• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.6
• /
• pp.106-112
• /
• 2015

Many researchers have proposed analytical methods to measure the adsorption of di-sulpho fluorescent whitening agents (D-FWAs), but practical methods for D-FWA utilization in an actual paper mill have not been established. In particular, the D-FWA adsorption behavior must be monitored in paper mills to ensure the effective use of D-FWAs. This study used the zeta-potential of pulps as an indicator of the adsorption behavior of a D-FWA. We identified the relationship between the actual adsorption of the D-FWA and the zeta-potential of the pulps as a function of D-FWA addition. zeta-potential measurements were then used to analyze the D-FWA adsorption behavior under different conditions of pulp type, conductivity, and pH. The actual adsorption of a D-FWA was proportional to the ${\Delta}zeta-potential$ of the pulps (i.e., the difference between the zeta-potential of a pulp containing no D-FWA and one containing the D-FWA). The ${\Delta}zeta-potential$ of the pulps was therefore adopted for adsorption analysis. A higher adsorption of the D-FWA was observed onto Hw-BKP than onto Sw-BKP because of the shorter fiber length and higher fines content of Hw-BKP. A high conductivity and an acidic pH decreased the D-FWA adsorption because of direct effects of high ion concentrations and low pH on the D-FWA solubility. Therefore, a D-FWA must be added to Hw-BKP under low conductivity conditions and at neutral or alkaline pH to optimize the D-FWA adsorption.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.357-357
• /
• 2012

박막트랜지스터의 전극으로 Au, Ag, Mo, ITO와 같은 물질들이 이미 많이 연구되어 왔으며, 투명 Source/Drain 전극을 활용한 물질로는 ITO에 초점이 맞춰져 왔다. 하지만 ITO의 높은 가격과 Indium의 인체 유해한 독성 때문에 ITO를 대체하는 물질에 대해 많은 연구가 진행되고 있다. 그 중 Al이 도핑된 ZnO (AZO) 는 가시광 영역에서 85% 이상의 높은 투과율과 높은 전도성, 낮은 비저항으로 다양한 광전소자의 전극과 윈도우 물질로 많은 응용 가능성을 보여주고 있다. 본 실험에서는 고 품질의 박막성장이 가능하고, 박막의 두께를 세밀하게 조절할 수 있는 Pulsed Laser Deposition (PLD) 을 이용하여 온도변화에 따라 AZO 박막을 성장시키고 구조적, 전기적, 광학적 특성을 조사하였다. 또한 온도변화가 AZO 박막 특성에 미치는 영향을 분석하여 Source/Drain 전극으로 사용하기 위한 조건을 최적화하였고, 실제 투명박막트랜지스터 제작을 통해 소자의 I-V Curve 와 Transfer 특성을 확인하고, Transfer Length Method 방법을 이용하여 투명박막트랜지스터의 접촉저항, 채널 비저항 등을 확인해 보았다. 소결된 타겟으로는 99.99%의 순도를 갖는 ZnO-$Al_2O_3$ (98:2 wt%) 타겟을 이용하였으며, 장비조건으로는 355 nm의 파장대역을 갖는 Nd:YAG 레이저를 사용하였고, 실험변수로는 온도범위 RT, $200^{\circ}C$, $400^{\circ}C$, $600^{\circ}C$에서 실험을 진행하였다. AZO 박막의 구조적, 전기적 특성을 분석하기 위해 각각 X-Ray Diffraction (XRD), Hall measurement 장비를 사용하였으며, 광학적 특성을 분석하기 위한 투과도의 측정은 UV-Visible spectrophotometer 장비를 사용하였다.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.9 no.3
• /
• pp.1-7
• /
• 1985

연구의 목적은 의류생산에 있어서 동양(Oriental women)과 서양여자(Caucasian women: U.S.A)의 인체계측에 의한 치수의 비교를 하였다. 연구자료는 동양여자 100명과 서양여자 970명의 자료로 비교하였다. 동양여자의 인체계측치는 1981년 4월 일본에서 필자에 의해 수집되고 서양여자의 인체계측치는 1976년 11월부터 1977년 2월 미국(U.S.A by the Quartermaster Corps of the United States Army)에서 인체계측을 한 자료이다. 동양과 서양여자의 인체계측치 중에서 각각 32항목을 선출하여 비교된 것은 높이항목과 길이항목(height-related measurements; height and length), 나비항특(surface measurements; breadth and depth) , 둘레항목(measurement of circumference)이다. 32항목을 평균치의 t-test로 동양인과 서양인을 비교한 결과, 모든 항목에서 P<.001 수준에서 유의한 차를 보였다. 그 중에서 머리둘레, 목둘레, 손목둘레, 팔굼치둘레, 손바닥둘레의 항목에서는 동양인이 서양인에 비해서 큰 값을 나타냈다. 그 외에 27개 항목은 동양인이 전부 높거나, 길거나, 또는 큰 값을 나타냈다. 표준편차에서 보이는 바와 같이 서양인자가 동양여자보다 크고, 특히 높이 항목, 길이항목(height-related measurements)이 더 높거나 길다. 이러한 결과로서 동양과 서양여자의 인종적인 측면에서, 다양한 의류생산에 있어서 고려해야 할 것 같다. 이 동양과 서양여자의 인체계측비교에 중요한 요점을 두고 연구한 것은 의류생산과정에 있어서, size설정, 보다 미적인 design, 의복구성을 위한 등등에 고려되겠으나, 특히 미국과 같은 대량생산국에서 동양과의 무역(import or export)에 있어서 중요하게 고려가 될것이며, 나날이 발전하는 우리나라의 의류무역에도 고려되리라 본다. 뒤에 recommendations for future research에서 말한 바와 같이 서양과 한국여자의 입체계측비교를 하며 우리나라의 의류무역(수출)에 도움이 되었으면 한다.

