Browse > Article
http://dx.doi.org/10.12989/scs.2021.39.3.307

Interaction of magnetic water and polypropylene fiber on fresh and hardened properties of concrete  

Ansari, Mokhtar (Department of Civil Engineering, Bozorgmehr University of Qaenat)
Safiey, Amir (Departmnet of Civil, Environmental, and Architectural Engineering, University of Colorado Boulder)
Publication Information
Steel and Composite Structures / v.39, no.3, 2021 , pp. 307-318 More about this Journal
Abstract
Utilizing fibers is an effective way to avoid the brittle behavior of the conventional concrete and can enhance its ductility. In particular, propylene fibers can improve concrete properties, including energy absorption, physical and mechanical properties, controlling shrinkage cracks. The increase of fiber density leads to an increase of the overlapping surface of the fiber of concrete and, in turn, a decrease of cracks developed in the concrete. However, the workability of fiber reinforced concrete tends to be lower than the conventional concrete owing mainly to the hairline thickness and excessive concentration of fibers. The low slump of concrete impedes the construction of reinforced concrete members. In this research, we study if the utilization of magnetic water can alleviate the workability issue of young fiber reinforced concrete. To this end, the compressive and flexural strength of four types of concrete (conventional concrete, fiber reinforced concrete, magnetic concrete, magnetic fiber-reinforced concrete) is studied and compared at three different ages of 7, 14, and 28 days. In order to study the influence of the fiber density and length, a study on specimens with three different fiber density (1, 2, 5 kg of fiber in each cubic meter of concrete) and fiber length (6, 12, 18 mm) is undertaken. The result shows the magnetic fiber concrete can result in an increase of the flexural and compressive strength of concrete at higher ages.
Keywords
fiber reinforced concrete; magnetic water; polypropylene (PP) fibers; workability; compressive strength; flexural strength;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Ansari, M. and Safiey, A. (2020), "Corrosion effects on mechanical behavior of steel fiber reinforced concrete, including fibers from recycled tires", Comput. Concrete, 26(4), 367-375. https://doi.org/10.12989/cac.2020.26.4.367.   DOI
2 Ansari, M., Daneshjoo, F., Safiey, A. and Hamzehkolaei, N.S. (2019), "Fiber element - based nonlinear analysis of concrete bridge piers with consideration of permanent displacement", Struct. Eng. Mech., 69(3), 243-255. https://doi.org/10.12989/sem.2019.69.3.243.   DOI
3 Gemi, L., Aksoylu, C., Yazman, S., Ozkilic, Y.O. and Arslan, M.H. (2019), "Experimental investigation of shear capacity and damage analysis of thinned end prefabricated concrete purlins strengthened by CFRP composite", Compos. Struct., 229, 111399. https://doi.org/10.1016/j.compstruct.2019.111399.   DOI
4 Kakooei, S., Akil, H., Jamshidi, M. and Rouhi, J. (2012), "The effects of polypropylene fibers on the properties of reinforced concrete structures", Constr. Build. Mater., 27(1), 73-77. https://doi.org/10.1016/j.conbuildmat.2011.08.015.   DOI
5 Karahan, O. and Atis, C.D. (2011), "The durability properties of polypropylene fiber reinforced fly ash concrete", Mater. Design, 32(2), 1044-1049. https://doi.org/10.1016/j.matdes.2010.07.011.   DOI
6 Khorshidi, N., Ansari, M. and Bayat, M. (2014), "An investigation of water magnetization and its influence on some concrete specificities like fluidity and compressive strength", Comput. Concrete, 13(5), 649-657. http://dx.doi.org/10.12989/cac.2014.13.5.649.   DOI
7 Kurtz, S. and Balaguru, P. (2000), "Postcrack creep of polymeric fiber-reinforced concrete in flexure", Cement Concrete Res., 30(2), 183-190. http://dx.doi.org/10.1016/S0008-8846(99)00228-8.   DOI
8 Mazloom, M. and Miri, S.M. (2016), "Effect of magnetic water on strength and workability of high performance concrete", J. Struct. Constr. Eng., 3(2), 30-41.
