• Journal of the Korean Society of Costume
• /
• v.55 no.2 s.92
• /
• pp.82-91
• /
• 2005

The purpose of this study is to analyze the style of trousers of Koguryo(高句麗). Trousers of Koguryo were called Go(袴: trousers) and those had various forms according to the shape of gusset(dang, 糖), width and length of the trousers. Commonly the trousers that had worn by Koguryo people had gausset in those bottom not to be shown hip. The gausset was cut triangle or square so if a person wear the trouser with the triangular gausset, the trouser has a pointed hip. Sometimes the trousers had non pointed hips were dicovered in the wall-paintings of the Koguryo tombs, they are thought the trousers that had no gaussets or square one. And also there were another trousers that had wide/narrow legs and long/short legs. Trousers of wide legs were called Gwango(寬袴) and narrow legs Sego(細袴). Gwango(寬袴) grew wider over time and in the late age, the trousers were called Daegugo(大口袴) with wide ends were worn. Trousers were also decorated elaborately with patches on the edges, leg ties, vents, etc.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.22 no.1
• /
• pp.25-34
• /
• 2015

Purpose: This study was conducted to exam the effect of listening to preferred music on patients' anxiety, blood pressure, heart rate, and glucose levels during spinal anesthesia. Methods: A quasi-experimental research design was used. The participants were divided into an experimental group (n=30) and a control group (n=30) undergoing lower leg operations using spinal anesthesia. The mean age was 35.1 years and the mean time of listening to the music was 71.33 minutes. The experimental group was provided with their preferred music selected by each of the participants; the control group was not provided with any music. Results: The state of anxiety was decreased significantly in the experimental group(F=4.14, p=.046). Anxiety (VAS) was also significantly lower in the experimental group (F=4.62, p=.036). Conclusion: The results of the study show that listening to preferred music is an effective method for reducing peri-operative anxiety for patients during spinal anesthesia.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.821-827
• /
• 2001

As one of the advanced design features of the Korea next generation reactor, direct vessel injection (DVI) system is being considered instead of conventional cold leg injection (CLl) system. It is known that the DVI system greatly enhances the reliability of the emergency core cooling (ECC) system. However, there is still a dispute on its performance in terms of water delivery to the reactor core during the reflood period of a large-break loss-of-coolant accident (LOCA). Thus, experimental validation is under progress. In this paper, a new scaling method, using time and velocity reduced linear scaling law, is suggested for the design of a scaled-down experimental facility to investigate the direct ECC bypass phenomena in PWR downcomer.

• Journal of Korean Foot and Ankle Society
• /
• v.18 no.2
• /
• pp.83-86
• /
• 2014

Postpoliomyelitis syndrome is a common neurological disorder that occurs in patients who have experienced paralytic poliomyelitis. Recently, as a result of vaccination against poliovirus, incidence of poliomyelitis is exceedingly low. However, many patients with postpolio syndrome may encounter anesthesia when undergoing surgery, such as for correction of foot deformity and other operations. We report on a 45-year-old woman who experienced paralysis of her contralateral limb after operation on the left foot under spinal anesthesia. Postoperative electromyography/nerve conduction study (EMG/NCS) was performed in order to determine the cause of paralysis. Motor power of the sequelae involved leg showed improvement with time and recovered fully to the preoperative level at six months after the index operation. A precise evaluation, including a physical examination and EMG/NCS, should be performed preoperatively when spinal anesthesia is planned for postpolio syndrome patients.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.1
• /
• pp.1-7
• /
• 2016

In the dentistry field, an ultrasonic surgery unit is widely used in bone cutting and scaling to reduce operation time and minimize hemorrhage. The purpose of this study was to evaluate bone cutting and the effect of a specimen's temperature on the two-type ultrasonic surgery unit using a handpiece moving system(HMS). A HMS, which can cut the bone, was developed to perform the experimental procedure with precision of motion control. Bone specimens were prepared from a combination of epoxy-hardener and cortical bone of bovine leg. Through the bone-cutting experiment, the cutting depth was evaluated by not only scanning electron microscopy, but also Vernier calipers. Also, the temperature distribution was measured by a thermo-graphic camera. This study may be applied methodically in various experimental evaluations on a performance test by a HMS.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11a
• /
• pp.395-400
• /
• 1996

Scoping analyses for the Safety Injection System (SIS) configuration for Korean Next Generation Reactor (KNGR) are peformed in this study. The KNGR SIS consists of four mechanically separated hydraulic trains. Each hydraulic train consisting of a High Pressure Safety Injection (HPSI) pump and a Safety Injection Tank (SIT) is connected to the Direct Vessel Injection (DVI) nozzle located above the elevation of cold leg and thus injects water into the upper portion of reactor vessel annulus. Also, the KNGR is going to adopt the advanced design feature of passive fluidic device which will be installed in the discharge line of SIT to allow more effective use of borated water during the transient of large break LOCA. To determine the feasible configuration and capacity of SIT and HPSI pump with the elimination of the Low Pressure Safety Injection (LPSI) pump for KNGR, licensing design basis evaluations are performed for the limiting large break LOCA. The study shows that the DVI injection with the fluidic device SIT enhances the SIS performance by allowing more effective use of borated water for an extended period of time during the large break LOCA.

