• Journal of Korean Academy of Nursing
• /
• v.27 no.3
• /
• pp.489-502
• /
• 1997

Quality of life(QOL) and fatigue in cancer patients receiving the radiotherapy was assessed. The subjects were 46 cancer patients who daily attended the radiotherapy department. Assessment was done on four occassions : the first assessment was done on the treatment simulation visit, the second one was four weeks after treatment started, the third one at the completion of treatment and the last assessment was done between six and eight week following treatment. The results are as follows : The fatigue scores of the patients at each stage of assessment ranged from 5.49 points to 7.67 points and highest score was recorded at the third assessment that is, at the completion of treatment. The fatigue points showed an increase from the 1st. to 3rd. stage. However, at the 4th. stage, fatigue points decreased to the level at the first stage of assessment. QOL were assessed in three areas namely, physical, emotional and social /functional. The QOL scores in the physical area showed the highest score, followed by social /functional and emotional areas. The QOL scores decreased gradually to the third. stage of assessment thereafter recovered to the level of the first. stage. Correlation between QOL and fatigue scores during the treatment indicated that the level of QOL decreased as the level of fatigue increased. In particular, fatigue persisted after completion of the treatment and showed a significantly negative correlation with QOL. The present study strongly suggests that a strategy to restore the emotional well being level of the patient should be devised in order to improve QOL and reduce fatigue of patients receiving radiotherapy.

• Journal of Industrial Technology
• /
• v.23 no.A
• /
• pp.139-147
• /
• 2003

The purpose of this study was to investigate and analyze the fatigue test data of pavement concrete. The static strength tests were carried out to check the compressive strength, flexural strength, and split tension strength at 56 days in order to minimize strength variation effect during test. The specimens were fabricated at twelves sections at a construction site of highway. The stress level and stress ratio of fatigue test were determined from static test results. The results are as follow: The flexural strength at 28 days mostly satisfied the criterion for design, but the compressive strength at 28 days were slightly below the criterion even though it satisfied at 56 days. The fatigue limit was 2 million cycles if the specimen was not failed to that cycles. The S-N curves were developed from the fatigue test results at each stress levels and each stress ratio. Then, the fatigue life of pavement concrete at a given stress level and fatigue strength of pavement concrete could be derived from these curves. Analysis using method No.2 was more acceptable because resulting of comparison and analysis using method No.2 was presented 2 sections were presented $R^2$ < 0.7, and other 2 sections were presented 0.7 < $R^2$ < 0.8, and the others 8 sections were $R^2{\geq}0.8$.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.741-747
• /
• 2022

Fatigue lowers an individual's ability and makes it difficult to perform work. As fatigue accumulates, concentration decreases and thus the possibility of causing a safety accident increases. Awareness of fatigue is subjective, but it is necessary to quantitatively measure the level of fatigue in the actual field. In previous studies, it was proposed to measure the level of fatigue by expert judgment by adding objective indicators such as bio-signal analysis to subjective evaluations such as multidisciplinary fatigue scales. However this method is difficult to evaluate fatigue in real time in daily life. This paper is a study on the fatigue classification model that determines the fatigue level of workers in real time using speech data recorded in the field. Machine learning models such as logistic classification, support vector machine, and random forest are trained using speech data collected in the field. The performance evaluation showed good performance with accuracy of 0.677 to 0.758, of which logistic classification showed the best performance. From the experimental results, it can be seen that it is possible to classify the fatigue level using speech signals.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.4
• /
• pp.181-190
• /
• 2007