9 Gemi, L. and Koroglu, M.A. (2018), "Cekme Bolgesi Lifli Beton Olan Cam Fiber Takviyeli Polimer (GFRP) ve Celik Donatili Etriyesiz Kirislerin Egilme Etkisi Altindaki Davranisi ve Hasar Analizi", S.U Muh Bilim ve Tekn Derg, 6(4), 654-667. https://doi.org/10.15317/Scitech.2018.159.   DOI
10 Gemi, L., Koroglu, M.A. and Ashour, A. (2018), "Experimental study on compressive behavior and failure analysis of composite concrete confined by glass/epoxy ±55° filament wound pipes", Compos. Struct., 187, 157-168. https://doi.org/10.1016/j.compstruct.2017.12.049   DOI
11 Gemi, L., Madenci, E. and Ozkilic, Y.O. (2020), "Celik, Cam FRP ve Hibrit Donatili Betonarme Kirislerin Egilme Performansinin Incelenmesi", Duzce Universitesi Bilim ve Teknol Dergisi, 8(2), 1470-1483. https://doi.org/10.29130/dubited.629354.   DOI
12 Izaguirre, A., Lanas, J. and Alvarez, J.I. (2011), "Effect of a polypropylene fibre on the behaviour of aerial lime-based mortars", Constr. Build. Mater., 25(2), 992-1000. https://doi.org/10.1016/j.conbuildmat.2010.06.080.   DOI
13 Su, N. and Wu, C. (2003), "Effect of magnetic field treated water on mortar and concrete containing fly ash", Cement Concrete Compos., 25(7), 681-688. https://doi.org/10.1016/S0958-9465(02)00098-7.   DOI
14 Ubale, P., Pandit, R.D. and Wadekar, A.P. (2016), "Perfromance evaluation of magnetic field treated water on conventional concrete containing fly ash", Int. J. Sci. Technol. Management, 5(2), 68-77.
15 Wei, H., Wang, Y. and Luo, J. (2017), "Influence of magnetic water on early-age shrinkage cracking of concrete", Constr. Build. Mater. J., 147, 91-100. https://doi.org/10.1016/j.conbuildmat.2017.04.140.   DOI
16 Yao, W. (2002), "Flexural strength and behavior of polypropylene fiber reinforced concrete beams 1 introduction 2 experimental", J. Wuhan Univ. Technol.-Mater Sci Ed., 17(2), 54-57. https://doi.org/10.1007/BF02832623.   DOI
17 Yao, W. and Zhong, W., (2007), "Effect of polypropylene fibers on the long- term tensile strength of concrete", J. Wuhan Univ. Technol. Mater. Sci. Education, 22(1), 52-55. https://doi.org/10.1007/s11595-005-1052-z.   DOI
18 Mazloom, M. and Miri, S.M. (2017), "Interaction of magnetic water, silica fume and superplasticizer on fresh and hardened properties of concrete", Adv. Concrete Constr., 5(2), 87-99. https://doi.org/10.12989/acc.2017.5.2.087.   DOI
19 Mydin, A.O. and Soleimanzadeh, S. (2012), "Effect of polypropylene fiber content on flexural strength of lightweight foamed concrete at ambient and elevated temperatures", Adv. Appl. Sci. Res., 3(5), 2837-2846.
20 Johnston, C. D. (2001). "Fiber-reinforced cements and concretes", Taylor and Francis, New York.
21 Zhou, T. and Hua, Y. (2009), "Application study of polypropylene fiber reinforced concrete railway tunnel lining structure within hard rock mass using wet-sprayed technique", Mater. Sci. Forum, 76-80. https://doi.org/10.4028/www.scientific.net/MSF.610-613.76.   DOI
22 Shayanfar, M.A. and Safiey, A. (2008), "Hypoelastic modeling of reinforced concrete walls", Comput. Concrete, 5(3), 195-216. https://doi.org/10.12989/cac.2008.5.3.195.   DOI
23 Aksoylu, C., Ozkilic, Y.O., Yazman, S., Gemi, L. and Arslan, M. H. (2021), "Experimental and Numerical Investigation of Load Bearing Capacity of Thinned End Precast Purlin Beams and Solution Proposals", Teknik Dergi, 32(3), 1-36. https://doi.org/10.18400/tekderg.667066.   DOI
24 Abavisani, I., Rezaifar, O. and Kheyroddin, A., (2017), "Alternating magnetic field effect on fine-aggregate concrete compressive strength", Constr. Build. Mater. J., 134, 83-90. https://doi.org/10.1016/j.conbuildmat.2016.12.109.   DOI
25 Abdel-magid, T.I.M., Hamdan, R.M., Abdelgader, A.A.B., Omer, M.E.A. and Ahmed, N.M.R.A. (2017), "Effect of magnetized water on workability and compressive strength of concrete", Procedia Eng., 193, 494-500. https://doi.org/10.1016/j.proeng.2017.06.242.   DOI
26 ACI Committee 211 (1991), Standard practice for selecting proportions for normal, heavy weight, and mass concrete, Farmington Hills, Mich.
