• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1302-1308
• /
• 2010

This study the change of the safety factor before and after the reinforcement were compared by performing the parameter research based on the limit equilibrium analysis regarding the same cross section after carrying out the safety factor before the reinforcement on the virtual section in order to observe the change of the safety factor of the slop reinforced with the slope planting reinforced earth, and the variation of the safety factor according to the increase of the length of the reinforcement materials and the change of the slope height was analyzed. As the result, the reinforcement effect was insignificant at no more than 0.6 of L/H, the reinforcement length ratio when the reinforcement length was increased, as the increase of the safety factor was slow comparing with the non-reinforced slope. At 3.0m of the slope height, reinforcement on the slope is not necessary, and at 3.0m to 5.0m of the slope height, the inclination was not influencing at no less than 0.6 of L/H. At 5.0m to 9.0m of the slope height, the safety factor was mostly secured on the slope at 0.8 of L/H and the over-reinforced slope appeared at no less than 1.0 of L/H. Also, the safety factor increased as the slope height increases and the slope gets steeper till 0.8 of L/H, but the slope steepness affects more on the increase of the safety factor than the reinforcement material, as the reinforcing force by the reinforcement material became steady.

• 패션비즈니스
• /
• 제15권2호
• /
• pp.12-22
• /
• 2011

The purpose of this study is to evaluate the differences of visual image on variations in the shoulder strap and length of the one piece swimsuit. Nine samples were examined: 3 variations of the shoulder strap and 3 variations of the swimsuit length. Data have been obtained from 90 fashion design majors and analyzed using Factor Analysis, Anova, Scheffe's Test and the MCA method. The results of the study are as follows: 1) The visual image, according to changes in the shoulder strap and length of the one piece swimsuit, was composed of attraction factor and boldness factor. Attraction was the most important factor in the one piece swimsuit. 2) The visual images according to changes in the shoulder strap of the one piece swimsuits are ranked in the order of one shoulder strap, strapless and two shoulder straps. They are shown to be wanted to dress - sophisticated image and untidy - unique image. 3) As the swimsuit gets shorter, it has more wanted to dress - sophisticated image and untidy - unique image. 4) The number of shoulder straps and swimsuit length do interact with each other in attraction factor and boldness factor. In attraction factor, one shoulder strap and high cut of the one piece swimsuit has the most wanted to dress - sophisticated image. However two shoulder straps and low cut of the one piece swimsuit has the most not wanted to dress - countrified image. In boldness factor, one shoulder strap and high cut of the one piece swimsuit has the most untidy - unique image. However two shoulder straps and regular cut of the one piece swimsuit has the most tidy - ordinary image.

• 한국의류학회지
• /
• 제40권4호
• /
• pp.591-599
• /
• 2016

This study analyzes the somatotype of tall stature Korean women's lower body for proper slack patterns. The study subjects consist of 350 statures over 165cm in 18-59 aged women's of Size Korea 2010. Descriptive statistics, factor analysis, cluster analysis, ANOVA, Duncan test were used for analysis using SPSS 19.0. The result are as follows: Factor 1 was the horizontal dimension of waist and hip, factor 2 was the vertical dimension of lower body, factor 3 was the horizontal dimension of the lower limbs, factor 4 was the crotch length, and factor 5 was the horizontal dimension of hip. The lower body was divided into 3 types based on analysis of the above factors. Type 1 (46.6%) represented stout type with a thick and medium length of crotch and leg. Type 2 (22.7%) represented a curve type from waist to hip with long crotch length, while short and thin leg. Type 3 (30.7%) was referred as slender type, with short crotch length, while long and thin leg.

• Structural Engineering and Mechanics
• /
• 제80권5호
• /
• pp.585-594
• /
• 2021

Ductility is very important parameter in seismic design of RC members such as beams where it allows RC beams to dissipate the seismic energy. In this field, the curvature ductility has taken a large part of interest compared to the deflection ductility. For this reason, the present paper aims to propose a general formula for predicting the deflection ductility factor of RC beams under mid-span load. Firstly, the moment area theorem is used to develop a model in order to calculate the yield and the ultimate deflections; then this model is validated by using some results extracted from previous researches. Secondly, a general formula of deflection ductility factor is written based on the developed deflection expressions. The new formula is depended on curvature ductility factor, beam length, and plastic hinge length. To facilitate the use of this formula, a parametric study on the curvature ductility factor is conducted in order to write it in simple manner without the need for curvature calculations. Therefore, the deflection ductility factor can be directly calculated based on beam length, plastic hinge length, concrete strength, reinforcement ratios, and yield strength of steel reinforcement. Finally, the new formula of deflection ductility factor is compared with the model previously developed based on the moment area theorem. The results show the good performance of the new formula.

• 대한한방부인과학회지
• /
• 제24권3호
• /
• pp.73-84
• /
• 2011

Objectives: This study examined the recent update of factors affect length and regularity of menstrual cycle and symptoms need for diagnosis in oriental medicine. Methods: For factors, we searched the key word "menstrual cycle length and factor" in ScienceDirect(http://www.sciencedirect.com) and we mainly searched symptoms in the journal of oriental obstetrics & gynecology and text. Results: The result are shown in the Table 1-3. Conclusion: In fact as the fluctuation of menstrual cycle length and regularity is very high in healthy women, we must observe the factor affect menstrual cycle with attention even though rule out disease, operation and HRT etc. these researches show potential to compound oriental medicine care and factor of menstrual cycle change.