• Journal of Fashion Business
• /
• v.5 no.4
• /
• pp.144-157
• /
• 2001

The purpose of this study was to research on breast shape and size to suggest a brassiere sizing chart for elderly women. For this purpose 90 elderly women aged between 55 and 69 were sampled at random to review their breast types by age group, and thereby, suggest the basic measurements and production ratio of each brassiere size in reference to KS K 0070: 1999. The collected measurement data were processed statistically using the SPSS PC/WIN program for technical statistical analysis. The results of this study can be summarized as follows; 1. Analysis of Breast Measurements To find out difference among age groups, the 90 subjects were grouped into three(Group 1 ; aged 55 to 59, Group 2 ; aged 60 to 64, Group 3 ; aged 65 to 69). The results of the comparative analysis of anthropometric data from three groups show that getting older;- Various length measurements related to the drooping degree of breast were increased. It was found that the older group in their 65-69's had more drooping breasts than their 55-59's or 60-64's counterparts. Such findings suggests that older women's drooping can be corrected by a brassiere which serves to support the breasts. 2. Suggestions on a Brassiere Sizing For the basic measurements of brassiere parts for the elderly women, the correlation between underchest circumferences and cup sizes were analyzed. 3% or higher occurrences among the whole sample elderly women were included in the brassiere sizes. thus, the under-chest measurements were set at four intervals from 75 to 95, while the cup measurements were determined also at four intervals from "AAA" to "B" sizes. The resultant 6 sizes excluding the least frequent occurrences covered 73.2% of the sample elderly women actual breast sizes. As a consequence of reviewing the production ratio of each brassiere size for the women, it was found that the brassiere size of highest production ratio was "85A" (17.4%), followed by 80A (14.5%), 85AA 90A (10.1%) and 75A (8.7%) in their order.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.2
• /
• pp.282-297
• /
• 1996

The effective construction for ready-made clothes is one of the central concerns of both consumers and manufactuers in today's apparel industry. In order to reduce the burden of stocks and increase clothing fitness, systematic information on typical body sizes and somatotypes is essential. The purpose of this study i-: to provide basic data on young women's somatotypes for form designers and pattern makers. The subjects of the survey were 310 women of 18 to 26 years old. The study collected 84 anthropometric data for each Person. The data was analyzed by using of the multivariate method. The factor analysis was utilized in regard to the 65 items obtained from anthropometric measurement respectively. The principal component analysis was applied to the data with orthogonal rotation after extraction. The factor scores used in the factor analysis became the basis of determining the value of each variable of the cluster analysis. The cluster analysis was applied for identifying typical somatotypes. Ward's minimum variance method was applied for the purpose of extracting distance metrix by the standardized Euclidean distance. The element forming each cluster can be subdivided into several sets by crosstabulation which is obtained by the fastclus of the SAS. This research has demonstrated 3 distinctive types of silhouette contour of the trunk. Incidentally it also identified 4 of the lower body from the waistline to thigh contour respectively. The discriminant analysis showed that the most significant discriminant factor of the trunk classification were side neck point -1 scapular -1 waistiline length and waist girth. In Korea, the average somatotype of female college students tends to be tall, slim and straight. Reviewing the relationship between the classifications of three parts of body, they are related to each other to some extent but their distribution are not constant. Therefore, in view of clothing construction, a proper separation of the body surface is a necessity.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.1
• /
• pp.18-28
• /
• 2003

The purpose of this study is to provide total data of real body-type and self-evaluation about it. The subjects were 614 middle-aged women between 35 and 59 years old. Data were collected through measurement and a questionnaire survey on self-evaluation. The results of self-evaluation of body are as follows; 1. As the result of the recognition degree analysis, people consider themselves thicker, shorter or smaller than what they really we, regardless of ages and types. In addition, the women of younger group rather than the women of older group consider themselves bigger/thicker and shorter than what they really are. They think that the items of waist girth, abdominal girth, hip girth, upper arm girth. and thigh girth are thicker than the other items, however, among girth items the size of bust girth is smaller than the other items. The women of the late middle-aged group consider their somatotype thicker/bigger and shorter than the women of the early middle-aged group do. 2. As the result of body cathexis for each part, women in general rum out themselves not to be satisfied with their body parts, regardless of ages and types. Particularly, they are not satisfied with abdominal girth, weight, hip girth. According to the age bracket, the women in the older group are more satisfied than the women of younger group in terms of their body. According to somatotype, women in tall and slim groups are more satisfied with their body. The women of the early middle-aged group turn out not to be satisfied with girth items while the women of the late middle-aged group are not satisfied with length items.

