• Progress in Medical Physics
• /
• v.28 no.3
• /
• pp.106-110
• /
• 2017

The variable density phantom fabricated with varying the infill values of 3D printer to provide more accurate dose verification of radiation treatments. A total of 20 samples of rectangular shape were fabricated by using the $Finebot^{TM}$ (AnyWorks; Korea) Z420 model ($width{\times}length{\times}height=50mm{\times}50mm{\times}10mm$) varying the infill value from 5% to 100%. The samples were scanned with 1-mm thickness using a Philips Big Bore Brilliance CT Scanner (Philips Medical, Eindhoven, Netherlands). The average Hounsfield Unit (HU) measured by the region of interest (ROI) on the transversal CT images. The average HU and the infill values of the 3D printer measured through the 2D area profile measurement method exhibited a strong linear relationship (adjusted R-square=0.99563) in which the average HU changed from -926.8 to 36.7, while the infill values varied from 5% to 100%. This study showed the feasibility fabricating variable density phantoms using the 3D printer with FDM (Fused Deposition Modeling)-type and PLA (Poly Lactic Acid) materials.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.4
• /
• pp.279-288
• /
• 2021

Low-density transplanting is a cultivation technology that reduces labor and production costs. In this study, the growth and yield of several varieties with different tillering characteristics were analyzed in order to establish an appropriate planting density for low-density transplanting. Varieties with Low-Tillering (LT), Medium-Tillering (MT), and High-Tillering (HT) were planted at a density of 37-80 hills/3.3 m². As the planting density decreased, the number of tillers per hill increased, but the number of tillers per square meter of hill decreased, especially for the LT variety. Decreasing density extended the tillering stage, which was longest in the LT variety. As the planting density decreased, SPAD(Soil plant analysis development, chlorophyll meter) values just before heading increased while canopy light interception decreased. Such changes were much greater in the LT variety than in the MT and HT varieties. The heading date tended to be delayed by 0-2 days as the planting density decreased, and there was no difference in the length of the period from first heading to full heading. As the number of spikelets per panicle increased, the number of spikelets per square meter did not differ according to the planting density. Decreasing planting density did not affect the grain weight; nevertheless, the yield ultimately decreased because of the decreasing ripening rate. The optimal planting density for stable low-density transplanting cultivation was determined to be over 50 hills/3.3 m2. In addition, these results suggest that LT varieties should be avoided, since these showed large decreases in growth and yield with decreasing planting density.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.6 no.2
• /
• pp.115-123
• /
• 2003

Oviposition and egg laying is an important physiological and behavioural event in the life cycle of the silkworm, Bombyx mori (L). Oviposition and egg laying is dependent on a number of intrinsic and extrinsic factors viz., neural, hormonal, environmental, physical, behavioral etc for the perpetuation of population. Although, the virgin female moths have fully developed embryos but active egg laying begins under the influence of mating which provides essential copulation stimulus for oviposition. After mating drastic biochemical changes occurred that incites egg laying under the influence of optimum environmental conditions. Weight of pupae as well as larval density has significant role on oviposition and egg laying behaviour in the silkworm wherein high pupal weight and inadequate rearing space affects not only the biology, morphology and physiology but also the oviposition and egg laying. Surface topography, plane of inclination, mating length, age of male moth, temperature and photoperiod etc has significant effect on reproductive physiology of silkworm. An attempt has been made in this review article to elucidate briefly the works carried out on mating behaviour, direct and indirect copulation stimulus, vitellogenesis, influence of environmental factors besides effect of weight of pupae and or pharate adult and larval density on oviposition and egg laying behavior in the silkworm, B. mori and its significance in silkworm seed production.