The purpose of this study was to analyze the muscle fatigue for lower limbs during the level and downhill running. The subjects were 6 males of twenties who have no experience to get the injury in the lower limbs and required to run on the level and downhill which was -7% grade treadmill at 8.3km/h. EMG signal was gained by ME3000P8 Measurement Unit and computed the Median Frequency(MF) with the power spectrum analysis in the Megawin software. Rectus femoris(RF), Vastus lateralis(VL), Gluteus medius(GLU), Biceps Femoris(BF), gastrocnemius medial head(GM), gastrocnemius lateral head(GL), Tibialis anterior(TA) were selected. The result of this study were as follows: The MF of RF decreased in the downhill running than level running in length of time but, the MF of VL was opposite. The MF of BF decreased in the level and downhill running, but, the MF of BF decreased much in the level than downhill running. The MF of GLU decreased much in the downhill running but, almost no change in the level running. The MF of TA decreased in the level running than downhill running. The MF of GL decreased in the level running but, the MF of GM decreased in the downhill running in length of time. This study analyzed the muscle fatigue of the lower limbs with the median frequency on the basis of an assumption that the impact force for the flexion and extension of the joint and the body mass may be much in the eccentric contraction such as the downhill running than level running. RF and GM showed the muscle fatigue in the downhill running than level running. BF and GL showed the muscle fatigue in the level running than downhill running.

• Korean Journal of Adult Nursing
• /
• v.28 no.1
• /
• pp.106-115
• /
• 2016

Purpose: This study aimed to investigate sleep, fatigue, and the level of health promoting behaviors in Korean army soldiers. The factors influencing on health promoting behaviors of soldiers were also identified. Methods: A cross-sectional descriptive survey design was used. Data was collected from 269 soldiers in four military units of Korea in July 2015. Verran and Snyder-Halpern Sleep Scale, Fatigue Severity Scale, and Health Promoting Lifestyle Profile-II were used. Results: The health promoting behaviors were significantly different by perceived health status (p<.001) and presence of fatigue (p<.001). There were significant correlations between quality of sleep, fatigue, and health promoting behaviors of the subjects. In a multiple linear regression analysis, the level of health promoting behaviors were lower in the subjects with high level of fatigue (p<.001) and with fair perceived health status (p=.003). Conclusion: In order to increase health promoting behaviors of soldiers, it takes into account of soldiers' fatigue and perceived health status. Environmental arrangement for soldiers for the break time is needed urgently to decrease their fatigue as well as to improve their sleep quality.

• Journal of Biomedical Engineering Research
• /
• v.32 no.4
• /
• pp.319-327
• /
• 2011

Skeletal muscle fatigue is defined as a 'any reduction in the maximal capacity to generate force or power output', and is the reduction of oxygen consumption and by-product of metabolism. For the muscle fatigue therapy, low level laser has been introduced that leads the mitochondrial respiratory and attributes the muscle fatigue recovery. This study analyzed the muscle fatigue signals from electromyography(EMG) during low-level laser therapy (LLLT). Healthy subjects performed voluntary elbow flexion-extension excercise and received placebo LLLT and active LLLT using a 830 nm laser diode. Then, EMG were measured for the evaluation of muscle fatigue. The acquired EMG data were analyzed with median frequency and short time fourier transform methods. The results showed that the LLLT had a significant symptomatic relief of muscle fatigue based on the EMG frequency analysis. Therefore, the muscle fatigue analysis with EMG signals can be applied to quantitative evaluation for the monitoring of LLLT effects.

• Computers and Concrete
• /
• v.21 no.3
• /
• pp.291-298
• /
• 2018

In this study, the flexural fatigue performance of concrete beams made with 100% Coarse Recycled Concrete Aggregates (RCA) and 100% Coarse Natural Aggregates (NA) were statistically commanded. For this purpose, the experimental fatigue test results of earlier researcher were investigated using two parameter Weibull distribution. The shape and scale parameters of Weibull distribution function was evaluated using seven numerical methods namely, Graphical method (GM), Least-Squares (LS) regression of Y on X, Least-Squares (LS) regression of X on Y, Empherical Method of Lysen (EML), Mean Standard Deviation Method (MSDM), Energy Pattern Factor Method (EPFM) and Method of Moments (MOM). The average of Weibull parameters was used to incorporate survival probability into stress (S)-fatigue life (N) relationships. Based on the Weibull theory, as single and double logarithm fatigue equations for RCA and NA under different survival probability were provided. The results revealed that, by considering 0.9 level survival probability, the theoretical stress level corresponding to a fatigue failure number equal to one million cycle, decreases by 8.77% (calculated using single-logarithm fatigue equation) and 6.62% (calculated using double logarithm fatigue equation) in RCA when compared to NA concrete.