• Journal of Sensor Science and Technology
• /
• v.4 no.3
• /
• pp.9-14
• /
• 1995

For the development of liquid density measuring sensor using the natural frequency of a pipe, its principle and construction method were described. The stainless steel pipe, which has length of 32 cm, inside diameter of 2.3 cm and outside diameter of 2.5 cm, was used for the sensor. The exciting coil and the photo sensor were used to excite and to pick-up it, and the feedback circuit was designed to continue its vibrating. The natural frequency was consistent with the result of the spectrum analysis. It had a linearity of 0.0027 % and a sensitivity of 0.032 % in liquid density range from $0.8\;g/cm^{3}$ to $1.4\;g/cm^{3}$ and its frequency variation ratio was 0.024 $%/^{\circ}C$ in temperature range from $10^{\circ}C$ to $35^{\circ}C$.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.20 no.1
• /
• pp.1-5
• /
• 1984

The author carried out an experiment for the dynamical swimming force of crusian carp, Carassius carassius. The experimental water tank was made of 4mm thick transparent acryl board in the right hexahedral shape (400L$\times$240W$\times$800H mm). The water temperature in the tank ranged 20.6$^{\circ}C$ to 21.2$^{\circ}C$. The water level in the tank was maintained 70cm high from the bottom. The measurement of the swimming force was carried out by use of strain gauge. The results obtained can be summarized as follows: 1) The momentary maximum swimming force F sub(M) (g) and the sustainable maximum swimming force F sub(s) (g) can be expressed as a function of the body weight W(g). F sub(M) =1.45W, F sub(s) =0.29W where the momentary maximum swimming force means the highest value, and the sustainable maximum swimming force means the mean high value sustained for 4 to 5 seconds presented in the recording paper. 2) F sub(M) and F sub(s) can be expressed as a function of the body length L(cm). F sub(M) =0.11L super(2.63), F sub(s) =0.15L super(1.77) 3) The coefficient of hydraulic resistance for crusian carp was derived as 0.287.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.43 no.4
• /
• pp.347-354
• /
• 2007

This paper describes on the real-time monitoring of net setting and hauling process for fishing operations of Danish seine vessels in the southern waters of Korea as an application of a PC based ECDIS system. Tracking of fishing process was performed for the large scale Danish seine vessel of G/T 90 and 350 PS class using the fishing gear which the length of net, ground rope, head rope and sweep line including warp in both sides were 86m, 104m, 118m and 3,200m, respectively. Tracking information for net setting and hauling process was continuously recorded for 23 fishing operations performed on November and December, 2003. All measurement data, such as trawl position, heading, towing course and past track which was individually time stamped during data acquisition, was processed in real time on the ECDIS and displayed simultaneously on the ENC chart. The results indicated that after the separation of a marker buoy from Danish seiner, the averaged running speed of vessel and the averaged setting period while shooting the seine on the course of diamond shape to surround the fish school in the 23 fishing operations were 8.3 knots and 13.1 minutes, respectively. And with the maker buoy taken on board, the averaged running speed of vessel and the averaged towing period while closing the seine on the straight route was 1.0 knots and 47.0 minutes, respectively. After the closing stage of hand rope, the hand rope was towed by the averaged speed of 2.2 knots during the 13.0 minutes. The average area for route of diamond shape swept by sweep lines of the seine in 23 fishing grounds was $709,951.6m^2$. Further investigation is also planed to provide more quantitative tracking information and to achieve more effective surveillance and control of Danish seine vessels in EEZ fishing grounds.

• Fire Science and Engineering
• /
• v.19 no.3 s.59
• /
• pp.58-63
• /
• 2005

Experimental measurements of flames and the product properties were performed for small kerosene pool fires. which is widely used as a fire source of laboratory scale experiments with scaling modeling. The flame length and flickering frequency were investigated for the flame structures, and compared with the theory. Three measurement methods were introduced to clarify the smoke characteristics, i.e. various gas concentrations, smoke density and thermophoretic sampling with transmission electron microscopy (TEM). The yield of carbon dioxide and the consumption of oxygen were proportional to the heat release rate of pool fires, but there is no trend on carbon monoxide emission. Smoke density of turbulent flames was exponentially increased with the heat release rate. The morphology of the soot particle was investigated to address the degree of soot maturing. The results show that the similar smoke morphology between an inverse jet flame and a pool fire exists despite of different combustion controlling mechanisms.