• 한국의류학회지
• /
• 제28권8호
• /
• pp.1057-1064
• /
• 2004

Silk, polyester, cotton, and wool fabrics were embroidered with varying stitch length of 3mm, 5mm, and 10mm to examine the difference in fabric shrinkage in terms of sewing direction, fabric thickness, cover factor, stitch length, and fiber type. Warp, filling, and bias direction of sewing resulted in no difference in fabric shrinkage. Within the samples with same stitch length, there was less fabric shrinkage in fabrics with higher fabric thickness or higher cover factor. There was larger shrinkage when sewn with longer stitch length. Comparing fabrics with different fiber types but similar fabric thickness, silk and polyester fabrics showed the smallest fabric shrinkage and wool fabrics showed the largest shrinkage. It is shown that similar fabric shrinkage between silk and polyester is due to the similarity in cover factor.

• 복식문화연구
• /
• 제20권6호
• /
• pp.912-922
• /
• 2012

With a long crotch length and much ease in the hip area, baggy pants are visually expressed in a variety of designs when compared with regular pants. The purpose of this study is to define the image differences of various baggy pants designs according to hip circumference and crotch length ease. To that end, this study deduced the visual image variable of experimental baggy pants and analyzed visual images according to changes in hip circumference and crotch length. Nine baggy pants with different levels of hip circumference and crotch length ease were produced as experimental pants. The image of each pair of experimental baggy pants was evaluated based on pictures taken of the pants worn by a woman in her 20s with a standard body figure. The image assessment team was composed of 105 clothing majors. The research results are as follows. Four visual image factors of experimental baggy pants were extracted: whole body compensation, lower body compensation, hip compensation, and waist compensation. Among the 4 factors, the whole body compensation factor was shown as the most representative factor. The body compensation image was higher with less hip circumference ease in the experimental baggy pants, and more hip circumference ease created the optical illusion of a larger body figure, presenting a significant difference between waist circumference and hip circumference. The lower body compensation factor, hip compensation factor, and waist compensation factor all showed a significant influence on changes in hip circumference ease. This result shows that changes in hip circumference ease exerted more influence on the body compensation image than did changes in crotch length ease. The results of this study provide basic data for predicting visual images according to differences in the level of ease in baggy pants, helping people select clothing suitable to their preferences and body shapes.

• 패션비즈니스
• /
• 제17권6호
• /
• pp.141-157
• /
• 2013

In this study, we analyzed the figure type and lower-body size of Shanghai and Hong Kong adult women in their early twenties using the data obtained from 3D whole body scanners. We also provided concrete information related to women's lower bodies, in terms of crotch width, crotch length, inseam, outseam, slope of waist, etc., among women in Shanghai and Hong Kong. The result may be useful to the Chinese apparel industry when designing trouser pants for adult women. According to the results of the factor analysis for categorizing the body shape of the lower half, 5 factors were obtained: obesity of the lower half factor, height of the lower half factor, length from waist to the crotch factor, factor related to legs, and shape of the abdomen factor. After performing a cluster analysis according to the factor analysis, three clusters were set: Cluster 1 was represented as the lower half growth type, which has a high value in height of the lower half factor and grows in the abdomen part. Cluster 2 was represented as thin legs type, which has a low value in most part compared to the length of leg bones and factors about legs that have high value. Cluster 3 was represented as the obesity type having a high value in the obesity of the lower half factor. Overall, thin legs type achieved a high rate in Shanghai adult women and obesity type received a high rate in adult women living in Hong Kong.

• 대한기계학회논문집
• /
• 제14권1호
• /
• pp.130-137
• /
• 1990

본 연구에서는 Bueckner의 가중함수법을 열충격 문제에 도입하여 열충격 응력 세기계수를 구하고, 평면변형을 파괴인성치와 비교하여 재료가 열충격을 받은 후 파괴 되는 시간을 이론적으로 계산한다. 또한 음향 방출법을 이용하여 파괴시간을 측정하 고 이론치와 비교한다.

• International Journal of Concrete Structures and Materials
• /
• 제8권2호
• /
• pp.99-116
• /
• 2014

The American Concrete Institute (ACI) 318-11 permits the use of the moment magnifier method for computing the design ultimate strength of slender reinforced concrete columns that are part of braced frames. This computed strength is influenced by the column effective length factor K, the equivalent uniform bending moment diagram factor $C_m$ and the effective flexural stiffness EI among other factors. For this study, 2,960 simple braced frames subjected to short-term loads were simulated to investigate the effect of using different methods of calculating the effective length factor K when computing the strength of columns in these frames. The theoretically computed column ultimate strengths were compared to the ultimate strengths of the same columns computed from the ACI moment magnifier method using different combinations of equations for K and EI. This study shows that for computing the column ultimate strength, the current practice of using the Jackson-Moreland Alignment Chart is the most accurate method for determining the effective length factor. The study also shows that for computing the column ultimate strength, the accuracy of the moment magnifier method can be further improved by replacing the current ACI equation for EI with a nonlinear equation for EI that includes variables affecting the column stiffness and proposed in an earlier investigation.