• Journal of Internet Computing and Services
• /
• v.13 no.3
• /
• pp.49-59
• /
• 2012

Throughout developing digital technology, reproduction of image is growing better day by day. And at the same time, diverse image editing softwares are developed to manage images easily. In the process of editing images, those programs could delete or modify EXIF files which have the original image information; therefore images without the origin source are widely spread on the web site after editing. This matter could affect analysis of images due to the distortion of originality. Especially in the court of law, the source of evidence should be expressed clearly; therefore digital image EXIF file without deletion or distortion could not be the objective evidence. In this research, we try to trace the identification of a digital camera in order to solve digital images originality, and also we focus on lens distortion correction algorism which is used in digital image processing. Lens distortion correction uses mapping algorism, and at this moment it also uses interpolation algorism to prevent aliasing artifact and reconstruction artifact. At this point interpolation shows the similar mapping pattern; therefore we want to find out the interpolation evidence. We propose a minimum filter algorism in order to detect interpolation pattern and adjust the same minimum filter coefficient in two areas; one has interpolation and the second has no interpolation. Throughout DFT, we confirm frequency character between each area. Based on this result, we make the final detection map by using differences between two areas. In other words, thereby the area which has the interpolation caused by mapping is adjusted using minimum filter for detection algorism; the second area which has no interpolation tends to different frequency character.

• Korean Journal of Optics and Photonics
• /
• v.21 no.4
• /
• pp.151-160
• /
• 2010

When the optical image stabilization is implemented by moving one of the lens groups in a zoom system, decentration should be considered in the optical design process. Although it is partially possible to calibrate optical performances in an optical system with non-symmetrical elements by using a lot of commercial software, the results of calibrating longitudinal aberrations have some calibration errors because of the lack of precise consideration of decentered optical systems. In particular, the amount of distortion in paraxial ray tracing is different from the experimental value because paraxial ray tracing in the optical system is not useful. In this paper, in order to solve this problem being from various commercial lens design software, the set of equations of paraxial ray tracing in a zoom lens system with the non-symmetrical elements like decentration or tilt are theoretically induced. Then, the methods to calibrate the equations of longitudinal aberrations by using these equations in a non-symmetrical optical system are presented. The method of calibrating longitudinal aberrations can in practice be used to correct hand shaking effects in a zoom lens system.

• Korean Journal of Optics and Photonics
• /
• v.23 no.5
• /
• pp.189-196
• /
• 2012

A floating optical system is a system that moves more than 2 groups to focus at the camera lens. At the camera optics, the floating system that is mainly used is an optical system such as a macro lens which changes magnification very much. When the floating system is assembled and fabricated in the factory, there are differences between the image plane of the sensor and the focal plane of the infinity or macro state. Therefore, in a considerable proportion of cases, the focus adjustment to minimize the difference of BWD(Back Working Distance) is carried out in the process of manufacturing. In this paper, in order to decide the movement of each group in a floating system, we evaluated the rotation angle of CAM for the focus adjustment. We know that the maximum magnification of macro state is corrected by this numerical method for the focus adjustment, too. We investigated the limit of CAM rotation angle of the system by using statistical analysis for CAM rotation angle, which uses the focus adjustment of the floating system with symmetric error factors.

• East European & Balkan Studies
• /
• v.43 no.1
• /
• pp.3-30
• /
• 2019

In order to understand the various cultural interactions caused by the wave of globalization, we need a proper lens that can observe and transmit correctly these phenomena. The result of understanding very differs depending on which lens is used. Translation can be regarded as a lens to communicate with each other in the world where language barriers exist. Literature is a kind of universal cultural heritage combined with the intellectual, artistic and social lifestyle of each society. Introducing this cultural complex, namely literature and impregnating people from other languages with the value of our Korean literature, begin with the correct translation. Translator should act as a literary missionary, not merely a simple communicator. The process of literary translation cannot be achieved by simple linguistic ability because it is a highly human scientific work that requires diverse talents from translators. The right translator for Korean literature in Romania is a person with diverse abilities and social experiences within the cultural framework of Korea and Romania. As the requirements of the translation environment from each country are different, the paradigm of foreign translation literature that Romania wants to accept may be very clear distinctively. With recognizing this characteristic environment of Romania, the value of Korean literature can be effectively spread in Romania. Translators are the creators of another original work. With this in mind, the education of Korean studies in Romania should pay more attention to the nurture of right and capable translators.

