• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.1
• /
• pp.108-114
• /
• 1988

We have developed a program that minimizes the chip area with effective code assignment of microinstructions when the control part of VLSI system is implemented in the PLA. While conventional algorithms are composed of one pass, the algorithm proposed in this paper is composed of two passes and it consists of three principal procedures: a procedure for the determination of the code assignment order, a procedure for the code assignment and a procedure for the reduction of the code length. especially, we have proposed a new method of folding back for the reduction of the code length. We have obtained the result of 4 bit code length and 9 product terms when 11 micro-instructions and 6 microoperations were given as a inputs. Therefore, we have certified that it could be used efficiently for the control part of the processors.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.290-293
• /
• 1996

This paper presents an EMQ model which determines an optimal production run length in a deteriorating machine. It is assumed that a machine is subject to a random deterioration from an in-control state to an out-of-control state with an arbitrary distribution and thus producing constant proportion of defective items. An average cost function and an optimal production run length are determined. A mistake in previous model is found and discussed. A mistake in previous model is found and discussed. Numerical experiments are carried out to see the behavior of the proposed model depending on the cost factors as well as machine parameters, and some interesting behaviors are observed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.2
• /
• pp.154-159
• /
• 2004

A new microflow rate controller for medical injection was developed and evaluated. The flow rate was controlled by changing the friction depth as well as the friction length of the micro-channel. A precise micro-fabrication of the micro-channel was requested for an accurate flow control. The friction depth was inversely proportional to the friction length, which gives a linear flow control to the channel length. The channel groove was fabricated with a plastic material. A rubber containing silicone oil was covered over the groove, which satisfies both lubrication and leakage prevention. The flow controller was validated by performing the numerical simulation and experiment. A good agreement was shown between computation and experiment.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.157-162
• /
• 2003

This Paper presents a robust design of an Electrorheological(ER) damper using Taguchi method. Taguchi method is a robust design method that determines control parameters in the presence of noise effect. Electrode length, electrode gap, base oil viscosity and the weight ratio of ER particles are chosen for the control parameters and the temperature is considered to be a noise factor. The sensitivity of each factor with signal-to-noise(S/N) ratio and analysis of variance are investigated. The analysis results show that the electrode length and base oil viscosity of the ER fluid mostly affect the damping force in the absence of electric field. On the other hand, when the voltage is applied to the ER damper, the electrode length and the weight ratio of ER fluid exhibit significant effect. Based on the Taguchi method, an optimal configuration was designed and the robustness of the designed ER damper was validated by comparing the analysis and experimental results.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.11
• /
• pp.762-768
• /
• 2011

We use floor radiant heating system in the house of commons in winter Floor radiant heating system, which transfer heat by radiation, is one of the energy efficient and comfortable systems that. Floor radiant heating system is configured to be controlled by the room for energy-saving. Proper flow rate to a comfortable heating in the room is important. However, Using a constant speed circulation pump in separate rooms, heating system may cause an imbalance because of the difference of length of coil when operating in the rooms. In this study, our Research team examined heating imbalance due to the variation length through the coil length changes and flow control of the circulation pump.

• Journal of Korean Institute of Industrial Engineers
• /
• v.22 no.3
• /
• pp.351-364
• /
• 1996

This paper presents on EMQ model which determines an optimal production run length in a deteriorating machine. It is assumed that a machine is subject to a random deterioration from an in-control state to an out-of-control state with on arbitrary distribution and thus producing some proportion of defective items. An optimal production run length and a minimum average cost are derived in each of three deteriorating processes; constant, linearly increasing, and exponentially increasing. The model with repair cost is also analyzed. Several mistakes in previous research are found and discussed. Numerical experiments are carried out to see the behavior of the proposed model depending on the cost factors as well as machine parameters, and some interesting behaviors are observed.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.6
• /
• pp.167-171
• /
• 2004

In this paper, we proposed a new method to control the length of carbon nanotube using electrochemical etching. We made a nano probe that was composed of the tungsten tip and multi-wall carbon nanotube. The nano probe was placed on the nano stage and the carbon nanotube on the nano probe was etched in the electrolyte solution with the applied voltage. The overall procedures were done under optical microscope and can be monitored. We can obtain a nano probe with proper length through this procedure.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.5
• /
• pp.354-361
• /
• 2010

The paper presents an efficient computation of optimal tool length for 5-axis mold & die machining. The implemented procedure processes an NC file as an initial input, where the NC data is generated by another commercial CAM system. A commercial CAM system generates 5-axis machining NC data which, in its own way, is optimal based on pre-defined machining condition such as tool-path pattern, tool-axis control via inclination angles, etc. The proper tool-length should also be provided. The tool-length should be as small as possible in order to enhance machinability as well as surface finish. A feasible tool-length at each NC block can be obtained by checking interference between workpiece and tool components, usually when the tool-axis is not modified at this stage for most CAM systems. Then the minimum feasible tool-length for an NC file consisting of N blocks is the maximum of N tool-length values. However, it can be noted that slight modification of tool-axis at each block may reduce the minimum feasible tool-length in mold & die machining. This approach can effectively be applied in machining feature regions such as steep wall or deep cavity. It has been implemented and is used at a molding die manufacturing company in Korea.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.3
• /
• pp.361-369
• /
• 2001

This paper deals with numerical efficiency of nonlinear solution technique for space trusses. It will propose the combined Arc-length method to trace structural behavior after reaching buckling load as opposed to the current Arch-length method. The combined Arc-length method uses the current stiffness parameter as a control variable. It uses Secant-Newton method in stable path and applies Arc-length method in unstable path. To evaluate efficiency of solution technique, the accuracy of solution, convergence, and computing time concerning illustrative numerical examples are compared with the current Arc-length method. It show that the combined Arc-length method, as proposed in this paper, is superior to the current Arc-length method in numerical nonlinear analysis.

• Journal of Bio-Environment Control
• /
• v.25 no.3
• /
• pp.168-172
• /
• 2016

The effect of different exposed length of M.9 rootstock on growth and yield was tested in the new apple cultivars. The 'Seohong', 'Summer Dream', and 'Hongguem' grafted on M.9 rootstock were planted in March 2010. The trees were planted in such a way that the exposed length of the rootstock to be 10, 20 and 30 cm. The result showed that as decreasing exposure length, TCA of 'Seohong', 'Summer Dream', and 'Hongguem' was increased between $3^{rd}$ and $6^{th}$ year after planting. The TCA of 20 cm and 30 cm exposure length showed respectively 70% and 60% in 'Seohong', 88% and 66% in 'Summer Dream', and 55% and 41% in 'Hongguem' of the TCA with 10 cm exposure length on 6-year-old trees. Tree height, canopy width, shoot length and terminal shoot length were also increased according to decreased exposure length in 6-year-old trees. The cumulative yield of three cultivars was higher in the tree with a lower exposure length between $4^{th}$ and $6^{th}$ year after planting. The cumulative yield of 20 cm and 30 cm exposure length showed respectively 77% and 63% in 'Seohong', 85% and 76% in 'Summer Dream', and 73% and 58% in 'Hongguem' of the cumulative yield with 10 cm exposure length in 6-year-old trees. Considering tree growth and yield, the optimum exposure length of M.9 was 10 cm for 'Seohong', 'Summer Dream' and 'Hongguem'.