• Korean Journal of Optics and Photonics
• /
• v.31 no.5
• /
• pp.205-212
• /
• 2020

In the performance of a wind turbine system, the blades play a vital role. However, they are susceptible to damage arising from complex and irregular loading (which may even cause catastrophic collapse), and they are expensive to maintain. Therefore, it is very important both to find defects after blade manufacturing is completed and to find damage after the blade is used for a certain period of time. This study provides a new perspective for the detection of internal defects in glass-fiber- and carbon-fiber-reinforced panels, which are used as the main materials in wind turbine blades. A gap or fracture between fiber-reinforced materials, which may occur during blade manufacturing or operation, is simulated by drilling a hole 5 mm in diameter in the middle layer of the laminated material. Then, a digital-image-correlation (DIC) method is used to detect internal defects in the blade. Tensile load is applied to the fabricated specimen using a tensile tester, and the generated changes are recorded and analyzed with the DIC system. In the glass-fiber-reinforced laminated specimen, internal defects were detected from a strain value of 5% until the end of the experiment, while in the case of the carbon-fiber-reinforced laminated specimen, internal defects were detected from 1% onward. It was proved using the DIC system that the defect was detected as a certain level of strain difference developed around the internal defects, according to the material properties.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.3 s.333
• /
• pp.25-34
• /
• 2005

In this paper, we analyzed and measured the electrical crosstalk characteristics of a triplex transceiver module for ethernet Passive optical networks(EPONS). And we improved the electrical crosstalk levels using Dummy ground lines with signal lines. The triplex transceiver module consists of a laser diode as a transmitter, a digital photodetector as a digital data receiver, and a analog photodetector as a community antenna television signal receiver. And there are integrated on silicon substrate. The digital receiver and analog receiver sensitivity have to meet -24 dBm at $BER=10^{-l2}$ and -7.7 dBm at 44 dB SNR. And the electrical crosstalk levels have to maintain less than -86 dB from DC to 3 GHz. From analysis and measurement results, the proposed silicon substrate structure that contains the Dummy ground line with $100\;{\mu}m$ space from signal lines and separates 4 mm among devices respectively, is satisfied the electrical crosstalk level compared to simple structure. This proposed structure can be easily implemented with design convenience and greatly reduced the silicon substrate size about $50\%$.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.10
• /
• pp.17-28
• /
• 1999

In this paper, an ASIC emulation system called ACE (ASIC Emulator) is proposed. It can produce the prototype of target ASIC in a short time and verify the function of ASIC circuit immediately The ACE is consist of emulation software in which there are EDIF reader, library translator, technology mapper, circuit partitioner and LDF generator and emulation hardware including emulation board and logic analyzer. Technology mapping is consist of three steps such as circuit partitioning and extraction of logic function, minimization of logic function and grouping of logic function. During those procedures, the number of basic logic blocks and maximum levels are minimized by making the output to be assigned in a same block sharing product-terms and input variables as much as possible. Circuit partitioner obtain chip-level netlists satisfying some constraints on routing structure of emulation board as well as the architecture of FPGA chip. A new partitioning algorithm whose objective function is the minimization of the number of interconnections among FPGA chips and among group of FPGA chips is proposed. The routing structure of emulation board take the advantage of complete graph and partial crossbar structure in order to minimize the interconnection delay between FPGA chips regardless of circuit size. logic analyzer display the waveform of probing signal on PC monitor that is designated by user. In order to evaluate the performance of the proposed emulation system, video Quad-splitter, one of the commercial ASIC, is implemented on the emulation board. Experimental results show that it is operated in the real time of 14.3MHz and functioned perfectly.