27 Aksoylu, C., Yazman, S., Ozkilic, Y. O., Gemi, L. and Arslan, M. H. (2020), "Experimental analysis of reinforced concrete shear deficient beams with circular web openings strengthened by CFRP composite", Compos. Struct., 249, 112561. https://doi.org/10.1016/j.compstruct.2020.112561.   DOI
28 Aksoylu, C., Ozkilic, Y.O. and Arslan, M.H. (2020), "Damages on Prefabricated Concrete Dapped-End Purlins due to Snow Loads and a Novel Reinforcement Detail", Eng. Struct., 225, 111225. https://doi.org/10.1016/j.engstruct.2020.111225.   DOI
29 Altoubat, S., Ousmane, H. and Barakat, S. (2015), "Effect of fibers and welded-wire reinforcement on the diaphragm behavior of composite deck slabs", Steel Compos. Struct., 19(1), 153-171. https://doi.org/10.12989/scs.2015.19.1.153.   DOI
30 Ozkilic, Y.O., Aksoylu, C. and Arslan, M.H. (2021), "Experimental and numerical investigations of steel fiber reinforced concrete Dapped-End Purlins", J. Build. Eng., 36, 102119. https://doi.org/10.1016/j.jobe.2020.102119.   DOI
31 Richardson, A.E. (2005), "Bond characteristics of structural polypropylene fibres in concrete with regard to post-crack strength and durable design", Struct. Survey, 23(3), 210-230.   DOI
32 Jouzdani, B.E. and Reisi, M. (2020), "Effect of magnetized water characteristics on fresh and hardened properties of self-compacting concrete", Constr. Build. Mater., 242, 118196. https://doi.org/10.1016/j.conbuildmat.2020.118196.   DOI
33 Ozkilic, Y.O., Yazman, S., Aksoylu, C., Arslan, M.H. and Gemi, L. (2021), "Numerical investigation of the parameters influencing the behavior of the prefabricated concrete purlins with and without CFRP strengthening", Constr. Build. Mater., 275, 122173. https://doi.org/10.1016/j.conbuildmat.2020.122173.   DOI
34 Pei, M., Wang, D., Hu, X., Zhao, Y., Xu, Y., Wu, J. and Xu, D. (2004), "Performance characteristics of subdenier monofilament polypropylene fiber reinforced mortars", J. Appl. Polymer Sci., 94(6), 2251-2256. https://doi.org/10.1002/app.20830.   DOI
35 Ramana Gopal, S. and Devadas Manoharan, P. (2004), "Tests on fiber reinforced concrete filled steel tubular columns", Steel Compos. Struct., 4(1). 37-48. https://doi.org/10.12989/scs.2004.4.1.037.   DOI
36 Reddy, K.C. and Subramaniam, K.V.L. (2017), "Experimental investigation of crack propagation and post-cracking behaviour in macrosynthetic fibre reinforced concrete", Mag. Concrete Res., 69(9), 467-478.   DOI
37 Soltani, M., Tetreault, J.R., Eslami, M. and Loreto, G. (2018), "Exploratory Review of Reinforcing Solutions for Precast Concrete 3-D Printing", PCI Convention and National Bridge Conference At:Denver, CO.
38 BS EN 12390-4 (2000), Testing hardened concrete, Compressive strength, Specification for testing machines.
39 ASTM C 143/C 143M - 98 (1998), Standard test method for slump of hydraulic-cement concrete, West Conshohocken.
40 ASTM C78-02 (2002), Standard test method for flexural strength of concrete (using simple beam with third-point loading), West Conshohocken.
41 Daneti, S.B. (2011), "Effect of polypropylene fibres on the shrinkage cracking behaviour of lightweight concrete", Mag. Concrete Res., 63(11), 871-881. https://doi.org/10.1680/macr.2011.63.11.871.   DOI
42 Sharbatdar, M.K., Bazzaz, M., Kashiha, N. and Andalib, Z. (2008), "Behavior of Fiber Concrete under Impact and Explosive Load", Proceedings of the 14th International Civil Engineering Student Conference, Semnan, Iran.
43 Sadeghi, K. Musa M.K and Nassrullah H.M (2019), "Corrosion problems in RC structures: An overview of causes, mechanism, effects, controls and evaluation", Academic Res. Int., 10(2), 15-28.
44 Sadeghi, K. and Nouban, F. (2017), "Behavior modeling and damage quantification of confined concrete under cyclic loading", Struct. Eng. Mech., 61(5), 625-635. https://doi.org/10.12989/sem.2017.61.5.625.   DOI