-up, through creation of new jobs, is playing an important role in employment maximization and revitalization of economy in general; one of those inducements is a start-up business incubation system, in whose center exists a start-up business incubator center. Hereupon, this study is intending to contribute to setting up the efficient operation direction and polity line, and provide a clue to a discussion by empirically analyzing the influence of quality level and degree of assistance of a start-up business incubator on satisfaction. For this purpose, this study developed a questionnaire on the basis of the preceding researches and conducted its research targeting a total of 500 valid samples. As a result of doing research, it was found that the quality level and assistance degree of services provided to a move-in company or a preparator of business start-up has a significant influence on satisfaction with the center & support service, and a manager's capabilities and related technology characteristics had a significant influence on satisfaction.

• The Mathematical Education
• /
• v.52 no.4
• /
• pp.531-547
• /
• 2013

The purpose of the study is to examine how effects of activities using Google SketchUp on students' spatial ability and 3D geometric thinking in measuring the volume of solid figures. By comparing the results from pre- and post-tests between the experimental group and control group, we found that activities using Google SketchUp help students improve their spatial ability in the spatial orientation and visualization. In addition, more than half students in the experimental group moved from level 4 up to level 7 in thinking process of measuring the volume in terms of Battista(2004)'s levels. This study suggests that the instruction with Google SketchUp can help to improve students' spatial ability and 3D geometric thinking in the regular class in middle school. In addition, SketchUp can be an advanced technological tool to support students' self-directed learning, which create an efficient educational environment and a great opportunity to learn geometry in an effective manner.

• Asian Journal of Innovation and Policy
• /
• v.6 no.1
• /
• pp.45-57
• /
• 2017

This study aims to analyze the factors that could influence business decisions of in the commercialization of R&D when technology is transferred from government research institutes (GRIs) to small and medium-sized enterprises (SMEs). We examine 353 such cases of technology transfer. The dependent variable is whether the licensee had the intention of following up with R&D after the technology has been transferred. The independent variables, classified into ex-ante factors and ex-post factors, consist of the involvement of SMEs into GRI R&D, technology readiness level, relatedness to existing technologies, and contribution to sales revenue and level-up of existing technologies. The results of the study show that the contribution to existing technologies has a positive impact on R&D commercialization. However, unlike our expectation, contribution to sales revenue, the involvement of SMEs into GRI R&D, technology readiness level, the relatedness to existing technologies of the technology transferred have no impact on follow-up R&D.