• The korean journal of orthodontics
• /
• v.39 no.2
• /
• pp.105-111
• /
• 2009

Objective: To estimate the effects of bracket material type on enamel decalcification during orthodontic treatment, this study analyzed the adhesion level of mutans streptococci (MS) to orthodontic bracket materials in vivo. Methods: Three different types of orthodontic bracket materials were used: stainless steel, monocrystalline sapphire, and polycrystalline alumina. A balanced complete block design was used to exclude the effect of positional variation of bracket materials in the oral cavity. Three types of plastic individual trays were made and one subject placed the tray in the mouth for 12 hours. Then, the attached bacteria were isolated and incubated on a mitis salivarius media containing bacitracin for 48 hours. Finally, the number of colony forming units of MS was counted. The experiments were independently performed 5 times with each of the 3 trays, resulting in a total of 15 times. Mixed model ANOVA was used to compare the adhesion amount of MS. Results: There was no difference in colony forming units among the bracket materials irrespective of jaw and tooth position. Conclusions: This study suggested that the result of quantitative analysis of MS adhesion to various orthodontic bracket materials in vivo may differ from that of the condition in vitro.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.1
• /
• pp.209-215
• /
• 2013

Objectives: Terminal cancer patients and their caregivers often experience traumatic stress and need many types of assistance. In the present study we interviewed terminally ill cancer patients and caregivers to determine how much burden they experienced and to find out what factors are most important for satisfaction. Design: We constructed a questionnaire including overall care burden and needs experienced, and administered it to 659 terminal cancer patients and 659 important caregivers at 11 university hospitals and 1 national cancer center in Korea. Results: Finally, 481 terminal cancer patients and 381 caregivers completed the questionnaire. Care burden was not insubstantial in both and the caregiver group felt more burden than the patient group (P<0.001). While the patient group needed financial support most (39.0%), the caregiver group placed greatest emphasis on discussion about further treatment plans (44.8%). Stepwise multiple logistic regression analyses showed that in the patient group, patient's health status (OR, 2.03; 95%CI, 1.16-3.56) and burden (OR, 2.82; 95%CI, 1.76-4.50) influenced satisfaction about overall care, while in the caregiver group, high education level (OR, 1.84; 95%CI, 1.76-4.50), burden (OR, 2.94; 95%CI, 1.75-4.93) and good family function (OR, 1.94; 95%CI, 1.24-3.04) were important. Conclusions: Our study showed that burden was great in both terminal cancer patients and their caregivers and was perceived to be more severe by caregivers. Our study also showed that burden was the factor most predicting satisfaction about overall care in both groups.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.2
• /
• pp.120-130
• /
• 2020

This paper solves the problem in underdetermined convolutive mixture by improving the disadvantages of the multichannel nonnegative matrix factorization technique widely used in blind source separation. In conventional researches based on Spatial Covariance Matrix (SCM), each element composed of values such as power gain of single channel and correlation tends to degrade the quality of the separated sources due to high variance. In this paper, level and frequency normalization is performed to effectively cluster the estimated sources. Therefore, we propose a novel SCM and an effective distance function for cluster pairs. In this paper, the proposed SCM is used for the initialization of the spatial model and used for hierarchical agglomerative clustering in the bottom-up approach. The proposed algorithm was experimented using the 'Signal Separation Evaluation Campaign 2008 development dataset'. As a result, the improvement in most of the performance indicators was confirmed by utilizing the 'Blind Source Separation Eval toolbox', an objective source separation quality verification tool, and especially the performance superiority of the typical SDR of 1 dB to 3.5 dB was verified.

• Journal of agricultural medicine and community health
• /
• v.42 no.4
• /
• pp.226-233
• /
• 2017

Objective: The purpose of this study was to describe and understand self-care status of the aged diabetic patients with noncompliance after hospital discharge. Methods: A qualitative research method was used for the study design. The participants were 15 diabetic patients aged 65 or older who had been admitted more than two times for hyperglycemia in the past 1 year in a general hospital in Daegu. Data were collected from November 1 2015 to March 1 2016 through in-depth personal interview. Results: Patients' knowledge level on causes and symptoms of diabetes was low. Most participants rarely and irregularly checked blood sugar at home. They were under a lot of stress from their family. Due to old age and illness they did not have sufficient physical activity and they have had rarely regular meals. They considered the self-care education program unnecessary and there was limitations of accessibility for education. Conclusions: The aged diabetic patients who had the repeat admission did not perform self-care activities properly and had problems especially in blood glucose check, support from their family, and health education after returning home. More personalized and community-based self-management education programs will be necessary.

