• Tunnel and Underground Space
• /
• v.15 no.2 s.55
• /
• pp.137-144
• /
• 2005

An estimation technique of the joint diameter distribution using the least square method is suggested. When utilizing the technique by Song and Lee, the diameter distribution would be obtained only from the trace length distribution defined in an infinite window after the trace length distribution is estimated from the contained trace length distribution. With the new technique, however, the diameter distribution can be directly obtained from the sample histogram of the contained trace lengths. Compared with the previous technique, it shows a more accurate result for small sizes of joint samples and provides the joint geometry parameter of volumetric frequency. Verification of this new technique was completed by using Monte Carlo simulations.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.48 no.4
• /
• pp.474-482
• /
• 2015

This study aims to investigate the patterns and incidence rates of morphological deformities during artificial fingerling production of blackhead seabream (BSB, Acanthopagrus schlegeli) juveniles by visual and soft X-ray observations of BSB juveniles (n=881) collected from four industrial hatcheries. Using both methods, we observed seven types of external deformity ($11.2{\pm}4.4%$) and eight types of skeletal deformity ($53.4{\pm}5.1%$). Lordosis occurred in all hatcheries with the highest frequency and the mean frequency was $13.1{\pm}4.4%$ (24.5% in total abnormal) by soft X-ray. Although they had a similar standard length (SL), juveniles with lordosis had a significantly lower condition factor and body weight than normally developed juveniles (P<0.05); normal distribution curves of histogram of body proportions, i.e., body height (BH)/head length (HL) and trunk (=SL-HL)/BH, indicated differences between normally developed juveniles and those with lordosis. In addition, 59% of juveniles with lordosis had vertebral curvature of less than $20^{\circ}$, generally at the $17^{th}$ vertebrae. It is expected that the above results will be used as basic data necessary for determining the cause of lordosis and for developing techniques to prevent this symptom in the fingering production industry of BSB juveniles.

• The Journal of the Petrological Society of Korea
• /
• v.18 no.4
• /
• pp.315-336
• /
• 2009

We have studied the orientational characteristics of microcrack frequency, it's length and density in Tertiary crystalline tuff from the northeastern part of the Gyeongsang Basin. 134 sets of microcracks on horizontal surfaces of 3 rock samples from Heunghae-eup were distinguished by enlarged photomicrographs of the thin sections. The variability in patterns among microcrack length-frequency histograms for three rock samples from different altitudes were derived. The pattern of histograms changes progressively from negative exponential form to log-normal form in proportion to altitude. The distribution pattern for rock sample no.1 from lower altitude shows the broad length distribution characterized by higher mean and median, and higher standard deviation. Meanwhile, this distribution pattern corresponds with characteristics of joint length distribution in sedimentary rocks of the lower part of the Gyeongsang Supergroup. The occurrence frequency of shorter microcracks increases toward both NW and NE directions from the $N0{\sim}10^{\circ}W$, with the dominant direction of $N80{\sim}90^{\circ}W$ and $N80{\sim}90^{\circ}E$, respectively. This distribution pattern represents the relative differences in formation timing among microcrack sets and the result of the new initiation of shorter microcracks. Meanwhile, the longest microcracks within $N60{\sim}70^{\circ}W$($L_{max}$:1.18 mm) and $N0{\sim}10^{\circ}W$($L_{max}$:0.80 mm) directions are seen, but this kind of microcracks are very limited in number. Whole domain of the directional angle($\theta$)-frequency(N), length(L) and density($\rho$) chart can be divided into five sections in terms of phases of the distribution of related curves. From the distribution chart, density curve shows five distinct peaks in the WNW-ESE($N70{\sim}80^{\circ}W$), NS~NNE-SSW($N0{\sim}10^{\circ}W$, $N10{\sim}20^{\circ}E$), ENE-WSW($N50{\sim}60^{\circ}E$), and nearly EW($N80{\sim}90^{\circ}E$) directions, respectively. Especially, main directions of faults correspond with the directional angle showing high density. Consequently, these distribution patterns of density curve reflect the representative maximum principal stress orientations suggested in previous studies.

• Journal of information and communication convergence engineering
• /
• v.5 no.2
• /
• pp.126-130
• /
• 2007

This paper proposes a method that automatically extracts characteristics of cracks such as length, thickness and direction, etc., from a concrete surface image with image processing techniques. This paper, first, uses the closing morphologic operation to adjust the effect of light extending over the whole concrete surface image. After applying the high-pass filtering operation to sharpen boundaries of cracks, we classify intensity values of the image into 8 groups and remove intensity values belong to the highest frequency group among them for the removal of background. Then, we binarize the preprocessed image. The auxiliary lines used to measure cracks of concrete surface are removed from the binarized image with position information extracted by the histogram operation. Then, cracks broken by the removal of background are extended to reconstruct an original crack with the $5{\times}5$ masking operation. We remove unnecessary information by applying three types of noise removal operations successively and extracts areas of cracks from the binarized image. At last, the opening morphologic operation is applied to compensate extracted cracks and characteristics of cracks are measured on the compensated ones. Experiments using real images of concrete surface showed that the proposed method extracts cracks well and precisely measures characteristics of cracks.

• International Journal of Highway Engineering
• /
• v.3 no.4 s.10
• /
• pp.137-146
• /
• 2001

Pavement distresses are one of the most important data for pavement management systems. Inspection machines and its related programs have been used for operating tools in PMS developed in advanced countries. In Korea imported machines and programs for the length price ale utilized to get information of pavement condition from the field This study is launched for developing the program which can detect cracks on asphalt pavement due to many drawbacks in current PMS operation such as improper maintenance work and long resting period when it was broken. The focus of this study is to define principles to analyze pavement surface with digital image processing techniques, to test property of pavement images and to suggest an algorithm that reduces noises at test. To test images, the camera attached on the Automatic Road Analyser(ARAN) was used. Through the FFT images, histogram and statistical values of pavement images, it was found that the images had many noises with high-frequency components against general images, and it was difficult to subdivide pavement images into background or crack. Through several testing with various filters for noise reduction a 3X3 median filter was suggested to reduce noises effectively.