• 한국전산유체공학회:학술대회논문집
• /
• 2004.03a
• /
• pp.119-125
• /
• 2004

Unsteady nonlinear wave motions on the free surface over a plane beach of constant slope are numerically simulated using a finite difference method in rectangular grid system. Two-dimensional Navier-Stokes equations and the continuity equation are used for the computations. Irregular leg lengths and stars are employed near the boundaries of body and free surface to satisfy the boundary conditions. Also, the free surface which consists of markers or segments is determined every time step with the satisfaction of kinematic and dynamic free surface conditions. Moreover, marker-density method is also adopted to allow plunging jets impinging on the free surface. The second-order Stokes wave theory and solitary wave theory are employed for the generation of waves on the inflow boundary. For the simulation of wave breaking phenomena, the computations are carried out with the plane beach of constant slope in surf zone. The results are compared with each other. The marker-density method is better then the hybrid method. Also they are compared with other existing experimental results. The Agreement between the experimental data and the computation results is good.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.2
• /
• pp.164-171
• /
• 2006

In this paper, the fault tolerant system for BLDC motor has been proposed to maintain control performance under an open switch fault of inverter. The fault identification is proposed to two methods, which are using the difference between reference and actual current, and adding voltage sensors across lower legs of inverter. The reconfiguration scheme is achieved by the four-switch topology connecting a faulty leg to the middle point of DC-link using bidirectional switches. The proposed fault tolerant system quickly recovers control performance by short fault detecting time and reconfiguration of system topology. Therefore, continuous free operation of the BLDC motor drive system after faults is available. The superior performance of the proposed fault tolerant system is proved by simulation.

• Journal of Power Electronics
• /
• v.16 no.4
• /
• pp.1306-1315
• /
• 2016

Modern power systems driven by high-power converters have become inevitable in view of the ever increasing demand for electric power. The total power loss can be reduced by limiting the switching losses in such power converters; increased power efficiency can thus be achieved. A reduced switching frequency that is less than a few hundreds of hertz is applied to power converters that produce output waveforms with high distortion. Selective harmonic elimination pulse width modulation (SHEPWM) is an optimized low switching frequency pulse width modulation method that is based on offline estimation. This method can pre-program the harmonic profile of the output waveform over a range of modulation indices to eliminate low-order harmonics. In this paper, a SHEPWM scheme for three-phase three-leg neutral point clamped inverter is proposed. Aside from eliminating the selected harmonics, the DC capacitor voltages at the DC bus are also balanced because of the symmetrical pulse pattern over a quarter cycle of the period. The technique utilized in the estimation of switching angles involves the firefly algorithm (FA). Compared with other techniques, FA is more robust and entails less computation time. Simulation in the MATLAB/SIMULINK environment and experimental verification in the very large scale integration platform with Spartan 6A DSP are performed to prove the validity of the proposed technique.

• Journal of Korea Multimedia Society
• /
• v.6 no.4
• /
• pp.714-722
• /
• 2003

Men's clothing has been recently giving higher market shares to the ready-made clothes rather than the custom-tailored clothes. With many active studies on the human body and design, the ready-made clothes win popularity due to their rapid repairing, various design, and cheap prices, though they are not perfect suitable for some people. Therefore the ready-made has a weak point unable to consider all of the individual physical characteristics. However the custom-tailored clothes ate able to make clothing perfectly suitable lot their customers, though they require longer time-taking and expensive costs. In this context, this paper is design and implementation an automatic design edit system to provide a rapid and cheap service for customers on the ground of the custom-tailored clothes. In other words, this paper intended to use computer systems lot rapidly and precisely providing design dependent on the individual physical characteristics including a distorted bodies, types of the leg, and a height of the shoulder. To do so, the paper using not only studies on the human body and the custom-tailored clothes but also technical know-hows planned design for each individual body by LISP language and automatically process the design through CAD system. Consequently, the rapid and precise processing has reduced inventories and production costs, leading to supplying high quality clothes at lower prices.