• Journal of ILASS-Korea
• /
• v.22 no.1
• /
• pp.13-21
• /
• 2017

The fog screen is a device projecting the media to the aerosol flow field. As major parameters to generate dense and steady fog screen, shear stress, optical blockage ratio and SMD were obtained result through experiment. The micro droplet was generated by the piezo oscillation element, and the aerosol flow mixed with an air flow was sprayed into the vertical direction from the top of the fog screen through the 280 mm slot. For produce a dense, uniform fog screen, the shear effect, optical blockage ratio and SMD between aerosol and air curtain were measured. The minimum and maximum shear stress conditions were selected and it was confirmed that the optical transmission deviation of the aerosol flow field was small when the aerosol and air curtain flow rates were changed. When the aerosol and air curtain flow power were 18 V (1.51 m/s) and 24 V (2.55 m/s), respectively, under the condition of the minimum shear stress and laminar flow, the optical blockage ratios with the spray length were small, and it produced a most stable and high density uniform fog screen by injecting a constant of $10{\mu}m$ or less.

• ALGAE
• /
• v.30 no.1
• /
• pp.49-58
• /
• 2015

In September 2007, reports of respiratory irritation and fish kills were received by the Florida Fish and Wildlife Conservation Commission (FWC) from the Jacksonville, Florida area. Water samples collected in this area indicated a bloom of Karenia brevis, the dinoflagellate that produces brevetoxin, which can cause neurotoxic shellfish poisoning. For the next four months, K. brevis was found along approximately 400 km of coastal and Intracoastal waterways from Jacksonville to Jupiter Inlet. This event represents the longest and most extensive red tide the east coast of Florida has experienced and the first time Karenia species other than K. brevis have been reported in this area. This extensive red tide influenced commercial and recreational shellfish harvesting activities along Florida's east coast. Fourteen shellfish harvesting areas (SHAs) were monitored weekly during this event and 10 SHAs were closed for an average of 53 days due to this red tide. The length of SHA closure was dependent on the shellfish species present. Interagency cooperation in monitoring this K. brevis bloom was successful in mitigating any human health impacts. Kernel density estimation was used to create geographic extent maps to help extrapolate discreet sample data points into $5km^2$ radius values for better visualization of the bloom.

• Korean Journal of Breeding Science
• /
• v.42 no.5
• /
• pp.431-438
• /
• 2010

Anthers of sweet pepper $F_1$ cultivar 'Special' were cultured on Dumas De Vaulx (C medium), supplemented with $0.1mgL^{-1}$ 2, 4-D and $0.1mg{\cdot}L^{-1}$ kinetin with 3% sucrose, and 0.32% phytagel. The calluses obtained were further sub-cultured on Murashige and Skoog (MS) medium without growth regulators for regeneration. Regenerated plantlets were grown in plastic pots under plastic house and characterized their cytological and morphological characters in spring, 2008. Twenty percent plantlets were identified as haploid plants after chromosome and ploidy analysis. Haploid plants contained 12 chromosomes, high stomatal density with small stomatal length as compared to diploid plants. Stomatal length in haploids was 23.3% smaller than diploids. Haploid plants were characterized as small leaf and petiole size, poor vigor, thin stem and short plant height, short internodes and small flower buds, fruit size and fruit weight as compared to diploid plants and most of the haploid fruits were seedless. SP55, SP62, SP68, SP72 and SP77 are found high yielding double haploids with high total soluble content (8.6, 8.7, 9.2, 9.1 and $9.8^{\circ}Brix$, respectively) and desirable fruit shape, and recommended them to exploit as inbred lines for heterosis breeding.

• Steel and Composite Structures
• /
• v.43 no.5
• /
• pp.639-660
• /
• 2022

The bending and buckling behaviours of FG-GRNC laminated sandwich plates are investigated by using novel five-variables quasi 3D higher order shear deformation plate theory by considering the modified continuum nonlocal strain gradient theory. To calculate the effective Young's modulus of the GRNC sandwich plate along the thickness direction, and Poisson's ratio and mass density, the modified Halpin-Tsai model and the rule of the mixture are employed. Based on a new field of displacement, governing equilibrium equations of the GRNC sandwich plate are solved using a developed approach of Galerkin method. A detailed parametric analysis is carried out to highlight the influences of length scale and material scale parameters, GPLs distribution pattern, the weight fraction of GPLs, geometry and size of GPLs, the geometry of the sandwich plate and the total number of layers on the stresses, deformation and critical buckling loads. Some details are studied exclusively for the first time, such as stresses and the nonlocality effect.

