• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.4
• /
• pp.444-451
• /
• 1999

The effect of individual density on the growth and survival of Laminaria japonica was experimentally evaluated. Four density treatments of young sporophytes (0.63 cm In maximum length) grown in the laboratory were transplanted to the southeastern coast of Korea and their survivorship and growth rate were measured twice a month from January to July, 1996. Plants showed higher survivorship at low density. Final densities at three lowest densities were similar, ranging from 34 to 38 inds${\cdot}100 cm^{-2}$. Planis at the highest density, however, suffered greater decline than at lower densities, and only 21 plants remained at the end of this study. Mean frond size (length and width) fluctuated throughout the study period at four densities. During the first two mouths after outplanting, mean frond size was negatively correlated with initial density, However, the size was density independent after three months. As stand density increased, size-frequency distribution through time tended to be more positively skewed. The 10 largest plants grew faster in frond size and attained larger size in the lower density. There was a positive relationship between plant size and relative growth rate (or survival). The slope of yield-density (Y-D) relationships at four densities ranged from -0.060 to -0.137. The study suggests that density can strongly affect the survival and growth of this alga. The density-dependent survival and growth patterns, however, were not strictly consistent with those of terrestrial plants.

• Korean Journal of Medicinal Crop Science
• /
• v.3 no.2
• /
• pp.135-139
• /
• 1995

In order to determine the optimum planting density of Perilla frutescens which is suitable for the southern part of Korea, agronomic characters, yield of fresh stem, leaf and seed, and yield components were investigated grown in 1985 and 1986 at Mokpo Branch Station of Crop Experiment Station. The heading date was Aug. $14{\sim}15$ and the blooming period was Aug. $19{\sim}21$ regardless of the difference of plant density, but the longest stem length was 135cm in the plant density of $70{\time}40cm$ and the stem length in the plant density of $80{\time}40cm$ was 134cm. The quantity of fresh weight of stem and leaf and fresh weight of seed was high as 531kg/l0a in the plant density of $80{\time}40cm$. The positive correlation such as $0.7315^*,\;0.9024^{**}\;and\;0.7425^*$ were found between stem length and fresh weight of stem and leaf, stem length and fresh weight of seed, fresh weight of stem and leaf and fresh weight of seed and so high significance was recongnized. In the verification of significance of row spacing, the disperse of the stem length was $55.67^{**}$, that of fresh weight of stem and leaf is $268.50^*$, theat of fresh weight of seed was $16.00^{**}$ and high significance was recognized. In the verification of significance of intrarow spacing, the diperse of stem length was $54.21^{**}$, that of fresh weight of stem and leaf was $2,582.00^{**}$, that of fresh weight of seed was $48.00^{**}$ and then high significance was recognized. Accordingly, the proper plant density of perilla frutescens was 80cm of row $spacing{\time}40cm$ of intrarow spacing.

• The Journal of the Korea Contents Association
• /
• v.21 no.10
• /
• pp.576-593
• /
• 2021

In this study, in order to investigate the factors that affect the percentage of correct answers and the degree of discrimination of the TOEIC test, a regression analysis was performed using corpus indicators that influence correct answer rate and the degree of discrimination for each part derived from the item analysis. The basic calculation word_length, consistency index LSA_overlap_adjacent_sentences, lexical diversity MTLD_VOCD, conjunction All_logical_causal_connectives_incidence, situational model casual_particles_causal_verbs_Ratio, syntactic complexity Left_embeddedness, and syntactic pattern density Infinitive_density were found to have negative effects. These factors that lower the correct answer rate can be utilized when setting learning goals. Vocabulary diversity index MTLD_VOCD, conjunction Additive_connectives_incidence, syntactic pattern density Infinitive_density, and lexical information person1_2_pronoun_incidence were found to have a positive effect. Factors influencing the increase in discrimination may provide important information for developing a learning program.

• Journal of the Korean Society of Safety
• /
• v.16 no.3
• /
• pp.99-105
• /
• 2001

This paper presents results km a series of model tests oil vertically loaded single piles to compare the behaviors of H and pipe piles under the same ground condition. The aims of this paper were to compare the bearing capacity of H-pile md pipe piles under in the same ground condition and to estimate the effect of gravity acceleration and relative soil density. Relative density of soil were made to be 40%, 80% and embedded length of pile on sand was increased by 10, 12, 14, 16 times of the diameter of pile, respectively. As a results of test series, allowable load of H-pile is from 6.4% to 18.2% larger than allowable load of pipe pile in relative density 80% and from 9.1% to 39.4% larger than allowable load of pipe pile in relative density 40%. As a results of numerical analysis, we were predicted behaviour of stress-displacement of pile with model test. In the case of relative density 80% and 40%, bearing capacity of H pile represent from 17.74% to 18.6% larger than allowable load of pipe pile.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.9 no.2
• /
• pp.18-24
• /
• 1989

Computer-aided high frequency ultrasonic is applied to aluminum oxide(85w%, 94w%, 96w%, and 99w%) MOR(modulus of rupture) samples to evaluate mechanical properties such as density variation, pore content, elastic modulus, shear modulus, and poisson's ratio. Ultrasonic wave velocity and attenuation measurement techniques were used as an evaluator of such properties. Pulse-echo C-Scan images with different fate setting method using 50MHz center frequency 1 inch focal length transducer allows evaluation of density variation and pore content. Elastic modulus calculated with the relation of density and ultrasonic velocity. It shows good reliability as compared with resonance method. Sintered density variation of $0.025g/cm^{3}$, that is 0.6% of theoretical density in $Al_{2}O_{3}$ samples can be observed by ultrasonic velocity measurement. Attenuation measurement method qualitatively agree with 4-point fracture testing result concerning of porosity content.