• Applied Science and Convergence Technology
• /
• v.24 no.5
• /
• pp.172-177
• /
• 2015

We present disordered moth eye structures on curved surfaces fabricated by dry etching of thermally dewetted metal nanoparticles. This lithography-free fabrication allows the formation of subwavelength scale nanostructures on the strongly inclined surfaces such as ball lens as well as on the microlens arrays with low curvature. In particular, we found that the size and average distance of nanostructures are closely related to the inclined angle of the surface. Experimental results on oblique angle deposition of metal thin films followed by thermal dewetting also support these effects.

• Journal of the Korean Ceramic Society
• /
• v.46 no.1
• /
• pp.102-107
• /
• 2009

This study has been focused on an effective surface finishing method combining ELID (ELectrolytic In-process Dressing) and MAP (Magnetic Assisted Polishing) for the nano-precision mirror grinding of glass-lens molding mould. ELID grinding is an excellent technique for mirror grinding of various advanced metallic or nonmetallic materials. A polishing process is also required for elimination of scratches present on ELID grinded surfaces. MAP has been used as polishing method due to its high polishing efficiency and superior surface quality. It also presents some techniques for achieving the nanometer roughness of the hard material such as WC-Co, which are extensively used in precision tooling material.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.3
• /
• pp.61-68
• /
• 2013

Automatic measurement system is required since cycle time and cost of production are increased by various factors in manual systems. This paper presents a machine vision based prototype measurement system for the automotive axisymmetric shape parts which are generally measured by a manual system that is required the tolerance of the part is very small on each machined surface. This measurement system adopts a method in which optical lens is transferred along the profile of the part to minimize measurement cycle time. The main interest of this paper is a development of an optimum measurement algorithm to the outside diameter of the parts that can be applied to various combinations of hardware. The operating system used to implement the whole system is Window XP and corresponding environment.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2821-2823
• /
• 2005

When we deal with the image data through camera lens, much works are necessary for removing image distortions and obtaining accurate informations from the raw data. However, the calibration process is very complicated and requires many trials and errors. In this paper, 3 new approach to image processing is presented by developing a H/W vision system with a tracking camera. Using motor control with encoders the proposed tracking method tells us exact displacements of a moving object. Therefore this method does not require any calibration process for pin cusion. Owing to the mobility one camera covers wide ranges and, by lowering its height, the camera also obtains high resolution of the image. We first introduce the structure of the motion analysis system. Then the construced vision system is investigated by some experiments.

• Journal of the Optical Society of Korea
• /
• v.15 no.3
• /
• pp.300-304
• /
• 2011

Optical microscopes are widely used for medical imaging these days, but biopsy is a lengthy process that causes many problems during the ex-vivo imaging procedure. The endo-microscope has been studied to increase accessibility to the human body and to get in-vivo images to use for medical diagnosis. This research proposes a multi-modal confocal endo-microscope for bio-medical imaging. We introduce the design process for a small endoscopic probe and a coupling mechanism for the probe to make the multi-modal confocal endo-microscope. The endoscopic probe was designed to decrease chromatic and spherical aberrations, which deteriorate the images obtained with the conventional GRIN lens. Fluorescence and reflectance images of various samples were obtained with the proposed endo-microscope. We evaluated the performance of the proposed endo-microscope by analyzing the acquired images, and demonstrate the possibilities of in-vivo medical imaging for early diagnosis.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.6 no.3
• /
• pp.9-15
• /
• 2007

Three methods for grinding: cross grinding, slanted tool axis grinding and parallel grinding, were carried out to study the machinability of tungsten carbide mold for glass formed aspherics lens. In our research, the optimum grinding conditions were investigated in terms of feed-rate, relative velocity of wheel and work piece, tool marks and surface roughness. It is shown that cross grinding are most effective in removal ratio but poor in surface roughness. In addition, tool marks of each method were differentiated on direction and shape.