• 한국해양학회지
• /
• v.30 no.5
• /
• pp.403-412
• /
• 1995

The present study was performed to determine th growth and production of Mactra veneriformis on the Songdo tidal flat off Inchon. west coast of Korea. Monthly samples were collected from Marc 1989 to September 1990. The size distributions of shell length showed unimodal patterns from March to August 1989. The binodal pattern after September 1989 indicated a recruitment of young clams during this period. The density fluctuated irregularly, but showed a decreasing pattern over time on the whole. The density of the year class 1989 increased markedly after February 1990. The growth in shell length showed three phases during a year, a fast growth phase in spring, a slow growth phase in summer and autumn, and a lag phase in winter. The annual increment in shell length reduced with age. The flesh dry weight showed a peak in late spring just before the spawning period, and another peak in autumn. The length of annuli and the back-calculated flesh dry weight were used to describe the annual growth. The growth in shell length fitted to the von Bertalanffy model and the flesh dry weight to the Gompertz model. The absolute growth rate of the shell length reduced gradually with age. The year class 1985 had the highest L, and the yeat class 1986 the lowest L. The annual growth in weight showed a typical sigmoid curve. The growth rate was maximum at the age of 2 to 3. Year classes of 1984 and 1985 had higher values of W and higher absolute growth rates than those of 1986 and 1987. Maximum absolute growth rates of 1986 and 1987 year classes were recorded at younger ages than 1984 and 1985 year classes. The annual relative growth rates of length and weight decreased exponentially with age. Biomass in flesh dry weight increased till spring and thereafter decreased progressively. Maximum biomass was 134.6g m/SUP -2/ in August 1990. The biomass of 1989 yeat class occupied highest proportion in total biomass. Annual production in flesh dry weight from March 1989 to March 1990 was 67.9 g m/SUP -2/ year/SUP -1/. Cumulative production of 1989 year class was highest among all year classes, and that of year class 1984 was lowest. The production is high in spring and autumn, and very low in summer and winter.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.8
• /
• pp.920-926
• /
• 2012

Wrinkling is a common phenomenon in nature and the shape of a wrinkle can be defined using characteristic dimensions such as pitch, length, amplitude, and density etc. Wrinkle structure can be utilized in various research fields, and especially it has special characteristics when it used in applications of heat transfer; a wrinkly surface has the effect to promote turbulent flow and increasing surface area. However, the generation of wrinkle structures in somewhat regular is not easy. Till now, there are some research works focused on realization of wrinkles in micro scale. However, most of the processes generally requires high precision equipments and high costs, and also there is a limitation to generate the wrinkles in a large area. In this study, we propose a novel method named as a RCO (repetitive contact-and-open) process to fabricate wrinkle structure with low cost and relative easy way. Using the RCO, we fabricated micro-corrugate structures successfully. From the experimental results, we found out the process parameters of RCO, and showed the possibility of RCO to be used in real applications.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.1
• /
• pp.39-47
• /
• 2005

The purpose of this study is to review the prognosis of the TG Osseotite implant(3i Co, USA) placed in partial edentulous area of oral cavity and to suspect the possible causes leading to failure. 124 TG Osseotite implants that had been inserted between 2000 - 2002 were followed up for 2 years(avg : 9.5 months) in function. Medical records, and radiographs were evaluated and analyzed by the over all success rate, gender and age factor, general disease, implant fixture length and diameter, implant site, bone density, and various surgical methods. Chi square test was used statistically. Of the 124 TG Osseotite implants, 9 implants(7.3%) were removed in early phase and 3 implants(2.4%) were in late phase. The cumulative survival rate was 90.2%. The failure of the TG Osseotite implant was closely related with the use of bone graft techniques such as sinus elevation or immediate implantation and not with the age, sex, general disease, implant site, bone density of implanted site. The failure of the TG Osseotite implant was well developed when it was the wide type of implant and it was inserted for single tooth replacement. The developement of peri-implantitis was the most important factor in the failure of the TG Osseotite implant.