• Korean Journal of Plant Resources
• /
• v.17 no.2
• /
• pp.102-106
• /
• 2004

To determine the optimal planting density of wanggol in southern areas of Korea, Gangsan early local, the highest yielding variety was grown under four different plant density. Yield components such as stem length, number of tiller, stem diameter were highest at the plots with 18 cm row spacing and 18 cm plant spacing. Dry cortex and medulla yield were highest at the plots of 18 cm row spacing and 18 cm plant spacing. Judging from the results reported above, at optimum planting density of wanggol seemed to be 18 cm row spacing and 18 cm plant spacing.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.5C no.6
• /
• pp.246-250
• /
• 2005

The forward voltage drop of IGBT is studied numerically and analytically as a function of gate length. An analytical expression is presented for the first time for the surface potential variation along the channel layer under the gate of IGBT. The surface potential drop and the carrier density near the surface allow calculation of the forward voltage drop of IGBT analytically as a function of the gate length. The voltage-drop in the drift region near the gate decreases exponentially, whereas that on the surface increases linearly with increasing the gate length, the sum of which exhibits an optimum gate length, resulting in a minimum forward voltage drop. Based on the surface potential drop, a remodelling of the forward voltage drop of IGBT is also proposed.

• Steel and Composite Structures
• /
• v.39 no.3
• /
• pp.307-318
• /
• 2021

Utilizing fibers is an effective way to avoid the brittle behavior of the conventional concrete and can enhance its ductility. In particular, propylene fibers can improve concrete properties, including energy absorption, physical and mechanical properties, controlling shrinkage cracks. The increase of fiber density leads to an increase of the overlapping surface of the fiber of concrete and, in turn, a decrease of cracks developed in the concrete. However, the workability of fiber reinforced concrete tends to be lower than the conventional concrete owing mainly to the hairline thickness and excessive concentration of fibers. The low slump of concrete impedes the construction of reinforced concrete members. In this research, we study if the utilization of magnetic water can alleviate the workability issue of young fiber reinforced concrete. To this end, the compressive and flexural strength of four types of concrete (conventional concrete, fiber reinforced concrete, magnetic concrete, magnetic fiber-reinforced concrete) is studied and compared at three different ages of 7, 14, and 28 days. In order to study the influence of the fiber density and length, a study on specimens with three different fiber density (1, 2, 5 kg of fiber in each cubic meter of concrete) and fiber length (6, 12, 18 mm) is undertaken. The result shows the magnetic fiber concrete can result in an increase of the flexural and compressive strength of concrete at higher ages.

• Fisheries and Aquatic Sciences
• /
• v.19 no.3
• /
• pp.13.1-13.8
• /
• 2016

Reproductive phenological pattern on tetrasporophytes and carposporophytes of Grateloupia subpectinata thalli were observed at Yangyang, on the middle east coast of Korea from January to December 2013. DNA sequences of cox1 gene from 48 selected samples were compared to assure that sample collection is single species, and they were all identical G. subpectinata. Density, length and width of thalli were significantly changed monthly. The maximum of density, length and fresh weight occurred in September, and continuous growth was observed during the autumn and winter. Tetrasporophytes were grown dominantly in October and November, whereas carposporophytes were dominated in September and March. Upright thalli disappeared in June and July and then juveniles were abundant in August. There was a significant difference in length between tetrasporophytes and carposporophytes. These reproductive pattern and seasonality together with phenological data of G. subpectinata would provide valuable information about successful seedling supply for aquaculture of the species in the future.

• The Journal of the Petrological Society of Korea
• /
• v.18 no.4
• /
• pp.315-336
• /
• 2009

We have studied the orientational characteristics of microcrack frequency, it's length and density in Tertiary crystalline tuff from the northeastern part of the Gyeongsang Basin. 134 sets of microcracks on horizontal surfaces of 3 rock samples from Heunghae-eup were distinguished by enlarged photomicrographs of the thin sections. The variability in patterns among microcrack length-frequency histograms for three rock samples from different altitudes were derived. The pattern of histograms changes progressively from negative exponential form to log-normal form in proportion to altitude. The distribution pattern for rock sample no.1 from lower altitude shows the broad length distribution characterized by higher mean and median, and higher standard deviation. Meanwhile, this distribution pattern corresponds with characteristics of joint length distribution in sedimentary rocks of the lower part of the Gyeongsang Supergroup. The occurrence frequency of shorter microcracks increases toward both NW and NE directions from the $N0{\sim}10^{\circ}W$, with the dominant direction of $N80{\sim}90^{\circ}W$ and $N80{\sim}90^{\circ}E$, respectively. This distribution pattern represents the relative differences in formation timing among microcrack sets and the result of the new initiation of shorter microcracks. Meanwhile, the longest microcracks within $N60{\sim}70^{\circ}W$($L_{max}$:1.18 mm) and $N0{\sim}10^{\circ}W$($L_{max}$:0.80 mm) directions are seen, but this kind of microcracks are very limited in number. Whole domain of the directional angle($\theta$)-frequency(N), length(L) and density($\rho$) chart can be divided into five sections in terms of phases of the distribution of related curves. From the distribution chart, density curve shows five distinct peaks in the WNW-ESE($N70{\sim}80^{\circ}W$), NS~NNE-SSW($N0{\sim}10^{\circ}W$, $N10{\sim}20^{\circ}E$), ENE-WSW($N50{\sim}60^{\circ}E$), and nearly EW($N80{\sim}90^{\circ}E$) directions, respectively. Especially, main directions of faults correspond with the directional angle showing high density. Consequently, these distribution patterns of density curve reflect the representative maximum principal stress orientations suggested in previous studies.