• Journal of Korean Academy of Nursing
• /
• v.32 no.4
• /
• pp.482-491
• /
• 2002

This study aimed to identify the change patterns of fatigue and quality of life during consecutive chemotherapies and to determine the relationship of these two variables. Method: Stomach cancer patients receiving chemotherapy were recruited from a university hospital in Seoul. Each chemotherapy, subjects were asked to respond to the questionnaires regarding their fatigue and quality of life. The number of subjects who completed 4 cycles and over was 11. Fatigue was measured with Lee's tool(1999). Quality of life was measured with a tool revised by the author based on Padilla et al(1983). Result: Most patients were in 1st stage(5 patients) or 3rd stage(5 patients). Fatigue was revealed at its highest level in the 3rd or 4th chemotherapy and at its lowest level in the 1st or 6th chemotherapy. A quality of life appeared at its highest level in the 5th or 6th chemotherapy and the lowest level in 3rd or 4th chemotherapy. Conclusion: Among 6 cycles of chemotherapy, in 3-4th chemotherapy the fatigue was the highest and the quality of life were the lowest. Many patients decided to stop treatment at the same period. Therefore we can recognize cancer patients receiving chemo- therapy are in the highest risk at the time of the 3-4 th chemotherapy.

• Korean Journal of Occupational Health Nursing
• /
• v.20 no.3
• /
• pp.261-269
• /
• 2011

Purpose: The purpose of this study was to investigate occupational stress and fatigue level of neonatal nurses and to assess relationship between the two of them. Methods: Subjects were 109 neonatal nurses working at 2 university hospitals and 9 women's hospitals in D city, and the data were analyzed using descriptive statistics and binary logistic regression analysis by the SPSS/WIN 15.0. Results: The mean score of nurses' occupational stress level was 3.22, and the highest was 'night shift' among the 7 subcategories, and fatigue level was 62.0, and the highest was physical fatigue in configuration field. In logistic regression analyses, 'heavy workload' and 'inadequate physical environment' led to most occupational stress. Conclusion: In addition to significantly higher levels of occupational stress of neonatal nurses, the cumulative fatigue also resulted in decreased quality of nursing, job satisfaction and nursing productivity; therefore, appropriate number of nurses and improvement of work environment is necessary. Furthermore, to reduce the occupational stress and fatigue, we should try to develop adequate clinical guidelines and intervention strategies and apply them in neonatal care unit.

• Journal of Ocean Engineering and Technology
• /
• v.9 no.2
• /
• pp.141-148
• /
• 1995

Fatigue tests were carried out by a rotary bending testing machine of cantilever type. M.E.F.(ferrite encapsulated islands of martensite) materials were made by a series of heat treatment from a low carbon steel(SM 20 C). The fatigue tests were conducted at stress levels of 302 MPa and with frequencies of 25Hz, 2.5 Hz and 0.5 Hz in 3% NaCl solution. The fatigue strength increased with frequency got higher. The microcracks and corrosion pits were generated at the boundary between the matrix and the 2nd phase. The cracks generated by the corrosion pits were coalesced with the pits around the notch and became the initial crack. The $N_i/N_f$ ratio increased as the frequency and stress level decreased. The interference phenomenon increased with stress level and frequency gots higher. The crack propagation rate was delayed as the stress level lowers and the frequency gets higher, however, the range of the stress intensity factor depended only on a stress level.