• Journal of the Korean Dietetic Association
• /
• v.13 no.2
• /
• pp.183-193
• /
• 2007

School foodservice employees are involved with every aspect of ensuring that high quality meals are prepared and they influence student satisfaction. The objective of this study was to identify whether job satisfaction of cooks is affected by their relationships with management. Survey forms that were developed for foodservice dietitians and employees were interviewed. Questionnaires to measure job satisfaction were distributed to 30 schools in the Gyeonggi province and completed by 30 dietitians and 323 cooks. Foodservice cooks' job satisfaction was evaluated by measuring attitudes towards aspects of their job using the modified Smith method(1969). All items in the scales were coded by 4 Likert scale(1: nerver satisfied, 4: very satisfied), then grouped by using factor analyses. Statistical methods used in this study were a $x^2$-test, t-test with SPSS software(version 12.0). The study results were as follows; 1) The demographic data showed that 65.3% of respondents were in their 40s, 96% were married, 68.8% were high school graduates, and 93.5% were contracted employees. Regarding overall experience in their current workplace, 27.9% had been in their position over 5 years and 25.7% said less than 2 years. 2) Most of the school lunches was served in the classroom(73.3%). The cook working was rotated among the employees(90%). Most employees did not use a day's leave of absence per month because they were averse to burdening their coworkers. 3) There were no significant differences in job satisfaction between the cooks' self-evaluation scores(2.92) and those of the dietitians(2.92). Among the factors influencing job satisfaction, dietitians(2.10) perceived that cooks(1.99) were more satisfied with their salaries than was actually the case. The cooks(3.19) rated their level of work satisfaction higher than the dietitians(3.03) perceived it to be. Employees rated their relationship satisfaction as 3.50, but dietitians on the other hand rated it 3.37. Most of the cook respondents want a higher salary and a some kind of employment guarantee. This study provides foodservice managers information useful for design positions that will increase productivity. Future study is needed to determine the factors that will improve job satisfaction and satisfy the employees' needs, which in turn will improve school food service quality.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.38 no.5
• /
• pp.16-26
• /
• 2001

In this paper, we present a new scheduling method called CDSS(Carried-Dependence Self-Scheduling) for efficiently execution of the loop with intra dependency between iterations based on the central queue. We also implemented it on shared memory system using Java language. Also, we study the modification that converts the existing self-scheduling method based on the central task queue for parallel loops onto the same form applied to loop with loop-carried dependences. The proposed method is self scheduling and assigns the loops in three-level considering the synchronization point according to the dependence distance of the loops. To adapt the proposed scheme and modified methods into various platforms, including a uni-processor system, we use threads for implementation. Compared to other assignment algorithms with various changes of application and system parameters, CDSS is found to be more efficient than other methods in overall execution time including scheduling overheads. CDSS shows improved performance over modified SS, Factoring, GSS and CSS by about 0.02, 40.5, 46.1 and 53.6%, respectively. In CDSS, we achieve the best performance on varying application programs using a few threads, which equal the dependence distance.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.12
• /
• pp.39-47
• /
• 2010

This paper proposes a fully-utilized block-based 2D DWT architecture, which consists of four 1D DWT filters with two-channel QMF PR Lattice structure. For 100% hardware utilization, we propose a new method which processes four input values at the same time. On the contrary to the image-based 2D DWT which requires large memories, we propose a block-based 2D DWT so that we only need 2MN-3N of storages, where M and N stand for filter lengths and width of the image respectively. Furthermore, the proposed architecture processes in horizontal and vertical directions simultaneously so that it computes the DWT for an $N{\times}N$ image within a period of $N^2(1-2^{-2J})/3$. Compared to existing approaches, the proposed architecture shows 100% of hardware utilization and high throughput rate. However, the proposed architecture may suffer from the long critical path delay due to the cascaded lattices in 1D DWT filters. This problem can be mitigated by applying the pipeline technique with maximum four level. The proposed architecture has been designed with VerilogHDL and synthesized using DongbuAnam $0.18{\mu}m$ standard cell.